<<p> EDU ESP32 Board: the power of the ESP32 in an Arduino UNO format for connected projects. </p> <p> <b> Features: </b> </p> <p> Discover the EDU ESP32 board, developed in collaboration with <a href="https://www.upesy.fr/">uPesy</a>, an Arduino UNO-sized board featuring an ESP32 microcontroller with integrated Wi-Fi and Bluetooth BLE. </p> <p> Perfect for connected projects, it offers significantly better performance than a classic Arduino UNO while maintaining compatibility with most UNO shields. </p> <p> Whether you are a beginner or an experienced developer, this board is ideal for getting started with the ESP32 ecosystem or for developing advanced projects. </p> <p> It is compatible with Arduino and MicroPython programming languages and comes with MicroPython pre-installed. </p> <p> <a href="https://fr.vittascience.com/esp32/">You can program the ESP32 board directly on the dedicated Vittascience interface.</a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Microcontroller: ESP32 with integrated Wi-Fi and Bluetooth BLE <li> Operating Voltage: 5 V <li> Input Voltage: 7V to 12V (limit: 6V to 20V) <li> Number of I/O Pins: 14 pins (including 6 PWM) <li> Analog Input Pins: 8 pins <li> Flash Memory: 4 MB <li> USB Connector: USB Type C <li> Dimensions: 70 mm x 55 mm <li> Weight: 25 g </ul> <p> <b> Manufacturer: uPesy </b> </p> >

<EDUESP32>

<<p>Dedicated pack for the classroom containing 10 micro:bit V2 boards, 10 micro-USB cables, and 10 battery holders included.</p> <p><b>For a micro:bit V2 board:</b></p> <p><b>Features:</b></p> <p>Discover the micro:bit V2, an enhanced version of the popular educational board that offers even more power and features.</p> <p>Equipped with built-in sensors such as a microphone, speaker, Bluetooth antenna, and a touch-sensitive logo, this board is perfect for creating interactive and connected projects.</p> <p>It also enables a "power-saving mode," ideal for extending the battery life of your creations.</p> <p>Designed for ease of use, the micro:bit V2 can be powered via a micro-USB port, a JST connector, or the 3V and GND pins, providing great flexibility for different types of educational projects.</p> <p><a href="https://fr.vittascience.com/microbit">You can program the micro:bit board directly on the dedicated Vittascience interface.</a></p> <p><b>Technical Specifications:</b></p> <ul> <li>Microcontroller: nRF52833</li> <li>Number of inputs/outputs: 23 pins (including 6 analog)</li> <li>Built-in equipment:</li> <li>5x5 red LED matrix</li> <li>2 push buttons</li> <li>Microphone</li> <li>Speaker (80 dB at 5 VDC)</li> <li>Touch-sensitive logo</li> <li>Bluetooth 5.1 antenna</li> <li>2.4 GHz radio interface (not Wi-Fi compatible)</li> <li>6-axis accelerometer/gyroscope</li> <li>Clock speed: 64 MHz</li> <li>RAM: 128 kB</li> <li>Available output current: 200 mA</li> <li>Dimensions: 40 mm x 50 mm</li> <li>Weight: 8 g</li> <li>Included: 2 batteries, a battery connector, and a micro-USB cable.</li> </ul> <p><b>Manufacturer: BBC Micro:bit</b></p>>

<MBV2>

<<p>Dedicated pack for the classroom containing 10 micro:bit V2 cards, 10 micro-USB cables and 10 battery cases provided.</p><p>For a micro:bit V2 board:</p><ul><li> Based on a nRF52833 microcontroller, the board is powered via a micro-USB port, JST connector or the 3V and GND pins</li><li> Number of inputs/outputs: 23 pins including 6 analog inputs</li><li> The card has :</li><li> a matrix 5x5 red LEDs</li><li> 2 push buttons</li><li> microphone</li><li> speaker</li><li> touch logo</li><li> bluetooth antenna</li><li> Bluetooth 5.1</li><li> 2.4 GHz radio interface (not WiFi compatible)</li><li> 6-axis accelerometer/gyroscope</li><li> Clock speed: 64 MHz</li><li> RAM memory: 128 kB</li><li> Speaker: 80 dB at 5 VDC</li><li> Available output current: 200 mA</li><li> Size of the card: 40 mm x 50 mm</li><li> Weight: 8g</li></ul><p>Manufacturer : BBC Micro:bit</p><p>Reference : MBV2-CLUB</p>>

<MBV2CLUB>

<<p> Galaxia Board: Learn programming in Python and blocks with a compact and versatile board.</p> <p> <b> Features: </b> </p> <p>The Galaxia Board is an ideal learning platform for high school and middle school students.</p> <p>Compact yet powerful, it provides optimal support for learning programming in Python or blocks.</p> <p> Its color screen allows displaying messages, graphics, and detecting programming errors in real time, making interactive learning easier.</p> <p>The Galaxia excels in local network communication with other Galaxia boards and can be programmed as a web server or WiFi access point, offering great flexibility for connected projects.</p> <p> <a href="https://fr.vittascience.com/galaxia/">You can program the Galaxia board directly on the dedicated Vittascience interface. </a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Microcontroller: ESP32-S2 WiFi Module (240MHz) <li> Display: Color, 128 x 160 pixels <li> LED: 1 RGB LED <li> Audio: 1 audio input/output <li> Buttons: <br> 2 physical buttons (A and B) <br> 4 touch buttons <li> Integrated sensors: <br> Accelerometer <br> Magnetometer <br> Light sensor <br> Ambient temperature sensor <li> Connectivity: <br> 2 Grove ports <br> 1 connector for micro:bit accessories <li> Power supply: Via micro USB connector <li> Compatibility: Compatible with micro:bit accessories and Grove connectors </ul> >

<GALAXIATHINGZ>

<<p> Arduino Uno Rev3 Board: the essential tool for all your electronic prototyping projects. </p> <p> <b> Features: </b> </p> <p> The Arduino Uno Rev3 is the go-to development board for makers and electronics enthusiasts. </p> <p> Based on the ATmega328P microcontroller, it is ideal for fast and efficient prototyping of your projects. </p> <p> With 14 input/output pins, including 6 capable of generating PWM signals, and 6 analog inputs, this board offers maximum flexibility for all types of projects. </p> <p> Its compatibility with a wide range of modules and sensors makes it a preferred choice for developers of all levels. </p> <p> <a href="https://fr.vittascience.com/arduino/"> You can program the Arduino Uno Rev3 board directly on the dedicated Vittascience interface.</a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Operating Voltage: 5 V <li> Input Voltage: 7V to 12V (limit: 6V to 20V) <li> Number of I/O Pins: 14 pins (including 6 PWM) <li> Analog Input Pins: 6 pins <li> Maximum current per pin: 40 mA <li> 3.3 V Pin Current: 50 mA <li> Flash Memory: 32 KB <li> SRAM: 2 KB <li> EEPROM: 1 KB <li> Clock Speed: 16 MHz <li> USB Connector: USB Type A <li> Dimensions: 68.8 mm x 53.4 mm <li> Weight: 25 g </ul> <p> <b> Manufacturer: Arduino </b> </p> >

<A000066>

<<p> Arduino Nano: all the power of Arduino in a compact format for your most demanding projects. </p> <p> <b> Features: </b> </p> <p> The Arduino Nano is the miniature version of the Arduino Uno, offering all its power in a reduced size. </p> <p> Based on the ATmega328 microcontroller, this board is ideal for rapid prototyping, especially when space is limited. </p> <p> It has 14 input/output pins, 6 of which can generate PWM signals, along with 8 analog inputs. </p> <p> Thanks to its small size and light weight, the Arduino Nano easily integrates into the most compact projects while maintaining compatibility with a wide range of modules and sensors. </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Operating Voltage: 5 V <li> Input Voltage: 7V to 12V (limit: 6V to 20V) <li> Number of I/O Pins: 14 pins (including 6 PWM) <li> Analog Input Pins: 8 pins <li> Maximum Current per Pin: 40 mA <li> 3.3 V Pin Current: 50 mA <li> Flash Memory: 32 KB <li> SRAM: 2 KB <li> EEPROM: 1 KB <li> Clock Speed: 16 MHz <li> USB Connector: mini-USB B <li> Dimensions: 45 mm x 18 mm x 18 mm <li> Weight: 7 g </ul> <p> <b> Manufacturer: Arduino </b> </p> >

<A000005>

<<p> Discover the Arduino Uno R4, an enhanced version of the most popular board, perfect for all your prototyping projects with improved performance and new features. </p> <p> <b> Features: </b> </p> <p> The Arduino Uno R4 is the latest evolution of the world's most widely used microcontroller board, offering enhanced performance thanks to its new Renesas RA4M1 microcontroller based on Arm® Cortex®-M4. </p> <p> With its modern USB-C® connector, this board is easy to power (up to 24 V via VIN) and program. </p> <p> It is equipped with a CAN bus for communication with other devices, a 12-bit digital-to-analog converter (DAC), and an integrated operational amplifier, making this board versatile for a wide range of projects. </p> <p> Additionally, the HID support allows the Uno R4 to function as a standard input device, providing even more possibilities for your applications. </p> <p> Example uses: Prototyping, automation, IoT projects, interactive devices. </p> <p> <a href="https://fr.vittascience.com/arduino/"> You can program the Arduino UNO R4 directly on the dedicated Vittascience interface. </a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Operating voltage: 5 V <li> Power supply voltage: 6 V to 24 V <li> Number of input/output pins: 14 pins (including 6 PWM) <li> Analog inputs: 6 pins (ADC) <li> Max current per I/O: 40 mA <li> Current for 3.3 V pin: 50 mA <li> Flash memory: 256 KB <li> SRAM: 32 KB <li> EEPROM: 8 KB <li> Clock speed: 16 MHz <li> USB connector: USB-C® <li> Dimensions: 68.8 mm x 53.4 mm <li> Weight: 25 g </ul> <p> <b> Manufacturer: Arduino </b> </p> <p> This board is a perfect choice for engineers, students, and technology enthusiasts. </p> >

<ABX00080>

<<p> Discover the Arduino UNO R4 WiFi, a powerful and versatile board with WiFi connectivity, perfect for your IoT projects and advanced prototyping needs. </p> <p> <b> Features: </b> </p> <p> The Arduino UNO R4 WiFi is an innovative microcontroller board that combines a 32-bit Renesas RA4M1 processor with built-in WiFi interface, an LED matrix, an RTC circuit, and a Qwiic/Stemma QT connector.</p> <p> Thanks to its powerful processor and WiFi connectivity via the ESP32-S3-Mini module, this board is ideal for connected projects, offering superior processing power while maintaining compatibility with your projects based on the classic Arduino UNO.</p> <p> The USB Type-C port allows for easy programming and convenient power supply, while the HID interface enables the board to function as an input device (keyboard, mouse, etc.).</p> <p> The I2C connector makes it easy to connect modules and sensors from the Qwiic and Stemma QT ecosystems, making this board extremely versatile for IoT project development.</p> <p> <a href="https://fr.vittascience.com/arduino/"> You can program the Arduino Uno R4 WiFi board directly in the dedicated Vittascience interface.</a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Power Supply: Via USB Type-C port <li> 6 to 24 V on 5.5 x 2.1 mm power connector <li> 6 to 24 V on Vin pin <li> Microcontroller: Renesas RA4M1 32-bit <li> Microprocessor: ARM Cortex-M4 <li> Frequency: 48 MHz <li> Flash Memory: 256 kB <li> RAM: 32 kB <li> WiFi Circuit: ESP32-S3-Mini <li> 14 I/O pins, of which 6 are PWM <li> 6 10-bit analog inputs <li> 1 12-bit analog output (via integrated DAC) <li> 1 CAN (requires an external transceiver) <li> 1 I2C bus <li> 1 UART serial link <li> 1 SPI interface <li> Current per I/O: 8 mA <li> I2C interface on Qwiic and Stemma QT connector <li> SWD debugging connector <li> ICSP connector <li> RTC module <li> OFF pin <li> Dimensions: 68.85 x 53.34 mm </ul> <p> <b> Manufacturer: Arduino </b> </p>>

<ABX00087>

<<p> Raspberry Pi Pico W: the compact and powerful WiFi microcontroller board for your connected projects. </p> <p> <b> Features: </b> </p> <p> The Raspberry Pi Pico W is a miniature programmable board equipped with a WiFi interface, built around the RP2040 microcontroller. </p> <p> Ideal for low-power connected projects, it combines the flexibility and power of an ARM Cortex-M0+ Dual Core processor clocked at 133 MHz, with the ease of use of an Arduino® board. </p> <p> Whether you are a beginner or an advanced user, the Pico W allows you to carry out your projects in MicroPython, C/C++, or Python, thanks to detailed documentation and accessible development tools.</p> <p> With its ability to emulate USB HID devices like a keyboard or mouse, the Pico W opens up a wide range of creative applications.</p> <p> It is perfect for small projects that require WiFi connectivity while maintaining a very competitive cost.</p> <p> <a href="https://fr.vittascience.com/pico/"> You can program the Raspberry Pi Pico W (WiFi) on the dedicated Vittascience interface. </a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Power Supply: 5 VDC via micro USB (cable not included) 5 VDC via the VBUS pin <li> Microcontroller: RP2040 <li> Processor: ARM Cortex-M0+ Dual Core at 133 MHz <li> SRAM: 264 KB <li> Flash Memory: 2 MB <li> WiFi Interface: Chip: Infineon CYW43439 Frequency: 2.4 GHz 802.11n Integrated antenna Compatible with WPA3 and SoftAP (up to 4 clients) Interface: SPI <li> Connectivity: 26 GPIO pins including: 23 x digital I/O 3 x analog inputs (12-bit ADC) 2 x UART interfaces 2 x I2C buses 16 x PWM outputs 8 x PIO (Programmable I/O) pins 1 x SWD debug interface USB 1.1 host and device interface via micro-USB port <li> Programmable LED on GP25 <li> Operating temperature: -20 to 85 °C <li> Dimensions: 51 x 21 x 3.9 mm <li> Weight: 3 g </ul> <p> Logic inputs are only compatible with 3.3 VDC (higher voltage would damage the board).</p> <p> This board does not have HDMI, CSI, DSI connectors, and does not run a Linux OS. It is designed as a microcontroller, similar to Arduino® or micro:bit® boards.</p> >

<PICOPIWH >

<<p> Raspberry Pi Pico: Program with the full power of Raspberry in an ultra-mini format.</p> <p> <b> Features: </b> </p> <p> The Raspberry Pi Pico is a fast, versatile, and miniature programmable board designed around the RP2040 microcontroller developed by Raspberry Pi in the UK. </p> <p> It offers exceptional performance at a low cost, while being accessible for both beginners and advanced users.</p> <p> Equipped with an ARM Cortex-M0+ Dual Core processor running at 133 MHz, this board is ideal for prototyping projects that require great flexibility.</p> <p> It features numerous inputs and outputs, as well as advanced functionalities like HID device emulation via its micro-USB port.</p> <p> <a href="https://fr.vittascience.com/pico/"> You can program the Raspberry Pi Pico board directly on the dedicated Vittascience interface. </a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Microcontroller: RP2040 <li> Processor: ARM Cortex-M0+ Dual Core at 133 MHz <li> Memory: <br> SRAM: 264 KB <br> Flash: 2 MB <li> Power supply: <br> 5 VDC via micro USB (cable not included) <br> 5 VDC via the VBUS pin <li> Connectivity: <br> 26 GPIO pins including: <br> 23 x digital I/O <br> 3 x analog inputs (12-bit ADC) <br> 2 x UART interfaces <br> 2 x I2C buses <br> 16 x PWM outputs <br> 8 x PIO (programmable I/O) pins <li> USB Interface: USB 1.1 (host and storage device) <li> Programmable LED: on GP25 <li> Dimensions: 51 x 21 x 3.9 mm <li> Weight: 3 g <li> Operating temperature: -20 to 85 °C </ul> <p> <b> Notes: </b> <p> <p> The logic inputs are only compatible with 3.3 VDC. Higher voltage could damage the board. </p> <p> The Raspberry Pi Pico does not support Linux OS and does not have HDMI, CSI, DSI connectors, etc. Its operation is similar to that of an Arduino® or micro:bit® board.</p> <p> This version is delivered without side connectors.</p> >

<PICOPIH>

<<p> Raspberry Pi 4 Model B - 4GB: the ultimate performance for your computing and multimedia projects.</p> <p> <b> Features: </b> </p> <p> Discover the Raspberry Pi 4 Model B, the latest in the Raspberry Pi range of nano-computers, offering unmatched performance thanks to its Quad-core ARM Cortex-A72 processor clocked at 1.5 GHz and its 4 GB of RAM.</p> <p> This model is ideal for transforming your project into a true mini-computer capable of connecting to two 4K displays, a dual-band Wi-Fi network, and USB 3.0 peripherals for fast transfers.</p> <p> With its Bluetooth 5.0, Gigabit Ethernet interfaces, and compatibility with GNU/Linux and Windows 10 IoT operating systems, the Raspberry Pi 4 B perfectly meets your needs in office tasks, multimedia, and development.</p> <p> This model allows you to perform tasks similar to those of a desktop PC, such as word processing, web browsing, spreadsheet management, and high-definition video streaming.</p> <p> <a href="https://fr.vittascience.com/raspberrypi/"> You can program the Raspberry Pi 4 Model B - 4GB directly on the dedicated Vittascience interface.</a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Processor: ARM Cortex-A72 Quad-core 1.5 GHz <li> RAM: 4 GB LPDDR4 <li> Wi-Fi: Dual-band 2.4 GHz / 5 GHz, 802.11b/g/n/ac (Broadcom BCM43438) <li> Bluetooth: 5.0, BLE compatible (Broadcom BCM43438) <li> Video: Broadcom VideoCore VI at 500 MHz, native 4K support <li> Interfaces: <br> 2 x USB 2.0 ports <br> 2 x USB 3.0 ports <br> 1 x Gigabit Ethernet RJ45 port <br> 2 x micro-HDMI ports for dual 4K @ 60 fps display <br> 1 x micro-SD port for storage <br> 1 x 40-pin GPIO connector <br> 1 x CSI camera interface <br> 1 x DSI display interface <li> Audio outputs: <br> 2 x micro-HDMI with 5.1 audio support <br> 1 x 3.5 mm stereo jack (shared with video) <li> Power supply: 5 VDC / 3 A via USB Type C port (not included) <li> Dimensions: 88 x 58 x 17 mm <li> Weight: 46 g </ul> <p> The Raspberry Pi 4 B requires a 5 VDC / 3 A USB Type C power supply to operate optimally with multiple peripherals.</p> <p> Cases from previous versions of Raspberry Pi are not compatible with this model.</p> <p> This product is supplied without a case, power supply, keyboard, monitor, or mouse, encouraging the use of recycled equipment.</p> >

<PI44GB>

<<p> The Wio Lite AI is a powerful and cost-effective development board designed for vision projects, featuring a high-performance Arm® Cortex®-M7 microprocessor at 550 MHz and advanced wireless connectivity. </p> <p> <b> Features: </b> </p> <p> The Wio Lite AI board is specifically designed for vision and artificial intelligence projects.</p> <p> Based on the STM32H725AE Arm® Cortex®-M7 32-bit microprocessor, it offers a 550 MHz frequency for high computing performance.</p> <p> The board integrates 8 MB of PSRAM and 16 MB of SPI NOR flash memory, ensuring smooth multitasking capabilities and sufficient storage for the operating system.</p> <p> It is also equipped with dual-band Wi-Fi (2.4 GHz/5 GHz) and Bluetooth 5.1 connectivity, enabling efficient wireless communication.</p> <p> The Wio Lite AI is compatible with RGB565/RGB888 LCDs via a 40-pin FPC connector and with DCMI cameras through a 24-pin FPC connector, making it an ideal choice for complex vision applications.</p> <p> Additionally, it supports audio with a 12-pin expansion slot and can be easily powered via a USB Type-C port.</p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Processor: STM32H725AE Arm® Cortex®-M7 32-bit at 550 MHz <li> Memory: <br> 16 MB of SPI NOR flash memory <br> 8 MB of PSRAM <br> Micro-SD card slot for additional storage <li> Connectivity: <br> Dual-band Wi-Fi 2.4 GHz / 5 GHz <br> Bluetooth 5.1 <li> I/O: <br> 6 analog pins <br> 14 digital pins <br> UART, I2C, SPI, CAN, SWDIO <br> I/O level: 3.3 V <br> 40-pin FPC connector for RGB565/RGB888 LCD <br> 24-pin FPC connector for DCMI camera <br> 12-pin audio expansion slot <li> Power Supply: 5V via USB Type-C <li> Dimensions: Compact and suitable for easy integration into various projects </ul> <p> The Wio Lite AI is an essential tool for developers looking to create efficient and cost-effective vision and artificial intelligence solutions.</p> >

<102110607>

<<p> NUCLEO-L476RG: the versatile STM32 development board for your prototyping projects. </p> <p> <b> Features: </b> </p> <p> The NUCLEO-L476RG from <a href="https://www.st.com/content/st_com/en.html">STMicroelectronics</a> is a powerful development board designed to simplify the prototyping of complex electronic projects.</p> <p> As part of the Nucleo series, it offers a fast and cost-effective platform to fully exploit the potential of STM32 microcontrollers.</p> <p> Compatible with Arduino Uno shields, this board allows for easy expansion of its capabilities by adding additional modules.</p> <p> It is equipped with numerous interfaces for communication and control, offering maximum flexibility for a variety of applications.</p> <p> The NUCLEO-L476RG is programmed via a micro-USB port, OTG compatible, allowing not only power supply but also the connection of external USB peripherals such as keyboards or storage devices. </p> <p> The microcontroller pins are accessible via female connectors compatible with Arduino Uno and male ST Morpho connectors, facilitating integration with various components and accessories.</p> <p> <a href="https://fr.vittascience.com/l476/"> You can program the NUCLEO-L476RG directly on the dedicated Vittascience interface.</a> </p> <p> <b> Technical Specifications: <p> </b> <ul> <li> Power supply: <br> 5 VDC via micro-USB connector (cable not included) <br> 3.3 to 5 VDC via Vin pin <li> Microcontroller: STM32L476RG (ARM Cortex-M4) <li> Frequency: 80 MHz <li> Memory: <br> SRAM: 128 KB <br> Flash: 1 MB <li> Interfaces: <br> 51 x digital <br> 3 x 12-bit analog inputs <br> 1 x 12-bit analog output <br> Interrupt pins <br> SPI, I2C, USART, UART, CAN <br> USB OTG compatible <li> Push buttons: <br> 1 user button <br> 1 reset button <li> User LED: Connected to pin 13 <li> Dimensions: 82 x 70 x 18.6 mm </ul> >

<L476RG>

<<p> NUCLEO-WB55RG: the powerful and low-power wireless development board for your Bluetooth® Low Energy projects. </p> <p> <b> Features: </b> </p> <p> The NUCLEO-WB55RG from <a href="https://www.st.com/content/st_com/en.html">STMicroelectronics</a> is an advanced development platform that integrates a Dual-core 32‑bit Arm Cortex-M4 and M0+ STM32 microcontroller, offering exceptional power for your wireless projects.</p> <p> With its integrated antenna and Bluetooth 5.2 compatibility, this board is ideal for applications requiring low-power Bluetooth® Low Energy (BLE) connectivity.</p> <p> The NUCLEO-WB55RG also complies with IEEE 802.15.4-2011 standards, allowing for quick evaluation of STM32WB55xx and STM32WB35xx devices.</p> <p> With ARDUINO® Uno V3 connectivity support and ST Morpho headers, this board easily expands its capabilities through a wide range of specialized shields.</p> <p> Whether you are an experienced developer or a beginner, the NUCLEO-WB55RG offers maximum flexibility for your prototyping projects.</p> <p> <a href="https://fr.vittascience.com/wb55/"> You can program the NUCLEO-WB55RG directly on the dedicated Vittascience interface. </a></p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Processor: Dual-core 32‑bit Arm Cortex-M4 and M0+ <li> Memory: <br> Flash: 1 MB <br> SRAM: 256 KB <li> Connectivity: <br> Bluetooth: 5.2 <br> RF 2.4 GHz: Supports IEEE 802.15.4-2011 PHY and MAC protocols (Zigbee®, Thread®) <li> Connectors: <br> USB-B for power and programming <br> 68 pins (Arduino Uno V3 and ST Morpho compatibility) <br> Integrated antenna on PCB <li> LEDs and buttons: <br> 3 user LEDs <br> 1 reset push-button <br> 3 user push-buttons <li> Power supply: <br> ST-LINK, USB VBUS, or external sources <br> Footprint for CR2032 battery <li> Debugger: ST-LINK/V2-1 integrated with mass storage, virtual COM port, and debug port <li> Software: Free libraries and examples available with STM32CubeWB <li> IDE Compatibility: IAR Embedded Workbench®, MDK-ARM, STM32CubeIDE, Mbed Studio <li> Dimensions: Standard Nucleo </ul> >

<WB55RG>

<<p> ESP32-CAM with connector: the compact solution for your IoT projects with photo and video capture.</p> <p> <b> Features: </b> </p> <p>The ESP32-CAM board is a powerful and compact IoT module, equipped with an OV2640 camera, perfect for creating connected projects requiring photo or video capture.</p> <p> Thanks to the integrated ESP32, this board offers WiFi connectivity that allows streaming the camera's video feed over a local network or the Internet.</p> <p> Programmable via the Arduino IDE.</p> <p> <a href="https://fr.vittascience.com/esp32/?module=ESP32-CAM"> You can program the ESP32-CAM directly on the dedicated Vittascience interface. </a> </p> <p> Uses: WiFi surveillance camera, camera for robots, QR Code reader, facial recognition, etc.</p> <p> <b> Technical specifications: </b> </p> <ul> <li> Power supply: 3.3 or 5 VDC <li> Consumption: 2000 mA max <li> Microcontroller: 240 MHz ESP32 <li> Memory: <br> RAM: 520 KB <br> PSRAM: 4 MB <li> Sensor compatibility: OV2640 (integrated) and OV7670 <li> Wireless interfaces: <br> Bluetooth: 4.2, EDR, and BLE <br> WiFi: 802.11b/g/n/e/i (compatible with WPA, WPA2, WPA2-Enterprise, and WPS) <li> Supported video formats: JPEG (OV2640) <li> Micro-SD card reader: up to 4 GB (card not included) <li> Pins used by the micro-SD reader: 2, 4, 12, 13, 14, 15 <li> GPIO connectors: UART, SPI, I2C <li> Outputs: 3.3 VDC <li> Serial rate: 115200 bps <li> Reset button <li> Operating temperature: -20 to 85 °C <li> Dimensions: 27 x 40 x 4.5 mm <li> Weight: 10 g </ul> <p> <b> Notes: </b> </p> <p> When uploading the program, the IO pin must be grounded. This module can be programmed with the ESP32-CAM-NB adapter (not included, requires a USB Type-C cable) or via a USB-serial converter (GT1125 recommended with F/F BBJ15 cable). </p> <p> A 5 VDC/2 A power supply is recommended for optimal use (see MV530N). </p>>

<ESP32CAM>

<<p>Calliope Mini: Learn programming with this German educational board packed with features.</p> <p> <b> Features: </p> </b> <p>Discover the Calliope Mini, a German educational board specifically designed to introduce young learners to programming.</p> <p> Based on an ARM Cortex M0 microcontroller, it is equipped with a variety of sensors and interfaces that enable a wide range of interactive projects.</p> <p> The Calliope Mini can be easily powered via a micro-USB port, a JST connector, or the 3V and GND pins, making it ideal for use in the classroom or at home.</p> <p>Whether learning to program LEDs, using motion sensors, or controlling external devices, this board is a fun and versatile tool for young developers.</p> <p> <b> Technical Specifications: </p> </b> <ul> <li> Microcontroller: ARM Cortex M0 <li> Power supply: via micro-USB, JST connector, or 3V and GND pins <li> Integrated components: <br> 5x5 red LED matrix <br> 2 push buttons <br> Accelerometer, gyroscope, magnetometer (Bosch BMX055) <br> MEMS microphone <br> Programmable RGB LED (WS2812B) <br> 4 banana/crocodile clip connectors <br> 4 analog inputs <br> 8-11 input/output ports (depending on software configuration) <br> Banana/crocodile clip connector for 3.3V (output) <br> 2 Grove connectors (I2C + serial/analog) <li> Clock speed: 16 MHz <li> RAM: 16 kB <li> Included: Batteries, battery holder, and USB cable <li> Manufacturer: Calliope </ul> >

<0742832906043>

<<p>Discover the unique sensation of seeing an object you designed from scratch fly by living the Vittascience Solar Balloon experience.</p><p>The kit contains :</p><ul><li> 1 electronic weather kit</li><li> Micro:bit card, sensors, SD card and connectic necessary for the assembly</li><li> Black polyethylene 30 m x 1 m</li><li> 2 handles with 50m of rope</li><li> 1 pair of scissors</li><li> 2 rolls of adhesive tape</li><li> 1 spindle pattern</li><li> User's guide</li></ul><p>It is thus possible to carry up to 1 kg of load.</p><p>From a legislative point of view, the Balloon can't cross the 50m height, that's why it is delivered with two 50m ropes.</p><p>Incremented and tested throughout the world, the connected solar balloon experience has convinced more than 200 teachers to date. This activity aims to introduce students to programming via Micro:Bit technology while raising their awareness of sustainable development issues.</p><p>During the experiment, the role of your student researchers will be to build the gondola and the solar envelope of the balloon, then to program the various sensors: (CO2, temperature, altitude, pressure ...). Back on earth, you will be able to analyze the data collected during the flight.</p><p>Manufacturer : Vittascience</p><p>Reference : 3760327670023</p>>

<3760327670023>

<<p>This kit includes all the elements to be associated with the use of the solar balloon but can also be used alone for the reading of parameters of the atmosphere: temperature, humidity, pressure but also measurements of volatile organic compounds and CO2 content.</p><p>In the box, you will find:</p><p>a user guide,</p><p>an electronic weather kit consisting of a microcontroller (micro:bit), altitude, air quality, temperature and pressure sensors, LCD screen, microSD card and connectors required for assembly.<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br></p>>

<3760327670047>

<<p>The air quality kit includes all the elements to carry out many measurements concerning the quality of the air.</p><p>These measurements can be compared with those of your Association Agréée de Surveillance de la Qualité de l'Air!</p><p>You will be able to measure the temperature and the humidity of the air but also the volatile organic compounds and the content of CO, CH4 and NO2.</p><p>You can also quantify the fine particles in suspension of sizes PM 10, 2.5 and 1.</p><p>Contents of the kit:</p><ul><li> 1 user's guide,</li><li> 1 electronic kit consisting of a microcontroller (micro:bit)</li><li> 1 Grove shield</li><li> 1 HM3301 sensor: fine particles (PM10, 2.5 and 1)</li><li> 1 MICS6814 sensor: gases (NO2, CH4, CO),</li><li> 1 DHT11 sensor: humidity and temperature,</li><li> 1 Grove monochrome LCD screen</li><li> 1 microSD card</li><li> 1 OpenLog microSD reader</li><li> 1 microSD-USB adapter</li><li> 1 USB cable 1m</li></ul><p>The resources of this kit are realized in partnership with the National Center for Space Studies (CNES).</p><p>Manufacturer: Vittascience</p><p>Reference : 3760327670061</p>>

<3760327670061>

<<p>Discover the power of the sun with the Connected Solar Oven!</p><p>Reach temperatures up to 150°C with this oven to be assembled in kit. The oven is made of French poplar wood from eco-managed forests, itself laser-cut in France.</p><p>The kit contains a programmable station that measures the temperature inside and outside the oven, as well as visible light, ultraviolet and infrared.</p><p>The station comes with a measuring station based on a micro:bit card.</p><p>The kit includes:</p><ul><li> laser-cut poplar wood panels</li><li> Reflector sheet to cut</li><li> polycarbonate glass</li><li> self-adhesive reflective film for the interior of the oven</li><li> self-adhesive gasket, scissors, tape</li><li> electronic kit composed of a micro:bit card, SI1145 and high temperature sensors with Grove connectic, a grove shield, an LCD screen, an openlog module for data recording on the micro-SD card provided</li><li> assembly booklet</li></ul><p>Manufacturer : Vittascience</p><p>Reference : 3760327670092</p>>

<3760327670092>

<<p>3, 2, 1, Go!</p><p>Launch your students into a futuristic race with this kit.</p><p>The LED race kit consists of the following items for the 30 LED version.</p><ul><li> 3 micro:bit boards</li><li> 1 Grove shield</li><li> 1 strip 30 leds neopixel 1m</li><li> 2 Grove push buttons</li><li> 1 USB power socket</li><li> 1 USB cable length 1M</li><li> 1 booklet "The User Guide - LED Race" printed and bound</li><li> downloadable digital resources</li></ul><p>Manufacturer: Vittascience</p><p>Reference: 3760327670108</p>>

<3760327670108>

<<p>3, 2, 1, Go!</p><p>Launch your students into a futuristic race with this kit.</p><p>The LED race kit consists of the following items for the 150 LED version.</p><ul><li> 3 micro:bit boards</li><li> 1 Grove or Bitmaker shield</li><li> 1 strip 150 leds neopixel 5m</li><li> 2 Grove push buttons</li><li> 1 USB power socket</li><li> 1 USB cable 1M</li><li> 1 booklet " The User Guide - LED Race " printed and bound</li><li> Downloadable digital resources</li></ul><p>Manufacturer: Vittascience</p><p>Reference: 3760327670115</p>>

<3760327670115>

<<p>Make your plant grow with this connected plant kit!</p><p>The connected plant kit includes the elements to realize the monitoring of the soil moisture and the luminosity and the control of the automatic watering of a plant.</p><p>Contents of the kit:</p><ul><li> 1 user guide</li><li> 1 electronic kit consisting of a microcontroller (micro:bit)</li><li> 1 Grove shield</li><li> 1 light sensor</li><li> 1 soil moisture sensor</li><li> 1 Grove monochrome LCD screen</li><li> automatic watering kit composed of a Mosfet module, a water pump and a 6V power supply</li><li> USB cable 1m</li></ul><p>Manufacturer: Vittascience Vittascience</p><p>Reference : 3760327670245</p>>

<3760327670245>

<<p>Go exploring on Mars with your robot!</p><p>This kit includes all the elements to discover and learn programming around a robot.</p><p>Carry out several missions with the help of the detailed booklet.</p><p>Contents of the kit:</p><ul><li> 1 activity booklet</li><li> 1 Maqueen robot</li><li> 1 micro:bit card</li><li> 1 infrared remote control</li><li> 1 robot extension: gripper and servomotor</li><li> 1 track for robot line follower</li></ul><p>Manufacturer: Vittascience</p><p>Reference: 3760327670252</p>>

<3760327670252>

<<p>Get started in artificial intelligence with this AI kit for micro:bit!</p><p>Artificial Intelligence discovery kit around the micro:bit card.</p><p>Several activities are proposed in the booklet provided.</p><p>Composition of the kit:</p><ul><li> 1 activity booklet</li><li> 1 micro:bit card</li><li> 1 HUE HD camera</li><li> 1 usb cable 1m</li></ul><p>Manufacturer: Vittascience</p><p>Reference : 3760327670313</p>>

<3760327670313>

<<p>The CO2 aeration alert kit allows you to monitor the concentration of CO2 in the air in order to alert you in case of necessary aeration.</p><p>CO2 measurement kit including :</p><ul><li> 1 micro:bit card</li><li> 1 Grove shield</li><li> 1 Neopixel RGB led</li><li> 1 LCD screen</li><li> 1 I2C multi-socket</li><li> 1 SCD30 Sensirion sensor</li><li> 1 bluetooth module BLE HM10</li><li> 1 power supply</li><li> batteries</li><li> USB cable</li><li> 1 booklet of accompaniment</li></ul><p>Manufacturer : Vittascience</p><p>Reference : 3760327670184</p>>

<3760327670184>

<<p><p>Discover the unique experience of watching an object you've designed from scratch take flight with the Vittascience Solar Balloon experience.</p> <p>The kit includes:</p> <ul> <li>Arduino board</li> <li>Grove Monochrome LCD Screen</li> <li>SGP30 sensor (CO2 and VOCs), BMP280 sensor (pressure, temperature, altitude)</li> <li>OpenLog microSD reader, MicroSD-USB adapter, microSD card, 30 cm USB cable for Arduino</li> <li>9V battery and 9V battery connector</li> <li>Black polyethylene 30 m x 1 m</li> <li>2 handles, 50m of rope, and 1 pair of scissors</li> <li>2 rolls of adhesive tape</li> <li>Kraft template</li> <li>User guide</li> </ul> <p>The balloon can carry up to 1 kg of payload.</p> <p>From a regulatory perspective, the balloon cannot exceed a height of 50 meters; it comes with two 50-meter ropes for this reason.</p> <p>Installed and tested worldwide, the connected solar balloon experience has already won over 200 teachers. This activity aims to introduce students to programming through Arduino Uno technology while raising awareness of sustainable development issues.</p> <p>During the experience, your student researchers will build the balloon's gondola and solar envelope, then program the various sensors (CO2, temperature, altitude, pressure, etc.). Once back on the ground, they can analyze the data collected during the flight.</p> <p>Manufacturer: Vittascience</p> <p>Reference: 3760327670016</p></p>>

<3760327670016>

<<p>This kit includes all the elements to be associated with the use of the solar balloon but can also be used alone for the reading of parameters of the atmosphere: temperature, humidity, pressure but also measurements of volatile organic compounds and CO2 content.</p><p>In the box, you will find:</p><p>a user guide,</p><p>an electronic weather kit consisting of a microcontroller (Arduino), altitude, air quality, temperature and pressure sensors, LCD screen, microSD card and connectors required for assembly.<br><br><hr>This product is compatible with the following card(s) : <br> - Arduino Uno and Nano<br></p>>

<3760327670030>

<<p>The air quality kit includes all the elements to carry out numerous measurements concerning the air quality! These measurements can be compared with those of your Association Agréée de Surveillance de la Qualité de l'Air.</p><p>You will be able to measure the temperature and the humidity of the air but also the volatile organic compounds and the content of CO, CH4 and NO2. You can also quantify the fine particles in suspension of sizes PM 10, 2.5 and 1.</p><p>Contents of the kit :</p><ul><li> 1 user's guide</li><li> 1 electronic kit consisting of a microcontroller (Arduino)</li><li> 1 Grove shield</li><li> 1 HM3301 sensor: fine particles (PM10, 2.5 and 1)</li><li> 1 MICS6814 sensor: gases (NO2, CH4, CO)</li><li> 1 DHT11 sensor: humidity and temperature</li><li> 1 Grove monochrome LCD screen</li><li> 1 microSD card</li><li> 1 OpenLog microSD reader</li><li> 1 microSD-USB adapter</li><li> 1 USB cable 30cm</li></ul><p>The resources of this kit are realized in partnership with the National Center for Space Studies (CNES).</p><p>Manufacturer: Vittascience</p><p>Reference : 3760327670054</p>>

<3760327670054>

<<p>Discover the power of the sun with the Connected Solar Oven!</p><p>Reach temperatures up to 150°C with this oven to be assembled in kit. The oven is made of French poplar wood from eco-managed forests, itself laser-cut in France.</p><p>The kit contains a programmable station that measures the temperature inside and outside the oven, as well as visible light, ultraviolet and infrared.</p><p>The station comes with a measuring station based on an Arduino Uno board.</p><p>The kit includes:</p><ul><li> laser-cut poplar wood panels</li><li> Reflector sheet to cut</li><li> polycarbonate glass</li><li> self-adhesive reflective film for the inside of the oven</li><li> self-adhesive gasket, scissors, tape</li><li> electronic kit consisting of an Arduino board, a USB cable, a 9V battery adapter, a battery, SI1145 and high temperature sensors with Grove connectors, a Grove shield, an LCD screen, an openlog module for recording data on the micro-SD card provided</li><li> assembly booklet</li></ul><p>Manufacturer : Vittascience</p><p>Reference : 3760327670085</p>>

<3760327670085>

<<p>Make your plant grow with this connected plant kit!</p><p>The connected plant kit includes the elements to realize the monitoring of the soil moisture and the luminosity and the control of the automatic watering of a plant.</p><p>Contents of the kit:</p><ul><li> 1 user guide</li><li> 1 electronic kit consisting of a microcontroller (Arduino Uno)</li><li> 1 Grove shield</li><li> 1 light sensor</li><li> 1 soil moisture sensor</li><li> 1 Grove monochrome LCD screen</li><li> 1 automatic watering set consisting of a Mosfet module, a water pump and a 6V power supply</li><li> 1 USB cable</li></ul><p>Manufacturer: Vittascience Vittascience</p><p>Reference : 3760327670238</p>>

<3760327670238>

<<p>The CO2 aeration alert kit allows you to monitor the concentration of CO2 in the air in order to alert you in case of necessary aeration.</p><p>CO2 measurement kit including :</p><ul><li> 1 Arduino Uno board</li><li> 1 Grove shield</li><li> 1 RGB Neopixel led</li><li> 1 LCD screen</li><li> 1 SCD30 Sensirion sensor</li><li> 1 bluetooth module BLE HM10</li><li> 1 9V battery</li><li> battery connector</li><li> USB cable</li><li> an accompanying booklet</li></ul><p>Manufacturer : Vittascience</p><p>Reference : 3760327670177</p>>

<3760327670177>

<<p><b> Artificial Intelligence (AI) will soon have no secrets for you! </b></p> <p> Train your own AI model with ease using images.</p> <p> Then use your embedded AI model on the <a href="https://fr.vittascience.com/shop/546/carte-wio-lite-ai-">Wio Lite AI board</a> and various robots like the one from the <a href="https://fr.vittascience.com/shop/275/robot-martien---version-nucleo-wb55rg">Martian Robot kit.</a> </p> <p> <b> Contents </b> </p> <ul> <li> Wio Lite AI board <li> OV2640 Camera <li> LCD screen with driver and connection module <li> Case with 3D printed parts (1x support + 1x robot mount) <li> 1m USB-C cable <li> Grove-Dupont cable for I2C output <li> Activity booklet </ul>>

<3760327670481>

<<p>Learn the basics of programming with this discovery kit. Step by step,</p><p>program the modules with the Vittascience interface: LCD screen, servomotor,</p><p>etc Simplified programming by blocks or by code in Python, the choice is yours! <br></p><p>Content: <br></p><ul><li>ST NUCLEO-L476RG board equipped with an STM32 <br>microcontroller</li><li>Shield Grove <br></li><li>LCD screen <br></li><li>Neopixel RGB LED <br></li><li>Grove Angular Servo Motor <br></li><li>Buzzer module <br></li><li>Soil Moisture Sensor<br></li><li>Ultrasonic distance sensor<br></li><li>Temperature sensor <br></li><li>Brightness sensor<br></li><li>17 educational activities with example programs to be found <a href='https://en.vittascience.com/ST-starterkit'>here</a> <br></li></ul><p><br></p><p><br></p><p>Manufacturer: Vittascience <br></p><p>Reference: 3760327670375 <br></p>>

<3760327670375>

<<p>Make your own measurement station by programming the different sensors</p><p>of the kit and share data on the LoRa®* network with simplified programming by blocks or in Python code. <br></p> <a href="https://fr.vittascience.com/vittamap/experimentDetails?id=200">Test experiment carried out by Vittascience to present the LoRa module and the 'Connected Measuring Station' kit.</a> Discover real-time data on air temperature, quality and humidity. <a href="https://fr.vittascience.com/shop/312/module-lora-e5---grove">Link to the LoRa E5 module.</a> <p><br></p><p>Content: <br></p><ul><li>ST NUCLEO-L476RG board equipped with an STM32 <br>microcontroller</li><li>Shield X-NUCLEO-IKS01A3 (temperature sensor, pressure sensor, gyrometer, accelerometer...) <br></li><li>Nucleo shield for L476RG <br></li><li>Grove LoRa-E5 module with STM32WLE5JC microcontroller <br></li><li>ST VL53L0X distance sensor <br></li><li>Grove 8x8 RGB Matrix <br></li></ul><p><br> 14 educational activities with example programs to be found <a href='https://en.vittascience.com/ST-iotsensorskit'>here</a>: <br></p><ul><li>Optional LoRa®* network subscription <br></li></ul><p><br></p><p><br></p><p>Manufacturer: Vittascience <br></p><p>Reference: 3760327670399 <br></p>>

<3760327670399>

<<p>Make your plant grow with this connected plant kit!</p><p>The connected plant kit includes the elements to perform soil moisture and light monitoring and automatic watering control of a plant.</p><p>Contents of the kit:</p><ul><li> 1 user guide</li><li> 1 electronic kit consisting of a ST NUCLEO-WB55RG board</li><li> 1 Grove shield</li><li> 1 light sensor</li><li> 1 soil moisture sensor</li><li> 1 Grove monochrome LCD screen</li><li> automatic watering set composed of a Mosfet module, a water pump and a 6V power supply</li><li> 1 USB cable 1m</li></ul><p>Manufacturer: Vittascience</p><p>Reference : 3760327670269</p>>

<3760327670269>

<<p>Go exploring on Mars with your robot!</p><p>This kit includes all the elements to discover and learn programming around a robot.</p><p>Carry out several missions with the help of the detailed booklet.</p><p>Contents of the kit:</p><ul><li> 1 activity booklet</li><li> 1 ST Nucleo-WB55RG board</li><li> 1 Alphabot 2 chassis</li><li> 1 Grove shield</li><li> 1 ST VL53L0X distance sensor</li><li> 1 track for line-following robot</li><li> 2 batteries Li-Ion 14500</li></ul><p>Manufacturer : Vittascience</p><p>Reference: 3760327670276</p>>

<3760327670276>

<<p>Measure and optimize indoor air quality with this complete kit.</p><p>Assemble your alert box including:</p><ul><li> 1 ST NUCLEO-WL55 board equipped with a STM32 microcontroller with LoRa</li><li> 1 Grove shield</li><li> 1 Neopixel RGB led</li><li> 1 LCD screen</li><li> 1 SCD30 Sensirion sensor (CO2 - temperature - humidity)</li><li> 1 USB cable</li><li> 1 power adapter 220V to USB</li><li> 1 accompanying booklet</li><li> 1 year subscription to LoRa network Orange LiveObjects included</li></ul><p>Manufacturer : Vittascience</p><p>Reference : 3760327670344</p>>

<3760327670344>

<<p>Discover programming using this kit created in collaboration with Kubii, official distributor of Raspberry Pi products in France. <br></p><p><br></p><p>Step by step, using the booklet provided in the box, program the modules with the Vittascience interface: LCD screen, servomotor, etc. through simplified block programming.</p><p>Contents: <br></p><ul><li>Raspberry Pi Pico WH board<br></li><li>Shield Grove< br></li><li>LCD screen<br></li><li>LED module<br></li><li>Servomotor<br></li><li>Buzzer<br></ li><li>Light sensor<br></li><li>Air temperature and humidity sensor<br></li><li>Soil humidity sensor<br></ li><li>Ultrasonic distance sensor<br></li><li>USB cable<br></li><li>Activity booklet (in French) including 15 educational activities with example programs. <br></li></ul><p><br></p><p>Manufacturer: Kubii x Vittascience<br></p><p>Reference: 3760327670474<br></p>>

<3760327670474>

<<p>The air quality kit includes all the elements to carry out numerous measurements concerning air quality. These measurements can be compared to those of your Approved Air Quality Monitoring Association! <br></p><p><br></p><p>You will be able to measure the temperature and the humidity of the air but also the volatile organic compounds and the content of CO, CH4 and NO2. You will also be able to quantify fine suspended particles of sizes PM 10, 2.5 and 1. <br></p><p><br></p><p>Content:<br></p><ul><li>a user guide,<br></li><li>a microcontroller (M5Stack Core 1) with screen and integrated battery<br></li><li>a GPS module for M5stack<br></li><li>HM3301 sensor: fine particles (PM10, 2.5 and 1)<br></li><li>MICS6814 sensor: gas (NO2, CH4, CO)<br></li><li>SHT31 sensor: humidity and temperature<br></li><li>an I2C power strip <br></li><li>a microSD card<br></li><li>microSD-USB adapter<br></li><li>3D file to download for the construction of a box<br></li></ul><p><br></p><p>The resources of this kit are produced in partnership with the Sorbonne University and the AirLiquide Foundation <br></p><p><br></p><p>Manufacturer: Vittascience<br></p><p>Reference: 3760327670429<br></p>>

<3760327670429>

<<p>Learn the basics of Micropython programming with this discovery kit. Step by step, program the modules with the Vittascience interface: LCD screen, servo motor, etc. Simplified programming by blocks or by code in Python, the choice is yours!</p><p><br></p><p>Content :</p><ul><li>Thingz Galaxia board equipped with an ESP32 microcontroller<br></li><li>Grove Angular Servo<br></li><li>Buzzer module<br></li><li>2 x 5V LEDs<br></li><li>6 crocodile clips<br></li><li>Ultrasonic sensor<br></li><li>Opto current sensor for Linky meter<br></li><li>1m USB cable<br></li></ul><p><br></p><p><br></p><p>Manufacturer: Vittascience<br></p><p>Reference: 3760327670436<br></p>>

<3760327670436>

<<p> Discover the Maqueen Robot for <a href="https://fr.vittascience.com/shop/187/carte-micro-bit-v2">micro:bit</a>, a fun and educational solution perfect for introducing children to programming while having fun.</p> <p> <b> Features: </b> </p> <p> The Maqueen Robot, designed for micro:bit V1 and V2 boards, is an excellent tool for learning programming, especially suited for STEAM educational environments.</p> <p> Compact, easy to program, and equipped with plug-and-play features, this robot allows children to explore the basics of graphical programming in an enjoyable and interactive way. With its integration with the micro:bit board (not included), young programmers can create and experiment with exciting projects while developing their logical thinking and interest in science.</p> <p> This robot is also equipped with multiple sensors and actuators, enabling a wide variety of educational projects.</p> <p> <a href="https://fr.vittascience.com/microbit/?robot=Maqueen"> You can program the Maqueen Robot directly on the dedicated Vittascience interface. </a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Dimensions: 81 x 85 x 44 mm <li> Weight: 76 g <li> Power Supply: 3 AAA batteries or 3.6 V Lithium battery (not included) <li> Equipment: <br> 1 motorized chassis <br> 2 wheels <br> 1 distance sensor <br> 2 line-following sensors <br> 1 IR sensor <br> 1 buzzer <br> 4 RGB LEDs and 2 red LEDs <br> Connectivity for 2 servomotors <br> 1 battery holder <li> Compatibility: micro:bit board (not included) <li> Programming: Compatible with MakeCode and Mind+ (supports Python and Arduino) </ul> <p> Manufacturer: DFRobot </p> <p> The Maqueen Robot is the ideal solution for a fast and fun introduction to programming, accessible to all children.</p> >

<ROB0148>

<<p> Enhance your Maqueen robot's capabilities with this sturdy aluminum fork, easy to install and compatible with <a href="https://fr.vittascience.com/shop/97/robot-maqueen-pour-carte-micro-bit">Maqueen</a> and Maqueen Plus versions.</p> <p> <b> Features: </b> </p> <p> Transform your Maqueen robot by adding an extra functionality with this aluminum alloy fork.</p> <p> Designed to be mounted directly onto the robot’s chassis using the provided screws and spacers, this fork is operated by an included 9 g servo motor, offering precise control of the grip.</p> <p> It is ideal for object manipulation, sorting, or interactive projects in educational and playful environments.</p> <p> This module is compatible with versions 4.0 and above of the Maqueen robots, as well as with the Maqueen Plus and <a href="https://fr.vittascience.com/shop/97/robot-maqueen-pour-carte-micro-bit">Maqueen Plus V2</a> models.</p> <p> The servo motor connects directly to the S1 or S2 pins of the Maqueen or to the S1, S2, or S3 pins of the Maqueen Plus, making integration and programming straightforward.</p> <p> <b> Technical Specifications:</b> </p> <ul> <li> Material: Aluminum alloy <li> Servo motor weight: 12 g <li> Servo motor range: 0 to 180° <li> Compatibility: <br> Maqueen: Version 4.0 or higher, S1 or S2 pins <br> Maqueen Plus: S1, S2, or S3 pins <li> Idle power consumption: < 45 mA <li> Mounting: Includes screws and spacers for easy installation </ul> <p> Add this fork to your Maqueen robot to expand its possibilities and explore new robotic projects.</p> >

<ROB0156F>

<<p>Enhance your Maqueen robot's capabilities with this aluminum gripper, easy to install and fully compatible with both Maqueen and Maqueen Plus versions.</p> <p><b>Features:</b></p> <p>Transform your <a href="https://fr.vittascience.com/shop/97/robot-maqueen-pour-carte-micro-bit">Maqueen robot</a> by adding an aluminum alloy gripper, ideal for object manipulation projects and interactions in educational settings.</p> <p>This module comes as a kit, including all necessary components, with a 9g servo motor for precise control.</p> <p>The gripper easily attaches to the robot's chassis using the provided screws and spacers, and connects effortlessly to the S1 or S2 pins of the Maqueen control board, or to the S1, S2, or S3 pins of the Maqueen Plus.</p> <p><b>Technical Specifications:</b></p> <ul> <li>Material: Aluminum alloy</li> <li>Servo motor weight: 12g</li> <li>Servo motor range: 0 to 180°</li> <li>Compatibility: <br>Maqueen: Version 4.0 or higher, S1 or S2 pins <br>Maqueen Plus: S1, S2, or S3 pins</li> <li>Idle power consumption: < 45 mA</li> <li>Mounting: Includes screws and spacers for easy installation</li> </ul> >

<ROB0156B>

<<p> Mechanical Shovel for <a href="https://fr.vittascience.com/shop/97/robot-maqueen-pour-carte-micro-bit">Maqueen</a>: Transform your robot into a real construction machine.</p> <p> <b> Features: </b> </p> <p> Add a new dimension to your Maqueen robot with this mechanical shovel, specially designed for loading and moving small objects.</p> <p> Easy to install, this aluminum kit securely attaches to the Maqueen chassis using the included screws and spacers.</p> <p> The provided 9g servo motor allows precise control of the shovel, connecting directly to the S1 or S2 pins on the Maqueen's control board, or S3 for the Maqueen Plus.</p> <p> This extension is compatible with versions 4.0 and above of Maqueen robots, as well as the Maqueen Plus and <a href="https://fr.vittascience.com/shop/556/maqueen-plus-v2">Maqueen Plus V2.</a></p> <p> <b>Technical Specifications: </b> </p> <ul> <li> Range: 0 to 180°</li> <li> Servo motor weight: 12 g</li> <li> Control pins: <br> Maqueen: S1 or S2 <br> Maqueen Plus: S1, S2, or S3</li> <li> Idle power consumption: < 45 mA</li> <li> Material: Aluminum alloy</li> <li> Compatibility: Maqueen robots version 4.0 and above, Maqueen Plus, Maqueen Plus V2</li> <li> Included: <br> Aluminum mechanical shovel <br> 9g servo motor <br> Screws and spacers for assembly</li> >

<ROB0156L>

<<p> Robot Cutebot: The perfect companion for learning programming with micro:bit.</p> <p>Embark on an adventure with a small robot designed for micro:bit.</p> <p> <b> Features:</b> </p> <p> The Cutebot Robot, designed for micro:bit V1 and V2, is the perfect choice for introducing children to programming in a fun and interactive way.</p> <p> Easy to program and ideal for STEAM education, this small robot offers a plug-and-play experience that allows for quick and engaging project creation.</p> <p>With its integrated line sensors, ultrasonic detector, RGB LEDs, and multiple interfaces, the Cutebot can be used for a variety of projects, from line following to obstacle avoidance.</p> <p> The Smart Cutebot chassis from Elecfreaks is specially designed for beginners.</p> <p>Once assembled, it can be programmed to perform various tasks via Microsoft MakeCode, providing a perfect introduction to the world of programming.</p> <p> This robot is also compatible with extensions such as the Joystick:bit or Arcade console for wireless control, requiring a second micro:bit.</p> <p> <a href="https://fr.vittascience.com/microbit/?robot=Cutebot"> You can program the Cutebot robot directly on the dedicated Vittascience interface. </a> </p> <p> <b> Technical Specifications:</b> </p> <ul> <li> Power supply: 3.5 to 5 VDC via 3 AAA batteries (not included)</li> <li> Dimensions: 86 x 85 x 38 mm</li> <li> Weight: 138 g</li> <li> Integrated components: <br> 2 line sensors <br> 1 ultrasonic detector HC-SR04 (2 to 400 cm) <br> 1 IR receiver for remote control (not included) <br> 1 buzzer <br> 2 RGB LEDs compatible with NeoPixel® <br> 2 front RGB LEDs <br> 2 interfaces for servomotors or additional modules (not included) <br> 1 I2C interface for compatible sensors or modules</li> <li> Pinout: <br> IR receiver: P16 <br> RGB LEDs: P15</li> <li> Servo outputs: P1 and P2</li> <li> I2C: P19 and P20</li> <li> Buzzer: P0</li> <li> Gear motor: GA12-N20, 300 rpm</li> </ul> <p> <b> Kit contents:</b> </p> <ul> <li> 1 x Smart Cutebot chassis </li> <li> 1 x holder for 3 AAA batteries </li> <li> 1 x ultrasonic detector HC-SR04 </li> <li> 1 x line-following sensor board </li> <li> 1 x user manual </li> </ul> >

<EF08209>

<<p> Robot Mini Buggy Move: A fun introduction to robotics with micro:bit. </p> <p> <b> Features: </b> </p> <p>The Robot Mini Buggy Move by Kitronik is a fun and educational robotics kit, perfect for introducing young learners to the world of programming and robotics.</p> <p>Designed for micro:bit V1 and V2 boards (not included), this 2-wheeled robot is ideal for autonomous projects, remote control via Bluetooth, or even driving with a second micro:bit using the radio functionality.</p> <p>The Mini Buggy Move is equipped with two continuous rotation servomotors, controlled by an included Servo:Lite board.</p> <p>With its 5 individually addressable RGB LEDs, the robot can display light indicators, brake lights, and much more.</p> <p>With rubber tires for better traction, this buggy is ready to take on all your robotic project challenges.</p> <p> <a href="https://fr.vittascience.com/microbit/?robot=Buggy"> You can program the Buddy robot directly on the dedicated Vittascience interface.</a> </p> <p> <b> Technical Specifications: </b> </p> <ul> <li> Dimensions: 80 x 65 x 70 mm</li> <li> Power supply: 3 AAA batteries (included)</li> <li> Included components: <br> Complete chassis <br> 2 Micro 360-degree continuous rotation servomotors <br> Servo control board <br> 2 ABS wheels with rubber tires <br> 5 NeoPixel® compatible RGB LEDs <br> Necessary screws and bolts </li> <li> Programming: <br>Custom blocks available to simplify programming <br>Control the servomotor speed via PWM signal </li> <p> Manufacturer: Kitronik </p> <p> <b> Kit contents: </b> </p> <ul> <li> 1 x complete chassis</li> <li>2 x servomotors</li> <li>1 x Servo board</li> <li>2 x ABS wheels</li> <li>2 x rubber tires</li> <li>3 x AAA batteries</li> <li>Necessary screws and bolts</li> >

<5652>

<<p>Turn your Move Mini Buggy into a Buldozer with this robot add-on.</p><p>With this Bulldozer add-on for: MOVE mini for the BBC microbit, everyone's favorite little programmable robot buggy just got better.</p><p>The kit contains:</p><ul><li> 1 set of Bulldozer components.</li><li> 1 servo 180°.</li><li> 4 screws M2 6mm.</li><li> 4 M2 nuts.</li><li> 2 screws M3 chamfered.</li></ul><p>Manufacturer: Kitronik</p><p>Reference : MBUGGYBULL</p>>

<MBUGGYBULL>

<<p> AlphaBot2 Robot: Embark on an adventure and program your own robot with Arduino.</p> <p> <b> Features : </b> </p> <p> The AlphaBot2 Robot is a circular robotic chassis designed for Arduino Uno and compatible boards (board not included), providing an ideal base for developing exciting robotic projects.</p> <p> Equipped with multiple sensors and modules, such as an OLED display, RGB LEDs, a buzzer, an IR receiver, an ultrasonic obstacle detector, proximity sensors, and line followers, this robot is capable of navigating autonomously or being controlled remotely.</p> <p> The AlphaBot2-Ar chassis comes as a solder-free kit, including everything you need to easily assemble a functional robot.</p> <p>It can be controlled in several ways: via a smartphone or tablet using a Bluetooth XBee module (not included), with the provided infrared remote control, or autonomously by programming the sensors via the Arduino IDE.</p> <p>This versatile robot is ideal for exploring robotics and programming.</p> <p> <b> Technical Specifications:</b> </p> <ul> <li> Power supply: 2 Li-Ion 14500 batteries, 3.7 V (not included)</li> <li> Compatibility: Arduino Uno or compatible boards</li> <li> N20 Gear Motors: <br> Gear ratio: 1:30 <br> Power supply voltage: 6 VDC <br> Rotation speed: 600 RPM at 6 VDC</li> <li> Integrated components: <br> OLED display <br> RGB LEDs WS2812B <br> Buzzer <br> IR receiver <br> Ultrasonic obstacle detector <br> IR proximity sensors <br> Line followers <br> XBee support (Bluetooth XBee module not included)</li> <li> Wheels: Rubber, Ø42 x 19 mm</li> <li> Dimensions: 110 x 98 x 140 mm</li> </ul> <p> <b> Kit Contents:</b> <ul> <li>AlphaBot2-Ar chassis</li> <li>Infrared remote control</li> <li>USB - microUSB cable</li> </ul>>

<12911>

<<p>Program a robot and go on an adventure with the BitCar robot for micro:bit.</p><p>This robot has an electronic board with :</p><ul><li> 1 buzzer</li><li> 2 line tracking sensors</li><li> 4 addressable leds.</li><li> 2 Grove ports to add an ultrasonic sensor provided.</li></ul><p>Sold in kit to assemble with screws and screwdriver.</p><p>Batteries and micro:bit card not included.</p><p>Manufacturer : Seeed Studio</p><p>Reference : 114991884</p>>

<114991884>

<<p>Automate your tasks with this robotic arm for micro:bit!</p><p>Equip your micro:bit with this robotic arm kit and start exploring the world of robots and articulated arms.</p><p>It includes a 5V regulator, with an output current of up to 3A, which can be powered from the battery via a VIN terminal.</p><p>This kit contains:</p><ul><li> 4 servo motors</li><li> 1 battery box</li><li> 2 joysticks</li><li> mounting key.</li></ul><p>Manufacturer: Kitronik</p><p>Reference : RBRAS</p>>

<RBRAS>

<<p>Retrogaming at your fingertips with the Game Pad!</p><p>The Gamepad for Micro:bit has been designed to bring back all the sensations of retrogaming.</p><p>In addition to protecting your Micro:bit card, this controller is perfect for a new experience of all your games.</p><p>It is composed of :</p><ul><li> 1 joystick</li><li> 4 control buttons</li><li> 4 programmable lights</li><li> 1 buzzer</li><li> Several sensors.</li></ul><p>The Gamepad for Micro:bit is the essential accessory to fully enjoy your games.</p><p>Manufacturer: DFRobot</p><p>Reference : DFR0536</p>>

<DFR0536>

<<p>Retrogaming at your fingertips with the BitPlayer controller.</p><p>This BitPlayer controller for micro:bit card (not included) has :</p><ul><li> 1 joystick 2 axes</li><li> 6 programmable buttons (L and R + A, B, C and D)</li><li> 1 buzzer</li><li> 1 vibrator</li><li> 1 Grove I2C port to add an LCD screen</li><li> Module dimensions: 111 mm x 50 mm x 23 mm</li></ul><p>You can use this controller to program your own game with the micro:bit card or use it as a remote control to drive your robot!</p><p>Requires 2 AA batteries not included</p><p>Manufacturer: Seeed Studio</p><p>Reference : 114991857</p>>

<114991857>

<<p>Aluminum tracked chassis with 2 motors. It is ideal for your robot projects.</p><p>The kit includes:</p><ul><li> aluminum chassis</li><li> 2 tracks</li><li> 4 drive wheels</li><li> support block for 18650 battery (delivered without power supply)</li><li> screws</li></ul><p>Recommended programming by Arduino board and motor control.</p><p>Manufacturer : DFRobot</p><p>Reference : ROB0153</p>>

<ROB0153>

<<p>Smart Cutebot Pro Robot Car Kit is a programming robot for STEAM education, it equips with a 4-way infrared line-following sensor, an encoder motor, the LED rainbow light, an ultrasonic sensor, and other devices. With the encoder motors, the Cutebot Pro provides the flexibility to control the distance the cart travels and enables more precise control of the turning angle. The Cutebot Pro also offers a variety of expansion interfaces to allow for the expansion of additional hardware to stimulate your child's imagination and creativity.</p>>

<EF08292>

<<p>Build a robotic hand with this uHandbit kit!</p><p>Robotic hand programmable via a micro:bit card.</p><p>Equipped with several modules:</p><ul><li> 1 ultrasonic distance sensor</li><li> 1 color sensor</li><li> 2 RGB leds</li><li> 1 sound sensor</li><li> 1 buzzer</li></ul><p>Powered by a 3.7V battery or on the mains (6V, 5A)</p><p>Manufacturer: Hiwonder</p><p>Reference : HIW-UHA</p>>

<HIWUHA>

<<p> OOBYBOT is an eco-designed educational robot, designed to teach programming and STEAM activities, in line with the principles of sustainable development on the French market. </p> <p> <b> Functions : </b> </p> <p> A robot kit in a "Do-It-Yourself" box, innovative and playful </p> <p> <li> Self-build robot with cardboard parts and electronic components. </p> <p> <li> You can add sensors to take programming a step further. </p> <p> <b> Features : </b> </p> <p> It uses all the components of the robot box, including in some cases the packaging cardboard : </p> <p> <li> It is made of ecological and recycled materials (cardboard, 3D printing, laser cutting) : <li> It's equipped with the BBC Micro:Bit electronic board, which lets you learn block, JavaScript and Python programming. <li> <a href="https://fr.vittascience.com/microbit/?mode=mixed&console=bottom&toolbox=vittascience&robot=Oobybot"> You can program it on the Vittascience interface. </a> </p> <p>Made in France Employment of people with disabilities to facilitate their social integration. Produced with the support of the French Ministry of Education. </p> <p>Satisfies technology (primary and junior high school), SNT, NSI and SI (high school) curricula.</p> >

<OOBYBOT>

<<p> The Kitro:bot is a robot based on the micro:bit card and Grove technology. </p> <p> <b> Features : </b> </p> <p> Designed as a student kit, this mini robot can be used both in the classroom and at home. </p> <p> It's the perfect robot to introduce children and teenagers to robotics, programming, logic and algorithms. </p> <p> Designed to be both fun and educational, Kitro:bot V2 is the perfect tool to stimulate the creativity and technical skills of inquisitive young minds. </p> <p> With its two continuously rotating servomotors, Grove ultrasonic sensor, RGB LEDs and buzzer, and the option of two line followers (not included), this robot has everything you need to learn programming. The student workbook is available free of charge from the Technologie Services website.</p> <p> <a href="https://fr.vittascience.com/microbit/?robot=Kitrobot&console=bottom&toolbox=vittascience">You can program it directly on Vittascience.</a> </p> <p> <b> Technical characteristics : </b> </p> <p> <li> <b> Kit to assemble (approx. 10/15 min. assembly time). </b> <li> Dimensions: 89 x 95 x 75 mm. <li> Ultrasonic distance sensor module. <li> Buzzer. <li> LEDs RGB. <li> Two continuously variable servomotors. <li> Additional ports for connecting other Grove modules. <li> Power supply: 3 LR06 (AA) batteries. Requires micro-USB cable and three LR06 batteries (optional). </p>>

<277035>

<<p> The BitBot XL is a programmable robot with a micro:bit card. </p> <p> The Bit:Bot XL platform for micro:bit V1 and V2 cards (card not included) provides an introduction to the world of programming. </p> <p> <b> Features : </b> </p> <p> Code your own line-following robots and race to see which code produces the fastest time ! </p> <p> Thanks to its analog light sensors, your robot can follow a light source such as a torch, or hide in the darkest place it can find. </p> <p> Its buzzer lets you emit beeps or music whenever you like. </p> <p> <a href="https://fr.vittascience.com/microbit/?robot=Bitbot"> You can program the BitBot XL on Vittascience.</a> </p> <p> <b> Technical characteristics : </b> </p> <p> <li> Robot dimensions: 120 x 120 x 44 mm <li> Power supply: 3 AA batteries (not included) <li> 2 geared motors with Ø46 x 10mm wheels <li> 12 Neopixel®-compatible RGB LEDs <li> 2 analog light sensors <li> 2 line tracking sensors with activity LEDs <li> 2 GVS outputs for servomotors (ground, 5 Vdc and signal) <li> 1 on/off switch <li> 1 buzzer connected to P0 <li> Optional pen holder integrated directly into the robot <li> <b> Micro:bit V1 and V2 compatible </b></p> >

<BITBOTXL>

<<p> The CODOK robot, based on a CODO board, enables robotics and programming projects to be prototyped around the BBC micro:bit board and Grove modules such as sensors and actuators. </p> <p> <b> Features : </b> </p> <p> The CODOK robot is set in motion by two geared motors controlled from your micro:bit card. It also incorporates two line followers and a distance sensor for autonomous movement. </p> <p> <a href="https://fr.vittascience.com/microbit/?robot=Codok&console=bottom&toolbox=vittascience"> You can program the CODOK robot on Vittascience. </a> </p> <p> <b> CODOK kit contents : </b> </p> <p> <li> CODO board <li> Front caster <li> IR Carter <li> Motorization <li> Line sensor <li> Distance sensor </p> <p> <b> Technical specifications : </b> </p> <li> Power supply: 4 AA batteries (not included) <li> On/Off switch <li> Power LED <li> Geared motors : <ol> <li> Speed : 200 tr/min <li> Couple : 100 g.cm </ol> <li> Codo card dimensions : 72 x 113 mm <li> Wheel dimensions : Ø 60 x 8 mm <li> <b> Micro:bit V1 and V2 compatible </b> >

<CODOK>

<<p>Aluminum robotic arm driven by 6 separately controllable 20 kg motors.</p><p>Mounting on rotating base plate (360°).</p><p>Supplied with 16 servomotor controller</p><p>for Arduino or compatible card via I2C bus. Internal clock and filter capacitor already included on the card.</p>>

<4250236815374>

<<p>The Maqueen Plus V2 Robot is a versatile and programmable educational robot, ideal for learning robotics and coding for beginners and enthusiasts of all ages.</p><p><b>Features :</b></p><p>The Maqueen Plus V2 Robot is an educational robot designed to introduce users to robotics and programming in a fun and interactive way.</p><p>It offers a variety of features that make it suitable for different learning levels:</p><p><ul></p><p><li>Easy programming: Compatible with several programming languages, including Scratch, MakeCode, and Python, allowing users to progress from block-based programming to textual coding.</p><p><li>Integrated sensors: Equipped with ultrasonic sensors, line-following, and obstacle detection sensors, offering numerous possibilities for experimentation.</p><p><li>Motors and movements: Features two independent motors allowing precise movements and on-the-spot rotations.</p><p><li>Possible extension: Ability to add additional modules to expand the robot's functionalities.</p><p><li>Progressive learning: Ideal for schools, robotics clubs, and home learning, from beginner to intermediate level.</p><p><li><a href="https://fr.vittascience.com/microbit/?robot=MaqueenPlus">You can program the Maqueen Plus V2 on the dedicated interface.</a></p><p></ul></p><p><b>Technical specifications :</b></p><p><ul></p><p><li> Powered by lithium 18650 battery (not included)</p><p><li>Dimensions : 100 x 107 x h 100mm</p><p><li>Processor : <a href="https://fr.vittascience.com/shop/187/carte-micro-bit-v2">BBC micro:bit V2</a> (not included, to be purchased separately)</p><p><li>1 chassis</p><p><li>2 motors and incremental encoders</p><p><li>1 distance sensor</p><p><li>6 line detection sensors</p><p><li>1 self-calibration button</p><p><li>1 IR sensor</p><p><li>1 buzzer for sound effects</p><p><li>2 RGB LEDs</p><p><li>6 blue LEDs</p><p><li>1 15-pin auxiliary connection port for servomotors</p><p><li>1 mini USB connector for direct charging on the robot</p><p><li>1 paper track for line following 50 x 50 cm</p><p><li>Connectivity : Bluetooth via micro:bit V2</p><p><li>Weight : Approximately 150g</p><p></ul></p><p><li> Compatible with <a href="https://fr.vittascience.com/shop/495/module-ai-huskylens-gravity-sen0305">Husky Lens camera</a> (non fournie) </p>>

<maqueenplusv2>

<<p>Take your line-following robots to Mars with this PVC track.</p><ul><li> Material: PVC</li><li> Dimension of the track: 1.24 m x 2.04 m</li></ul><p>Manufacturer: Vittascience</p><p>Reference: 3760327670320</p>>

<3760327670320>

<<p>Take your line-following robots to Mars with this paper track.</p><ul><li> Material: paper</li><li> Dimension of the track: 1,02 m x 0,62 m</li></ul><p>Manufacturer: Vittascience</p><p>Reference: 3760327670306</p>>

<3760327670306>

<<p>Go on an adventure, with your head in the air with this Tello Drone!</p><p>Drone Tello (DJI-Ryze) programmable with Vittascience interfaces.</p><p>Controllable via Wi-Fi from the smartphone, or from the computer.</p><ul><li> Video resolution: HD 720p</li><li> Effective fixed resolution: 5 MP</li><li> Battery: Lithium-polymer</li><li> Dimensions of the drone: 198 mm x 48 mm x 230 mm</li><li> Weight: 140 g</li></ul><p>Comes with spare propeller and battery</p><p>Manufacturer: DJI</p><p>Reference : Tello</p>>

<Tello>

<<p>Go on an adventure with a small robot dedicated to the Raspberry Pi Pico board<br></p><p><br></p><ul><li>This little robot for Raspberry Pi Pico board is the perfect robot for learning programming.</li><li>Very simple to program, it will be suitable for STEAM teaching.</li><li>Its small size, cool features and plug-and-play capabilities allow children to quickly learn programming in an entertaining way, stimulating their interest in science and logical thinking.</li><li>Equipped with two independently programmable motors, 4 RGB LEDs, a buzzer and a button. <br></li></ul><p>It is also equipped with a line tracking module.</p><p><br></p><p>Attention ! Delivered without Raspberry Pi Pico card<br></p><p>Manufacturer : Kitronik</p>>

<5335>

<<p>Recharge the battery of your Maqueen robot with this holder and charger.</p><ul><li> 16340 battery holder designed for the Micro:Maqueen robot.</li><li> This module also includes a charging circuit via microUSB with indicator LEDs.</li><li> Voltage in charge: 4.5V to 5.5V</li><li> Output voltage: 3.5V to 4.2V</li><li> Protection against reverse polarity and overloading</li><li> Dimensions: 56 mm x 32 mm</li></ul><p>Manufacturer: DFRobot</p><p>Reference : FIT0611</p>>

<FIT0611>

<<p>The CyberPi Go kit consists of the Makeblock CyberPi board and the Pocket shield extension connector. CyberPi is a powerful and versatile microcontroller designed for the world of education.</p><ul><li>CyberPi is a mini-computer dedicated to learning programming, AI, networking and the Internet of Things (IoT).</li></ul><ul><li>The CyberPi board is programmable in Python and can be used to create objects such as mini game consoles, use of sensor data, display of curves, etc.</li></ul><ul><li>Compatible with mBuild sensor/actuator modules and the Pocket Shield extension connector.</li></ul><p>Technical specifications :</p><p>CyberPi : ESP32 processor (240MHz), 5-way joystick, Home button, 2 buttons (A and B), microphone, 3-axis accelerometer, 3-axis gyroscope, 1.44' 128*128 IPS colour screen, speaker, Bluetooth, Wi-Fi.</p><p>Pocket Shield: 800mAh 2.96Wh battery, 5VDC 700mA input, 5VDC 2A output.</p>>

<Cyberpikit>

<<p>mBot Explorer Bluetooth robot, kit, no soldering: assembly time approx. 20 minutes</p><p>Requires a computer or tablet with a Bluetooth connection.</p><p>The mBot robot can detect obstacles, follow a line, emit sounds and light signals, receive commands from a remote control, be controlled by a remote control, communicate via an infrared channel with another robot and interact with Scratch.</p><p>The robot consists of a robust aluminium chassis fitted with two geared motors and a control board.</p><p>Kit contents: screwdriver, screws and bolts, aluminium chassis, wheels, gearmotors, mCore board + protective cover, LED matrix, Bluetooth module, US rangefinder and line detection modules with RJ 25 connector, IR remote control, battery coupler, programming cable, line tracking paper track, assembly instructions (in English).</p><p>Robot programmable on <a href="https://fr.vittascience.com/mBot/">the dedicated Vittascience interface.</a></p>>

<MBP1050015>

<<p>The Winky robot: An educational tool in line with the French national education curriculum (cycles 1 and 2), ideal for introducing children (aged 5-12) to STEM programming. Designed for elementary school, colleges, families and institutions. </p> <p>Created in France in 2017, in collaboration with École Polytechnique, Winky is an educational robot designed to introduce students in cycles 2 and 3 to robotics, programming, and science through fun exercises. It perfectly aligns with the objectives of the French national curriculum, offering an innovative and interactive support for modern education.</p> <p><b>Product Highlights:</b></p> <ul> <li>Aligned with the French national curriculum: Winky supports students in acquiring the skills required for cycles 2 and 3, meeting curriculum expectations.</li> <li>Designed in France in collaboration with École Polytechnique, Winky meets the highest quality standards (FCC) and European norms (CE).</li> <li>Specific educational applications: Stimulates scientific curiosity and introduces the basics of robotics and programming.</li> <li>Easy to use: Designed for teachers and children with comprehensive support (tutorials, interactive applications).</li> </ul> <p><b>Target Audience:</b></p> <ul> <li>Primary schools</li> <li>Educational institutions and youth associations</li> <li>Teachers and specialized educators</li> </ul> <p><b>Kit Contents:</b></p> <ul> <li>1 Winky robot</li> <li>1 micro-USB charging cable</li> <li>1 quick start guide</li> <li>Winky Code app on Google Play and Apple Store via a tablet or smartphone (not included, Android version 9 minimum or iOS version 12 minimum)</li> <li>Vittascience programming interface</li> <li>Technical and educational support</li> </ul> <p><b>Technical Specifications:</b></p> <ul> <li>Dimensions: 15 cm in height x 12 cm in diameter</li> <li>Weight: 1 kg</li> <li>Material: Durable, BPA-free ABS plastic, shock-resistant</li> <li>Color: White with colored parts (purple, blue, yellow, and red)</li> <li>Power supply: Rechargeable battery via micro-USB</li> <li>Battery life: Up to 8 hours of continuous use</li> <li>Charging time: 1.5 hours for a full charge</li> <li>Compatibility: Android and iOS (via the dedicated "Winky Code" app)</li> <li>Interactive LED screen: Expressive display of emotions and animations</li> <li>Connectivity: Bluetooth 4.2 for synchronization with tablet or smartphone</li> </ul> <p><b>Sensors:</b></p> <ul> <li>Motion sensor (accelerometer)</li> <li>Infrared proximity sensor</li> <li>Touch sensor on the head</li> <li>Light sensor for interaction detection</li> </ul> <p><b>Winky Robot Product Description:</b></p> <p>The Winky robot is an innovative educational tool designed for primary schools. It perfectly aligns with the objectives of the French national curriculum, offering a fun and interactive support for learning the basics of robotics and programming, developing logic, and stimulating student creativity. Suitable for children aged 6 and up, Winky introduces key concepts such as problem-solving, scientific exploration, and understanding technological mechanisms. It allows teachers to diversify educational activities through its tailored educational applications designed to meet curriculum requirements.</p> <p>- For more information: <a href="https://www.heywinky.com/fr">www.heywinky.com/fr</a><br> - Contact us: amanda.ferreira@mainbot.me - +336 25 25 93 18<br> - Customer service: <a href="https://winkyrobot.zendesk.com/hc/fr">Customer Service</a></p> <p><b>Winky Code Application:</b></p> <p>Winky and its application "Winky Code" help children develop their programming and robotics skills. They learn to code by completing various challenges and can then play without a tablet. Winky’s sensors and effectors allow it to interact with children and their environment.</p> <p>The numerous included challenges offer children practical applications and diverse games. The originality and variety of the activities keep them eager to keep progressing with Winky. Each challenge includes 3 levels divided into 10 to 15 steps.</p> <p><b>Vittascience Programming Platform:</b></p> <p>Designed in collaboration with Vittascience, the Winky blockly programming platform for teachers and students allows access to Winky in virtual format. Interfaces are provided to easily program all of Winky's sensors and effectors, see the result immediately on a 3D simulator, and then execute the program on the robot itself. Students can practice on the simulator before testing the programming on the robot, facilitating teacher supervision and reducing the number of robots needed per class.</p> <p><b>Price and Sales Conditions:</b></p> <p>Indicative price: Winky robot starting at 139€ (original price 249.90€) (price adjusted based on the quantities and options chosen by educational institutions), Winky Code app included.<br> Academic offer: Preferential rates for public institutions and student group packages.<br> Warranty: 2 years (parts and labor).</p> <p><b>Teaching Advantages:</b></p> <ul> <li>Aligned with the national curriculum: seamlessly integrates into subjects related to science, technology, engineering, and mathematics (STEM).</li> <li>Accessibility: Designed for use from age 6 up to cycle 3, with educational content tailored for each age group.</li> <li>Modularity: Provides a personalized and continuous educational progression throughout school cycles.</li> <li>Durable and robust: Built with resistant materials for daily classroom use.</li> <li>Safety: Made of safe materials, designed to comply with CE safety standards for children.</li> </ul> <p><b>Educational Features:</b></p> <p><b>Programming:</b><br> Children can learn the basics of robotics and programming through a simple interface adapted to cycle 2 and 3 age levels. They create basic algorithms to make Winky move, react to events, or trigger animations through simple, fun exercises.</p> <p><b>Exploration and Learning:</b><br> Winky offers games and activities that encourage language development, creativity, and scientific exploration, directly tied to primary school objectives. The robot guides students in activities related to logic, problem-solving, and introductory technology.</p> <p><b>Winky Applications:</b></p> <ul> <li><b>Winky Code Application:</b> Intuitive interface for programming actions.</li> <li><b>Educational Games:</b> Interactive activities for learning mathematics, reading, and science.</li> <li><b>Additional Application:</b> The "Winky Play" app, included for free as an educational supplement, lets children discover Winky, its sensors, and effectors through fun and engaging games.</li> </ul> <p><b>Customizable:</b> Teachers can adapt Winky's activities according to their students’ needs, with custom scenarios to meet specific educational objectives.</p> >

<WINKYROBOT>

<<p>The mBot2 robot combines a high-quality metal chassis with high coding performance thanks to a CyberPi ESP32 core and its many on-board features. : </p><p>- WiFi and Bluetooth to connect several robots in a network</p><p>- New-generation sensors such as the ultrasonic rangefinder and the 4-colour line detector</p><p>- Encoder motors with metal axes for precise movements</p><p>- Compatibility with all the sensors/actuators in the mBuild range and the ability to connect 10 simultaneously</p><p>To go further in learning programming and robotics, you can code in Python and access advanced functionalities for connected objects, artificial intelligence and machine learning. </p><p>The robot is programmable on <a href="https://fr.vittascience.com/cyberpi/">Cyber Pi interface</a> with the blocks in the "Robots" category. </p><p>Technical specifications:</p><p>- Dimensions: 187.5 x 102.5 x 224mm</p><p>- ROM 448KB (to store up to 8 programs)</p><p>- Colour screen 1, 44" 128x128 pixels</p><p>- No software update required</p><p>- Supports multiple connections</p><p>- Coding possible with micro-python+ and Python3</p><p>- Runs on rechargeable LiPo battery (2500 mAh)</p><p>- Built-in WiFi and Bluetooth module (smartphone not supplied)</p>>

<MBP1010132>

<<p>Discover the line follower programming with this robot track !</p><p>Robust paper track compatible with all robots with line follower module.</p><p>A different front and back side: 2 tracks to choose from for your robot!</p><ul><li> Material: cardboard</li><li> Black line: 15 mm thick on white background</li><li> Dimensions of the track: 103 x 66 cm</li></ul><p>Manufacturer: DFRobot</p><p>Reference : MBT0011</p>>

<MBT0011>

<<p>The Niryo Ned2 is a versatile and precise 6-axis collaborative robotic arm, ideal for education, research, and light industry.</p><p>It is used by teachers and researchers in middle schools, high schools, universities, and engineering schools for multiple teaching topics.</p><p><b>Features:</b></p><p><p>The Niryo Ned2 is a collaborative robot designed to be accessible and efficient.</p><p><p>It can be programmed using various languages such as Python or Blockly, making it suitable for both beginners and experienced users. Its intuitive user interface facilitates quick adoption.</p><p><p>This robotic arm is particularly suited for:</p><p><p><ul></p><p><li>Teaching robotics and automation</p><p><li>Rapid prototyping</p><p><li>Small assembly or pick-and-place tasks</p><p><li>Robotics research</p><p></ul></p><p>Compatible with ROS (Robot Operating System), the Ned2 offers numerous possibilities for experimentation and integration into more complex systems.</p><p><p><a href="https://fr.vittascience.com/niryo/">You can program the Niryo Ned2 on the dedicated Vittascience interface.</a></p><p><p><b>Technical specifications:</b></p><p><ul></p><p><li>Number of axes: 6</p><p><li>Payload: up to 300g</p><p><li>Precision: ±0.5 mm</p><p><li>Maximum speed: 90°/s on the fastest axis</p><p><li>Power supply: 12V DC</p><p><li>Communication: Ethernet, Wi-Fi, USB</p><p><li>Width: 181.60mm</p><p><li>Depth: 187.60mm</p><p><li>Height: 436.22mm</p><p><li>Weight: 7kg</p><p><li>The robotic arm is also equipped with an adaptive gripper, enabling the manipulation of objects with various shapes.</p><p></ul></p>>

<Ned2>

<<p>Go on an adventure with a robot specially designed for learning to code.<br></p><p><br></p><ul><li>The Thymio robot is the perfect product for learning programming, in unplugged mode without a computer or from the online interface. <br></li><li>Very simple to program, it will be suitable for STEAM teaching.</li></ul><p>The Thymio robot is already assembled with 6 pre-programmed behaviors: follow a line, avoid obstacles or follow the hand.<br></p><ul><li>Its small size and interesting features allow children to quickly learn programming in an entertaining way, stimulating their interest in science and logical thinking.<br></li><li>The Thymio robot comes with its getting started guide, a USB cable and a key to connect it to a computer and program it wirelessly. <br></li></ul><p><br></p><p>Manufacturer : Mobsya<br></p><p>Reference: 7640164630021<br></p>>

<7640164630021>

<<p>Specially designed to remotely control the Thymio robot</p>>

<TY40>

<<p>Eliobot is an educational robot developed in France, to assemble yourself with a simple screwdriver. <br></p><p><br></p><p>Includes: <br></p><ul><li>an electronic card which constitutes the body of the robot<br></li><li>a battery<br></li><li>two motors<br></li><li>two wheels<br></li><li>a ball wheel<br></li><li>a USB-C cable for charging and programming<br></li></ul><p><br></p>>

<eliobot>

<<p>Entirely designed and manufactured in France, BUDDY is an “emotional companion” type robot. This adorable companion is able to improve everyone's life, and more particularly, to create social ties, promote children's learning, watch over and take care of our elders.<br></p><p><br></p><p>The Education Multi Applications Pack includes embedded software for programming (under Buddylab, Scratch and Python), mediation and learning for fun and interactive activities for all students from kindergarten to high school and children with special educational needs, but also 3 years of updates, corrective maintenance and 1 year hardware warranty (return to workshop) <br></p><p><br></p><p>Robot delivered with battery charger <br></p>>

<EDUBUDDY>

<<p>Control a robot with your Texas Insturments graphing calculators!</p><p>The TI-Innovator Rover is a programmable robot for Texas Instruments graphing calculators and the TI-Innovator Hub.</p><p>User of the TI-83 Premium CE Python Edition calculator, use the Rover to realize new missions !</p><p>The TI-Innovator Rover is powered by rechargeable battery.</p><p>It has:</p><ul><li> 2 integrated motors</li><li> 1 color sensor</li><li> 1 gyroscope</li><li> 1 marker holder</li><li> 1 motion detector.</li><li> Robot dimensions: 320 mm x 195 mm x 100 mm</li><li> Weight: 960 g</li></ul><p>Manufacturer: Texas Instruments Texas Instruments</p><p>Reference: 03243480105811</p>>

<03243480105811>

<>

<IRT01>

<<p>Easily connect Grove sensors and actuators to a micro:bit board without soldering with the Grove Shield.</p><p>This shield is compatible with V1 and V2 micro:bit boards.</p><ul><li> Grove pin output voltage: 3.3V</li><li> Module dimensions: 73 mm x 74 mm x 10 mm</li><li> Weight: 28 g</li></ul><p>Manufacturer: Seeed Studio</p><p>Reference : 103100063</p>>

<103100063>

<<p>HuskyLens Gravity is an intelligent, low-cost, easy-to-use visual sensor based on an OV2640 camera combined with a 2" IPS display and a Kendryte K210 processor.</p><p>This module enables : object tracking, facial recognition, object recognition, line tracking, color recognition, QR code reading.</p><p>Programmable on the BBC Micro:bit interface, and soon on the Arduino interface.</p><p>Discover a french resource for getting to grips with the module on Micro:bit : https://fr.vittascience.com/learn/tutorial.php?id=991/prise-en-main-de-la-camera-huskylens-sur-l-interface-bbc-micro-bit</p><p>Features :</p><p>Power supply :</p><ul><li>5 Vdc via micro-USB</li><li>3.3 to 5 Vdc via Gravity connector</li></ul><p>Power consumption :</p><ul><li>320 mA at 3.3 Vdc</li><li>230 mA at 5 Vdc</li></ul><p>Camera : OV2640 2 MP</p><p>Display :</p><ul><li>Type: IPS</li><li>Dimensions: 2" wide</li><li>Resolution: 320 x 240 pixels</li></ul><p>Interfaces :</p><ul><li>I2C</li><li>UART (9600, 115200 and 1000000 Bps)</li></ul><p>microSD card reader (card not included)</p><p>Buttons :</p><ul><li>Function buttons (left, right and select)</li><li>Teach button</li></ul><p>Brightness adjustable from 1 to 100% (default 80%)</p><p>Front white LEDs (x2) : adjustable from 1 to 100% (default 50%)</p><p>RGB LED indicator</p><p>Dimensions : 52 x 44.5 mm</p>>

<huskylensmoduleai>

<<p>Connect Grove sensors and actuators to a micro:bit board with a mini version of the shield!</p><p>BitMaker is a credit card sized shield designed to connect a micro:bit card with Grove elements.</p><p>The shield includes :</p><ul><li> 4 addressable RGB leds</li><li> Buzzer on pin P0</li><li> Overload protection (1.5 A max)</li><li> Module dimensions: 70 mm x 57 mm x 12 mm</li></ul><p>Manufacturer: Bitmaker</p><p>Reference : 114992653</p>>

<114992653>

<>

<DEV15837>

<<p>Expansion board allowing access to all the I/O of a micro:bit board on 21 pins with a 2.54 mm pitch.</p><p>The board allows prototyping in 3 mini zones (3 V, ground and 3 free isolated zones).</p><p>Manufacturer: Kitronik</p><p>Reference : KITRO5601B</p>>

<KITRO5601B>

<<h2>Kitronik Halo HD - L’anneau de lumière interactif pour BBC micro:bit !</h2> <p>Transformez vos projets micro:bit avec un incroyable anneau de <strong>60 LEDs RGB adressables individuellement</strong> ! La carte <strong>Halo HD</strong> de Kitronik est spécialement conçue pour les BBC micro:bit V1 & V2, offrant des possibilités infinies d’éclairage et d’interactions sonores.</p> <h3>Points Forts :</h3> <ul> <li><strong>Son et lumière à l'unisson</strong> : Profitez du <strong>microphone MEMS intégré</strong> pour détecter le son et du <strong>buzzer piézoélectrique</strong> pour jouer des sons directement à partir de votre micro:bit.</li> <li><strong>Précision temporelle</strong> : Grâce à l'<strong>horloge en temps réel</strong> (RTC) intégrée et contrôlée via le bus I2C, vos projets pourront suivre le temps avec précision.</li> <li><strong>Connectivité étendue</strong> : Utilisez les <strong>deux sorties P1 et P2</strong> pour connecter des composants supplémentaires à vos créations.</li> <li><strong>Plug & Play</strong> : Aucune soudure nécessaire ! Insérez simplement votre micro:bit V1 ou V2 dans le <strong>connecteur EDGE</strong> pour commencer.</li> <li><strong>Alimentation embarquée</strong> : Avec un logement pour <strong>3 piles AA</strong> et un interrupteur intégré, la carte alimente directement votre micro:bit, facilitant les projets portables.</li> </ul> <h3>Caractéristiques Techniques :</h3> <ul> <li><strong>Tension d'alimentation</strong> : 3,5V à 5V.</li> <li><strong>60 LEDs RGB</strong> : Contrôlez chaque LED indépendamment pour des effets visuels éblouissants.</li> <li><strong>3 canaux externes</strong> : Gérez 1 LED et 2 broches IO, avec une capacité de 3V à 50mA par canal.</li> <li><strong>Consommation maximale</strong> : 0,9A avec toutes les LEDs à pleine puissance (15mA par LED).</li> <li><strong>Microphone MEMS</strong> : <ul> <li>Sensibilité : -42 dBV/Pa (typique).</li> <li>Rapport signal/bruit : 59 dB pour des détections précises.</li> </ul> </li> <li><strong>Ports assignés</strong> : <ul> <li>LEDs : P8.</li> <li>Microphone : P0 (entrée analogique).</li> <li>Buzzer : P14.</li> <li>RTC : P19 & P20 via I2C.</li> <li>P1 et P2 : Alimentation par la batterie +V, Signal IO et GND.</li> </ul> </li> </ul> <h3>Dimensions :</h3> <ul> <li><strong>Diamètre</strong> : 87 mm pour une surface d'éclairage impressionnante.</li> <li><strong>Espacement des trous de montage</strong> : 68,4 mm (compatible avec les vis M3).</li> </ul> <p><strong>Référence Kitronik</strong> : 5672<br> <strong>Compatibilité</strong> : BBC micro:bit V1 & V2</p> <p>Idéal pour donner vie à vos projets interactifs et lumineux, cette carte est un véritable atout pour tous les créateurs, petits et grands !</p> >

<Kitro5672>

<<p>Survey your environment with the Enviro:bit module.</p><p>The Enviro:bit module from Pimoroni contains:</p><ul><li> 1 temperature, humidity and pressure sensor (BME280)</li><li> 1 light and color sensor (TCS3472)</li><li> 1 MEMS microphone</li></ul><p>This module allows the measurement of several environmental data: temperature, humidity, pressure, light, color and noise thanks to the integrated microphone.</p><ul><li> Dimensions of the module: 66 mm x 28 mm x 12 mm</li></ul><p>Manufacturer: Pimoroni</p><p>Reference : PIM355</p>>

<PIM355>

<<p>The Grove Shield Pico is an interface board for easy, quick and solder-free connection of Grove sensors and actuators to a Raspberry Pi Pico board.</p>>

<103100142>

<<p>Connect up to 16 Grove connectors to your Arduino board with this Grove Shield.</p><ul><li> Equipped with 16 Grove connectors (4 analog inputs, 7 digital inputs/outputs, 4 I2C interfaces and 1 UART interface) it allows you to connect your Grove sensors and actuators easily and without soldering</li></ul><p>The shield has :</p><ul><li> 1 LED: reset indicator</li><li> 1 reset push-button</li><li> 16 4-pin connectors</li><li> Module dimensions: 70 mm x 54 mm x 20 mm</li></ul><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Base_Shield_V2/'>https://wiki.seeedstudio.com/Base_Shield_V2/</a>)</p><p>Reference : 103030000</p>>

<103030000>

<<p>Save your measurements on an SD card with this Grove Arduino Shield.</p><ul><li> Add storage to your Arduino projects with the Arduino Grove SD shield</li><li> Power supply: 5 V</li><li> Adapter for micro-SD</li><li> Module dimensions: 69 mm x 54 mm</li></ul><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/SD_Card_shield_V4.0/'>https://wiki.seeedstudio.com/SD_Card_shield_V4.0/</a>)</p><p>Reference : 103030005</p>>

<103030005>

<<p>Connect up to 8 Grove connectors on your Arduino Nano with this Grove Arduino Nano Shield.</p><ul><li> Equipped with 8 Grove connectors (3 analog inputs, 3 digital inputs/outputs, 1 I2C interface and 1 UART interface) it allows you to connect your Grove sensors and actuators easily and without soldering</li><li> Module dimensions: 45 mm x 41 mm x 11 mm</li></ul><p>Manufacturer: Seeed Studio Seeed Studio</p><p>Reference : 103100124</p>>

<103100124>

<<p>Control two DC motors with this motor shield for Arduino board.</p><ul><li> Shield for Arduino board allowing the control of two DC motors in both directions. It will be perfect for the creation of motorized robot.</li><li> This shield has a jumper to allow the power supply of the Arduino board via the Vin port and LEDs indication.</li><li> This module can be attached to the Grove shield. The connection of the power supply and motors is done using screw terminals.</li><li> Motor power supply: 5 to 28 V</li><li> Maximum current: 3 A</li></ul><p>Reference: 2503</p>>

<2503>

<<p><b>IR Camera for Raspberry Pi: perfect for night vision with adjustable focus and extended compatibility.</b></p> <p><b>Features:</b><br> This infrared camera is compatible with Raspberry Pi models 4B, 3B+, and 3B. It supports the installation of infrared light for night vision, making it ideal for projects that require performance in low-light conditions.<br><br> Equipped with an adjustable focus function, you can set the lens according to the distance of the object you want to capture. Additionally, for HD/night vision models, you can manually switch between normal and night vision modes. The settings are made directly through the "config.txt" configuration file. Here are the steps for manual switching:<br> <ul> <li>Default normal vision mode.</li> <li>To enable night vision mode, open the configuration file with the command: <i>sudo nano /boot/config.txt</i>.</li> <li>Add: <i>disable_camera_led = 1</i> for non-night vision mode.</li> <li>Add: <i>disable_camera_led = 2</i> for night vision mode.</li> <li>Save with <i>Ctrl + O</i>, then exit with <i>Ctrl + X</i> and reboot your Raspberry Pi.</li> </ul> 100% brand new and high quality, this camera guarantees excellent performance for your surveillance or robotics projects.</p> <p><b>Technical Specifications:</b></p> <ul> <li>Sensor: 5 MP</li> <li>Chip: OV5647</li> <li>CCD Size: 1/4 in</li> <li>Focal Length: 3.6 mm (adjustable)</li> <li>Field of View: 60°</li> <li>Resolution: 1080P</li> <li>Size: 25 mm x 24 mm</li> <li>Mode: Infrared night vision</li> <li>Infrared Light: Supports installation</li> <li>Cable Length: 145 mm (5.7 in)</li> </ul> >

<WV12076>

<<p>Grove shield for ESP32CAM with 2 Grove connectors (1 UART + 1 digital)</p>>

<SHIELDESP32CAM>

<<p>The X-NUCLEO-IKS01A3 is a motion MEMS and environmental sensor evaluation board system.</p>>

<XNUCLEOIKS01A3>

<<p>The TI-Innovator Hub, developed by Texas Instruments, is an autonomous and portable microcontroller! It can be connected to the TI 83 Premium Edition CE calculator.</p><p>Equipped with different input and output ports for Grove type sensors, this module has :</p><ul><li> 1 red-green-blue LED (RGB)</li><li> 1 red LED</li><li> 1 light level sensor</li><li> 1 speaker.</li><li> 1 Test board connector with 20 labeled pins</li><li> I²C port</li><li> Mini-USB port (DATA port intended for connection to a TI graphing calculator or a computer running TI-Nspire™ CX software)</li><li> Micro-USB port (POWER port for connecting to an external power source)</li></ul><p>Powered by a TI LaunchPad™ MSP-EXP432P401-ET card</p><p>Manufacturer: Texas Instruments</p><p>Reference: 03243480105682</p>>

<03243480105682>

<<p> Motor control board for micro:bit V1 and V2 (not included) based on an HR8833 allowing control of up to four 750 mA DC motors per channel or two stepper motors. </p> <p> <b> Features : </b> </p> <p> This card can also control 8 servomotors. The module features several LEDs to indicate the direction of rotation of the motors. </p> <p> <b> Technical specifications : </b> </p> <p> <li> Power supply : 3.5 to 5.5 Vdc via : <ol> <li> USB (USB cable included) <li> Power connector 5.5 x 2.1 mm <li> Screw terminals </ol> <li> Micro:bit interface on 3-pin connectors : P0, P1, P2, P8, P12, P14, P15 and P16 <li> Servomotor interface on 3-pin connectors : S1 to S8 <li> DC or stepper motor interface on screw terminals : M1 to M4 <li> Max. current : 750 mA per channel <li> Digital output voltage : 0 and 3.3 Vdc <li> ​Analog output voltage : 0 to 3.3 Vdc <li> Dimensions : 63 x 58 mm <li> Weight : 67 grams <li> <b> Micro:bit V1 and V2 compatible </b> </p> >

<DFR0548>

<<p>Enviro+Air quality by Pimoroni is the perfect product for temperature, pressure, humidity, light and noise measurements.</p><p>BME280 temperature, pressure, humidity sensor</p><p>LTR-559 light and proximity sensor</p><p>MICS6814 Analogue gas sensor</p><p>ADS1015 Analogue to digital converter</p><p>MEMS microphone</p><p>Integrated connector for an optional Particulate Matter (PM) sensor</p><p>Full colour 0.96" IPS LCD display (160x80)</p><p>Compatible with all Raspberry Pi models with 40-pin header</p><p>Dimensions (HxWxD): 9x65x30mm</p>>

<PIM486>

<<p>Module Grove Base Hat Zero</p>>

<103030276>

<>

<114991850>

<<p>Robot mouse to program without screen.</p><p>Contains 16 plates to make mazes and 10 coding cards with missions to complete to collect the cheese!</p><p>Coding via mouse buttons and construction of the program with the 30 cardboard cards.</p>>

<LER2831>

<<p>Experience algorithmic programming in a completely unplugged and eco-friendly way with wooden blocks and over fifty progressive, fun challenges.</p> <p><b>This kit includes:</b></p> <ul> <li>25 wooden instruction blocks, in different colors</li> <li>1 set of 10 magnetic numbers</li> <li>16 magnetic characters (archers, enemies, treasures)</li> <li>1 rulebook</li> <li>1 booklet with 40 colored challenges</li> </ul> <p>This <b>Code en Bois school kit</b> for 1 team will allow you to start equipping yourself and testing our pedagogy with a few students.</p> <p>With the 25 wooden blocks, each participant will complete up to forty challenges to gradually discover the key principles of algorithmic thinking: loops, repetition, conditional structures, indentation, etc. Extensions for additional challenges are available in digital format.</p> <p>Produced and developed in France, the <b><a href="https://www.codeenbois.fr/">Code en Bois</a></b> method, inspired by Montessori pedagogy, has been tested in schools from 1st to 8th grade, as well as with adult audiences.</p> >

<SOLOCodeBois>

<<p>A kit to take anywhere to do algorithmic programming with the family, in a completely disconnected and ecological way with all-wooden bricks and around forty progressive fun challenges.</p><p>DESCRIPTION</p><p>Experiment with algorithmic programming without a screen or electronics, with all-wooden bricks and around forty progressive fun challenges. Designed with the Les Maths en Scène association, this kit is a practical, family-friendly version of our Code en Bois equipment to take anywhere.</p><p>This kit includes:</p><ul><li>24 wooden instruction bricks, in different colors</li><li>1 set of 10 magnetic numbers</li><li>1 “robot” magnetic character</li><li>1 rulebook</li><li>1 notebook of 40 color challenges</li></ul><p>This Wooden Code kit will allow you to play alone or with up to 3 players. With the 24 wooden bricks, you will complete forty challenges to discover step by step the main principles of algorithms: repetitions, loops, conditional structures, indentation, etc.</p><p>Produced and developed in France, the Code en Bois method, inspired by Montessori pedagogy, has been tested in schools from CE1 to 4th grade, but also with an adult audience.</p><p>Classy pack also available!</p>>

<SAMCodeBois>

<<p>Experience algorithmic programming in a completely unplugged and eco-friendly way with all-wooden blocks and around fifty fun, progressive challenges.</p> <p>This kit includes:</p> <ul> <li>150 wooden instruction blocks in different colors</li> <li>6 sets of 10 magnetic numbers</li> <li>16 magnetic characters (archers, enemies, treasures)</li> <li>1 rulebook</li> <li>1 booklet with 40 colored challenges</li> </ul> <br> <p>This Code en Bois kit allows you to conduct introductory programming workshops for 6 teams (between 6 and 18 people at once), without a computer or electronic circuits.</p> <p>With the 25 wooden blocks, each participant will complete around twenty challenges to gradually discover the main principles of algorithms: loops, conditional structures, indentation, etc. Additional challenges are available in digital format.</p> <br> <p>Produced and developed in France, the Code en Bois method, inspired by Montessori pedagogy, has been tested in schools from 1st to 8th grade, as well as with adult audiences.</p> <p><a href="https://fr.vittascience.com/shop/314/code-en-bois---kit-solo">Solo kit also available!</a></p>>

<EDUCodeBois>

<<p>This Grove starter kit for Arduino includes a basic shield and fourteen sensors and accessories. The only obstacle to the realization of your projects will be your imagination.</p><p>The kit contains:</p><ul><li> 1 Grove base shield</li><li> 1 LCD screen 2x16 characters RGB</li><li> 1 Grove 5mm LED module + 3 LEDs (1 red, 1 green and 1 blue)</li><li> 1 Grove button</li><li> 1 relay module</li><li> 1 Grove buzzer</li><li> 1 Grove sound sensor</li><li> 1 Grove angle sensor</li><li> 1 Grove touch sensor</li><li> 1 Grove temperature sensor</li><li> 1 Grove light sensor</li><li> 1 Grove servo motor</li><li> 10 Grove 20 cm cords</li><li> 1 battery coupler 9 V</li></ul><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove_Starter_Kit_v3/'>https://wiki.seeedstudio.com/Grove_Starter_Kit_v3/</a>)</p><p>Reference : 110060024</p>>

<110060024>

<<p>Resulting from the collaboration between Arduino and Seeedstudio, the Arduino Sensor Kit is a board extension module adapted for education and gathering several sensors.</p><p>This kit contains a shield for Arduino Uno board and 10 Grove modules:</p><ul><li> red LED</li><li> buzzer</li><li> oled display</li><li> push button</li><li> potentiometer</li><li> sound sensor</li><li> light sensor</li><li> temperature and humidity sensor DHT11</li><li> pressure and temperature sensor BMP280</li><li> 3-axis accelerometer</li></ul><p>Manufacturer: Seeed Studio</p><p>Reference: 103030375</p>>

<103030375>

<<p>Programming beginners will appreciate the presence of a manual to guide them through 12 new electronic projects including: a music player, luminous and multicolored creations, or an ultrasonic measuring tool. The more daring, looking for new ideas to advance their skills, will be able to take advantage of complete code libraries, in open source of course!</p><p>This kit includes:</p><ul><li> 1 Grove shield for micro:bit</li><li> 1 Grove rotary angle sensor</li><li> 1 Grove speaker</li><li> 1 Grove ultrasonic rangefinder</li><li> 1 Grove light sensor v1.2</li><li> 1 Grove WS2812 waterproof LED string (1 meter, 30 LEDs)</li><li> 1 Grove motion sensor</li><li> 1 Grove digital display (4 digits)</li><li> 1 Grove red LED</li><li> 1 micro USB cable 48 cm</li><li> 1 manual for 12 projects</li><li> 10 cables with alligator clip connectors</li><li> 7 Grove cables</li></ul><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove_Inventor_Kit_for_microbit/'>https://wiki.seeedstudio.com/Grove_Inventor_Kit_for_microbit/</a>)</p><p>Reference : 110060762</p>>

<110060762>

<<p>Get started with ease with this starter kit for Raspberry Pi4.</p><p>This starter kit includes:</p><ul><li> 1 Raspberry Pi4 2GB board</li><li> 1 Okdo protective case</li><li> 1 NOOBS microSD 32GB card</li><li> 1 official USB-C power supply</li><li> 1 micro-HDMI to HDMI cable 1m long</li><li> 1 set of 4 heat sinks</li></ul><p>Manufacturer: HutoPi</p><p>Reference : KITPI42GB</p>>

<KITPI42GB>

<<p>Program your connected objects in Scratch, Blockly or Python with this extensible kit.</p><p>The kit consists of :</p><ul><li> a Raspberry Pi Zero WH connectable by wifi, bluetooth or usb</li><li> a board with 10 sensors, 5 actuators, and 4 Grove ports to extend it without limits.</li></ul><p>Suitable for middle and high school (SNT and NSI), it is programmed from its browser, which helps to understand its errors thanks to a step-by-step mode in full simulation or connected to the board.</p><p>This kit is designed by the France-ioi association to accompany discovery courses made up of numerous automatically validated exercises, which allow you to learn how to program a reversing alarm, an anti-intrusion alarm, a connected animal, an applause meter, and to imagine your own projects without limits.</p><p>Grove expansion ports allow you to add many commercially available Grove sensors and actuators, such as servo motors or temperature sensors, humidity sensors, etc. (not included)</p><p>The kit comes already assembled and ready to use.</p><p>Find more details and many resources on the quick-pi.org website.</p><p>Manufacturer: Quick Pii</p><p>Reference : KQUICKPI</p>>

<KQUICKPI>

<<p>Go on an adventure without fear of getting wet! This kit allows the realization of measurements in a pond.</p><p>This kit includes:</p><ul><li> 1 Arduino board</li><li> 1 Grove shield</li><li> 1 waterproof temperature sensor</li><li> 1 turbidity sensor</li><li> 1 openlog for data recording</li><li> 1 pH sensor.</li></ul><p>Delivered with the necessary connectic for mounting.</p><p>Manufacturer : Vittascience</p><p>Reference : 3760327670283</p>>

<3760327670283>

<<p>Go on an adventure without fear of getting wet! This kit allows the realization of measurements in a pond.</p><p>This kit includes:</p><ul><li> 1 micro:bit card</li><li> 1 Grove shield</li><li> 1 waterproof temperature sensor</li><li> 1 turbidity sensor</li><li> 1 openlog for data recording</li><li> 1 pH probe.</li></ul><p>Delivered with the necessary connectic for mounting.</p><p>Manufacturer : Vittascience</p><p>Reference : 3760327670290</p>>

<3760327670290>

<>

<SEN15901>

<<p>Easily measure distances from 3 to 350cm with the Grove Ultrasonic Rangefinder module.</p><ul><li>Based on a 40kHz ultrasonic transducer</li><li>Easy to use with Grove connectivity;</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Resolution: 1cm</li><li>Module dimensions: 50mm x 25mm x 16mm</li><li>Weight: 13g</li></ul><p>Examples of application: reversing radar, automatic barrier, ...</p><p>Grove cable provided.</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Ultrasonic_Ranger/'>https://wiki.seeedstudio.com/Grove-Ultrasonic_Ranger/</a>)</p><p>Reference : 101020010</p>>

<101020010>

<<p>Easily measure distances from 10 to 80cm with the Grove infrared proximity sensor.</p><ul><li>Based on a Sharp GP2Y0A21YK sensor that gives it the ability to measure a close distance;</li><li>Easy to use thanks to the Grove connectivity;</li><li>Requires a card extension: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Module dimensions: TO BE MEASURED</li><li>Weight: 9g</li></ul><p>Application examples: automatic point counting (basketball)</p><p>Grove cable included.</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-80cm_Infrared_Proximity_Sensor/'>https://wiki.seeedstudio.com/Grove-80cm_Infrared_Proximity_Sensor/</a>)</p><p>Reference : 101020042</p>>

<101020042>

<<p>Measure vibration, sense impact and touch with the Grove vibration sensor.</p><ul><li>Based on a LDT0-028 module, it returns a current when the sensor moves;</li><li>Easy to use thanks to the Grove connector, adjustable sensitivity with a potentiometer;</li><li>Frequency range: 0.001Hz to 1GHz for accurate measurement;</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Module dimensions: TO BE MEASURED</li><li>Weight: 12g</li></ul><p>Examples of application : Earthquake station, vibration detector,...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Piezo_Vibration_Sensor/'>https://wiki.seeedstudio.com/Grove-Piezo_Vibration_Sensor/</a>)</p><p>Reference : 101020031</p>>

<101020031>

<<p>Detect noise with the Grove sound sensor.</p><ul><li>Based on an electret microphone and an L358 amplifier</li><li>Easy to use thanks to the Grove connector</li><li>Microphone impedance: 2.2kOhms</li><li>Microphone frequency range: 16-20kHz</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Module dimensions: 20mm x 40mm</li><li>Weight: 9g</li></ul><p>Application examples: Sound level meter, ...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Sound_Sensor/'>https://wiki.seeedstudio.com/Grove-Sound_Sensor/</a>)</p><p>Reference : 101020023</p>>

<101020023>

<<p>Measure the amperage of a current with the Adafruit INA219B module.</p><ul><li>Based on the INA219B sensor it is capable of measuring a continuous current up to 3.2 A</li><li>Resolution: 0.8 mA</li><li>Accuracy: ± 1 %.</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Module dimensions: 26mm x 20mm x 5mm</li><li>Weight: 10g</li></ul><p>Application examples: DIY ammeter, ...</p><p>Manufacturer : Adafruit</p><p>Reference : INA219B</p>>

<INA219B>

<<p>Measure the moisture in your soil with the Grove moisture sensor.</p><ul><li>This sensor allows you to know the water content of the soil and returns an analog value.</li><li>Easy to use thanks to the Grove connector</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Module dimensions: 60mm x 20mm x 13mm</li><li>Weight: 10g</li></ul><p>Examples of application : Connected plant, automatic watering, ...</p><p>Grove cable provided.</p><p>Manufacturer: seeedstudio (<a href='https://wiki.seeedstudio.com/Grove-Moisture_Sensor/'>https://wiki.seeedstudio.com/Grove-Moisture_Sensor/</a>)</p><p>Reference : 101020008</p>>

<101020008>

<<p>Measure water level with the Grove sensor.</p><ul><li>Its printed tracks allow it to indicate whether the sensor is dry, wet, or totally submerged.</li><li>Easy to use thanks to the Grove connector, it returns an analog or binary value (0 or 1).</li><li>Range of use: 10°C to +30°C</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any 5V card;</li><li>Module dimensions: 20mm x 20mm</li><li>Weight :</li></ul><p>Application examples: rain sensor, water leak detector, overflow detection.</p><p>Grove cable included.</p><p>Manufacturer: seeedstudio (<a href='https://wiki.seeedstudio.com/Grove-Water_Sensor/'>https://wiki.seeedstudio.com/Grove-Water_Sensor/</a>)</p><p>Reference : 101020018</p>>

<101020018>

<<p>Measure the pH (hydrogen potential) of a liquid with this probe.</p><ul><li>This probe measures the pH between 0 and 14 with a temperature between 0°C and +60°C and returns an analog value.</li><li>Library required for use</li><li>Accuracy: ± 0.1 pH at 25°C</li><li>Dimensions of the module: for the probe: Ø12mm x 145 mm; for the interface: 42mm x 32mm x 15mm</li><li>Weight :</li></ul><p>Application examples: pH meter</p><p>Manufacturer : DFRobot</p><p>Reference : SEN0161V2</p>>

<SEN0161V2>

<<p>Measure the amount of rainfall with this rain gauge.</p><ul><li>Measure rainfall with an ILS contact that closes momentarily for every 0.2794mm of water height and gives a pulse</li><li>Easy to use with the Grove connection board for micro:bit or Arduino (url broken link)</li><li>Self-emptying.</li><li>Module dimensions:</li><li>Weight:</li></ul><p>Application examples: Weather station</p><p>Manufacturer: Lextronic</p><p>Reference : LEXCA001</p>>

<LEXCA001>

<<p>Measure the wind strength with the anemometer.</p><ul><li>Measure wind strength with an ILS contact that closes with each full rotation</li><li>One pulse closure per second equals a wind speed of 2.4 km/h</li><li>Easy to use with the Grove micro:bit or Arduino connection board</li><li>Ideally designed for initiation and pedagogy.</li><li>Module dimensions:</li><li>Weight:</li></ul><p>Application examples: Weather station</p><p>Manufacturer: Lextronic</p><p>Reference : LEXCA003</p>>

<LEXCA003>

<<p>The accessory for your weather measurements.</p><ul><li>Board allowing to connect the anemometer and the rain gauge to an Arduino or micro:bit board with Grove connectic</li><li>It is possible to connect 2 weather sensors simultaneously via the RJ11 connectors</li><li>Requires a board extension: Shield Grove (#category-14);</li><li>Module dimensions :</li><li>Weight :</li></ul><p>Application examples: Weather station</p><p>Manufacturer : Lextronic</p><p>Reference : DEV-LEX2</p>>

<DEVLEX2>

<<p>Measure the amount of suspended particles in liquids with the Grove Turbidity Sensor.</p><ul><li>Based on an optical sensor, it allows to know the quantity of particles in suspension in a liquid.</li><li>It has a switch to choose the output mode (digital or analog)</li><li>Easy to use thanks to the Grove connector</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Module dimensions: 20mm x 40mm</li><li>Weight :</li></ul><p>Application examples: Water quality measurement</p><p>WARNING: only the end of the probe is waterproof</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Turbidity-Sensor-Meter-for-Arduino-V1.0/'>https://wiki.seeedstudio.com/Grove-Turbidity-Sensor-Meter-for-Arduino-V1.0/</a>)</p><p>Reference : 101020752</p>>

<101020752>

<<p>Determine the color of a light or object with the Grove color sensor.</p><ul><li>Based on the TCS34725FN sensor it allows you to determine the color of a light or an object</li><li>Has 16 photodiodes with different color filters (4 red, 4 green, 4 blue, 4 without filter)</li><li>Easy to use thanks to Grove connectivity;</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Module dimensions: 42mm x 23mm x 10mm</li><li>Weight: 11g</li></ul><p>Application examples: automatic color sorting, ...</p><p>Grove cable supplied.</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-I2C_Color_Sensor/'>https://wiki.seeedstudio.com/Grove-I2C_Color_Sensor/</a>)</p><p>Reference : 101020341</p>>

<101020341>

<<p>Follow the line with your robot with this Grove infrared module.</p><ul><li>Based on an infrared led and a phototransistor, it sends back a digital signal (0 : line not detected or 1 : black line detected)</li><li>Easy to use thanks to the Grove connectic</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Detection distance: 1.5 to 5cm adjustable with a potentiometer</li><li>Module dimensions: 24.2mm x 20mm x 10.8mm</li><li>Weight: 8g</li></ul><p>Application examples: line-following robot</p><p>Grove cable supplied.</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Line_Finder/'>https://wiki.seeedstudio.com/Grove-Line_Finder/</a>)</p><p>Reference : 101020172</p>>

<101020172>

<<p>Detect motion with the Grove PIR sensor.</p><ul><li>Based on an infrared sensor, it is able to detect the presence of a person or animal and generates a high signal in response;</li><li>Easy to use thanks to Grove connectivity</li><li>Requires a card extension: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Detection distance: 3.2 to 12m</li><li>Response time: < 1s</li><li>Maximum detection angle: 100°.</li><li>Module dimensions: 20mm x 20mm x 11.5mm</li><li>Weight: 3g</li></ul><p>Application examples: Alarm system</p><p>Grove cable supplied.</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Digital-PIR-Sensor/'>https://wiki.seeedstudio.com/Grove-Digital-PIR-Sensor/</a>)</p><p>Reference : 101020793</p>>

<101020793>

<<p>Light sensor Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<101020132>

<<p>Measure visible, infrared and UV light with the Grove SI1145 sensor.</p><ul><li>Based on the SI1145 sensor, it communicates via the I2C bus and is therefore compatible with all types of microcontrollers.</li><li>Efficient and very accurate over the entire light spectrum</li><li>Sensor compatible with any card from 3.3V to 5V;</li><li>Wavelength: 540 nm</li><li>Module dimensions: 20mm x 18mm x 12mm</li><li>Weight :</li></ul><p>Application examples: Automatic lighting.</p><p>Manufacturer : SiLabs</p><p>Reference : SI1145</p>>

<101020089>

<<p>Measure the UV of light with the Grove UV sensor.</p><ul><li>Based on the GUVA-S12D module, it measures UV from 200 to 370 nm</li><li>Easy to use thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Wavelength: 200 to 370 nm</li><li>Module dimensions: 20mm x 20mm x 15mm</li><li>Weight: 8g</li></ul><p>Application examples: UV exposure detector</p><p>Manufacturer: Seeed Studio Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-UV_Sensor/'>https://wiki.seeedstudio.com/Grove-UV_Sensor/</a>)</p><p>Reference : 101020043</p>>

<101020043>

<<p>Measure the presence of multiple gases with the MQ135 gas sensor.</p><ul><li>Based on a MQ135 sensor it is sensitive to benzene, ammonia, sulfur, smoke and air pollution.</li><li>Analog or digital output with adjustable threshold by a potentiometer.</li><li>Sensor compatible with any 5V card;</li><li>Measuring range: 10 to 1000 ppm</li><li>Module dimensions: 53mm x 20mm x 13mm</li><li>Weight : 8g</li></ul><p>WARNING: this sensor is educational and cannot be used as a security object</p><p>CAUTION: the module heats up when in use</p><p>Application examples: Gas leak detector, ...</p><p>Manufacturer: Joy-It</p><p>Reference : MQ135</p>>

<MQ135>

<<p>Breathe easy with the SGP30 multi-pixel gas sensor.</p><ul><li>Fully integrated MOX gas sensor; Sensirion's ultra fine air quality sensor.</li><li>Returns a total volatile organic compound (TVOC) reading and an equivalent carbon dioxide (eCO2) reading</li><li>Easy to use with Grove connectivity</li><li>Requires an expansion card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measurement range :</li><li> TVOC: 0ppb to 60,000ppb</li><li> Resolution depending on the concentration (from 1 to 30 ppb)</li><li> eCO2: 400ppm to 60,000ppm</li><li> Resolution dependent on concentration (from 1 to 30 ppm)</li><li>Sampling frequency: 1 Hz</li><li>Module dimensions: 40mm x 20mm x 16mm</li><li>Weight: 9g</li></ul><p>CAUTION: This sensor is educational and cannot be used as a security object</p><p>Application examples: Air quality sensor, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-VOC_and_eCO2_Gas_Sensor-SGP30/'>https://wiki.seeedstudio.com/Grove-VOC_and_eCO2_Gas_Sensor-SGP30/</a>)</p><p>Reference : 101020512</p>>

<101020512>

<<p>Detect many gases as well as volatile organic compounds with the Grove multi-channel sensor.</p><ul><li>Based on MEMS technology allowing a reduced size and 4 separate sensors, it can detect many gases: Nitrogen Dioxide (NO2), Carbon Monoxide (CO), Ethanol (C2H5OH) and VOCs</li><li>Easy to use thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measurement ranges:</li><li> NO2: 0.1ppm to 10 ppm</li><li> CO : 5ppm to 5000 ppm</li><li> C2H5OH : 1ppm to 500 ppm</li><li> VOC : 1ppm to 500 ppm</li><li>Module dimensions: 40mm x 20mm x 16mm</li><li>Weight: 9g</li></ul><p>WARNING: a heating time is necessary for the good functioning of the sensor.</p><p>CAUTION: this sensor is educational and cannot be used as a security object</p><p>Application examples: Air quality sensor, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Multichannel-Gas-Sensor-V2/'>https://wiki.seeedstudio.com/Grove-Multichannel-Gas-Sensor-V2/</a>)</p><p>Reference : 101020820</p>>

<101020820>

<<p>Measure the concentration of oxygen in the air with the Grove oxygen sensor.</p><ul><li>Based on a MIX8410, it offers excellent sensitivity and linearity.</li><li>Easy to use thanks to the Grove connectivity</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: 0 to 25</li><li>Response time: < 10 seconds</li><li>Operating range: -20°C to +50°C</li><li>Module dimensions: 20mm x 40mm x 10mm</li><li>Weight :</li></ul><p>Application examples: air quality sensor, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Gas_Sensor-O2/'>https://wiki.seeedstudio.com/Grove-Gas_Sensor-O2/</a>)</p><p>Reference : 101990680</p>>

<101020002>

<<p>Measure the concentration of carbon dioxide in the air with the Grove CO2 Sensor.</p><ul><li>Based on the MH-Z16B infrared sensor, it offers high sensitivity and resolution.</li><li>Easy to use with Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any 5V card;</li><li>Measuring range: 0 to 2000 ppm</li><li>Accuracy: 200 ppm</li><li>Resolution: 1 ppm</li><li>Response time: > 90 seconds</li><li>Warm-up time: 3 minutes</li><li>Range of use: 0°C to +50°C</li><li>Module dimensions: 100mm x 150mm x 20mm</li><li>Weight :</li></ul><p>Application examples: Air quality sensor, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-CO2_Sensor/'>https://wiki.seeedstudio.com/Grove-CO2_Sensor/</a>)</p><p>Reference : 101020067</p>>

<101020067>

<<p>Measure CO2, temperature and humidity with this Grove sensor.</p><ul><li>Based on Sensirion's SCD30 non-dispersive infrared sensor.</li><li>3 in 1 sensor and easy to use thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>CO2 :</li><li> Measurement range: 0 to 40 000 ppm</li><li> Accuracy: 30 ppm</li><li> Response time: 20 seconds</li><li>Temperature :</li><li> Measuring range: -40 to 70 °C</li><li> Accuracy: 0.5 °C from 0 to 50 °C</li><li> Response time: 2 seconds</li><li>Humidity :</li><li> Measuring range: 0 to 100 %RH</li><li> Accuracy: 2 %RH</li><li> Response time: 8 seconds</li><li>Module dimensions: 61mm x 42mm x 19mm</li><li>Weight: 19.7g</li></ul><p>Application examples: Air quality sensor, weather station ...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-CO2_Temperature_Humidity_Sensor-SCD30/'>https://wiki.seeedstudio.com/Grove-CO2_Temperature_Humidity_Sensor-SCD30/</a>)</p><p>Reference : 101020634</p>>

<101020634>

<<p>Measure CO2 concentration, temperature and humidity at the same time with the SCD30 sensor.</p><ul><li>Based on non-dispersive infrared technology NDIR</li><li>3 in 1 sensor</li><li>Compatible with any card from 3.3 to 5V;</li></ul><p>1. CO2 :</p><ul><li> Measuring range: 0 to 40 000 ppm</li><li> Accuracy: 30 ppm</li><li> Response time: 20 seconds</li></ul><p>2. Temperature :</p><ul><li> Measuring range: -40 to 70 °C</li><li> Accuracy: 0.5 °C from 0 to 50 °C</li><li> Response time: 2 seconds</li></ul><p>3. Humidity :</p><ul><li> Measuring range: 0 to 100 %RH</li><li> Accuracy: 2 %RH</li><li> Response time: 8 seconds</li><li>Module dimensions: 35mm x 23mm x 7mm</li><li>Weight: 3.4g</li></ul><p>Application examples: Air quality sensor, weather station ...</p><p>Manufacturer : Sensirion</p><p>Reference : SCD30</p>>

<SCD30>

<<p>Measure the amount of fine particles in the air in real time with this Grove sensor.</p><ul><li>Based on a high-sensitivity HM3301 laser sensor, it accurately measures the level of fine particles in the air.</li><li>Easy to use with Grove connectivity</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li></ul><p>Measuring range: 1 to 500µg/m³ Maximum value: 1000µg/m³ * Resolution: 1µg/m³</p><ul><li>Resolution: 1 µg/m³.</li><li>Range of use: -10°C to +60°C</li><li>Heating time: 30 seconds</li><li>Module dimensions: 80mm x 41mm x 17mm</li><li>Weight :</li></ul><p>Examples of uses: dust detectors, smart air cleaners, smart air conditioners, smart ventilation fans, air quality testing, electronic flow meters, environmental monitoring, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Laser_PM2.5_Sensor-HM3301/'>https://wiki.seeedstudio.com/Grove-Laser_PM2.5_Sensor-HM3301/</a>)</p><p>Reference : 101020613</p>>

<101020613>

<<p>Measure temperature, pressure and altitude with the Grove BMP280 sensor.</p><ul><li>Based on a Bosch BMP280, it allows the measurement of atmospheric pressure, temperature and altitude.</li><li>High stability and linearity, easy to use thanks to Grove connectivity</li><li>Requires a card extension: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Pressure :</li><li> Measurement range: 300 to 1100 hPa</li><li> Accuracy: 0.12 hPa (relative) and 1hPa (absolute)</li><li>Temperature:</li><li> Measuring range: 0 to +65 °C</li><li> Accuracy: 0.01°C</li><li>Module dimensions: 18mm x 12mm</li><li>Weight: 8g</li></ul><p>Examples of uses: connected thermometer, weather station, ...</p><p>Manufacturer : Bosch</p><p>Reference : BMP280</p>>

<101020192>

<<p>Measure temperature easily with the Grove temperature sensor.</p><ul><li>Based on a thermistor, this sensor detects the ambient temperature</li><li>Easy to use thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: -40°C to +125°C</li><li>Accuracy: ±1.5°C</li><li>Module dimensions: 24mm x 20mm x 9.8mm</li><li>Weight: 8g</li></ul><p>Examples of uses: connected thermometer, weather station, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Temperature_Sensor_V1.2//'>https://wiki.seeedstudio.com/Grove-Temperature_Sensor_V1.2//</a>)</p><p>Reference : 101020015</p>>

<101020015>

<<p>Measure temperature with peace of mind with the Grove waterproof temperature sensor.</p><ul><li>Based on the DS18B20 circuit, this sensor is water resistant</li><li>Easy to use thanks to Grove connectivity</li><li>Requires a board extension: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: -55°C to +125°C</li><li>Accuracy: ±0.5°C (for the range -10°C to +85°C)</li><li>Dimensions of the module :</li><li> sensor: ø 6mm x 30mm</li><li> Cable: 2m</li><li>Weight: 54g</li></ul><p>ATTENTION: only the end of the probe is waterproof</p><p>Examples of use : waterproof thermometer, weather station, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/One-Wire-Temperature-Sensor-DS18B20/'>https://wiki.seeedstudio.com/One-Wire-Temperature-Sensor-DS18B20/</a>)</p><p>Reference : 101990019</p>>

<101990019>

<<p>Measure high temperatures with this Grove sensor.</p><ul><li>Based on a K-type thermocouple probe and an amplifier, it can measure temperatures up to 600°C</li><li>Easy to use thanks to the Grove connectivity</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: -50°C to +600°C</li><li>Accuracy: ± 2.0% (+2°C)</li><li>Module dimensions :</li><li> amplifier: 40mm x 20mm x 13mm</li><li> Cable: 1m</li><li>Weight: 30g</li></ul><p>WARNING: only the end of the probe can rise to high temperatures</p><p>Examples of uses: thermometer for cooking, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-High_Temperature_Sensor/'>https://wiki.seeedstudio.com/Grove-High_Temperature_Sensor/</a>)</p><p>Reference : 111020002</p>>

<111020002>

<<p>Measure temperature and humidity with a single sensor, the DHT11.</p><ul><li>Based on a NTC thermistor and a capacitive sensor, it returns a digital output.</li><li>Easy to use thanks to the Grove connector</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Temperature :</li><li> Measurement range: 0°C to +50°C</li><li> Accuracy: 1°C</li><li>Humidity :</li><li> Measuring range: 20 to 90% RH</li><li> Accuracy: 5% RH</li><li>Module dimensions: 40mm x 20mm x 11mm</li><li>Weight:</li></ul><p>WARNING: the sensor does not work below 0°C</p><p>Examples of uses: weather station, humidity controller, connected air conditioner, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-TemperatureAndHumidity_Sensor/'>https://wiki.seeedstudio.com/Grove-TemperatureAndHumidity_Sensor/</a>)</p><p>Reference : 101020011</p>>

<101020011>

<<p>Measure temperature and humidity professionally with a single sensor, the DHT22.</p><ul><li>Based on a NTC thermistor and a capacitive sensor, it returns a digital output.</li><li>Accurate, professional and easy to use measurements thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Temperature :</li><li> Measurement range: -40°C to +80°C</li><li> Accuracy: 0.5°C</li><li> Resolution: 0.1°C</li><li>Humidity :</li><li> Measuring range: 5 to 99% RH</li><li> Accuracy: 2% RH</li><li> Resolution: 0.1% RH</li><li>Module dimensions: 40mm x 20mm x 11mm</li><li>Weight: 11g</li></ul><p>Examples of uses: thermometer, hygrometer, connected dehumidifier, environmental monitoring, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Temperature_and_Humidity_Sensor_Pro/'>https://wiki.seeedstudio.com/Grove-Temperature_and_Humidity_Sensor_Pro/</a>)</p><p>Reference : 101020019</p><p>Translated with www.DeepL.com/Translator (free version)</p>>

<101020019>

<<p>Measure temperature and humidity with the Grove SHT31 sensor.</p><ul><li>Based on a Sensirion SHT31 sensor, it offers low response time and accurate measurement.</li><li>Easy to use with Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Temperature :</li><li> Measurement range: -40°C to +125°C</li><li> Accuracy: 0.3°C</li><li>Humidity :</li><li> Measuring range: 0 to 100% RH</li><li> Accuracy: 2% RH</li><li>Module dimensions: 40mm x 20mm x 11mm</li><li>Weight: 10g</li></ul><p>Examples of uses: weather station, humidity controller, connected air conditioner, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-TempAndHumi_Sensor-SHT31/'>https://wiki.seeedstudio.com/Grove-TempAndHumi_Sensor-SHT31/</a>)</p><p>Reference : 101020212</p>>

<101020212>

<<p>6-axis Accelerometer and Gyroscope Grove sensor integrated with a 3-axis digital accelerometer and a 3-axis digital gyroscope.</p><p>LSM6DS3 digital chip and power regulator inside.</p><p>This product can be used for tilt, motion and tap sensing applications, such as robotics, IoT devices and consumer electronics.</p><p>Digital output for 6-degree-of-freedom motion data.</p><p>Full-scale finer acceleration sensing range of ±2/±4/±8/±16g for various environments.</p><p>±125, ±245, ±500, ±1000, ±2000 degrees per second (dps) for angular velocity measurement range make it versatile.</p><p>8KB data buffering.</p>>

<105020012>

<<p>Measure temperature without contact using infrared with the Grove infrared sensor.</p><ul><li>Based on 116 thermocouple elements, it returns a voltage proportional to the temperature</li><li>Easy to use with Grove connectivity</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: -10°C to +100°C</li><li>Range of use: -10°C to +80°C</li><li>Accuracy: 2°C</li><li>Module dimensions: 40mm x 20mm x 13mm</li><li>Weight: 11g</li></ul><p>Examples of uses: temperature measurement, motion detector, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Infrared_Temperature_Sensor/'>https://wiki.seeedstudio.com/Grove-Infrared_Temperature_Sensor/</a>)</p><p>Reference : 101020062</p>>

<101020062>

<<p>Recognize up to 9 hand gestures with the Grove gesture sensor.</p><ul><li>Based on the PAJ7620U2 sensor, it recognizes 9 basic gestures:</li><li> up, down, left, right, forward, backward, direct, indirect, wave</li><li>Easy to use thanks to Grove connectivity</li><li>Requires a card extension: Shield Grove (#category-14);</li><li>Sensor compatible with any 5V card;</li><li>Detection distance: 5 to 10 cm</li><li>Operating range: -40°C to +80°C</li><li>Module dimensions: 20mm x 20mm</li><li>Weight: 9g</li></ul><p>Examples of uses: control a robot, remote control, control a volume, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Gesture_v1.0/'>https://wiki.seeedstudio.com/Grove-Gesture_v1.0/</a>)</p><p>Reference : 101020083</p>>

<101020083>

<<p>Detect the tilt of an object with the Grove tilt sensor.</p><ul><li>Inside, a pair of balls make contact with the pins when the sensor is straight. In the other direction, the balls do not make contact.</li><li>This sensor is equivalent to a button (output = 0 or 1) and can be used as a digital input.</li><li>Easy to use thanks to the Grove connectic</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li></ul><p>Angle for output 1: 10° to 170°; * Angle for output 0: 190° to 200</p><ul><li>Angle for output 0: 190° to 350°.</li><li>Operating range: 0°C to +40°C</li><li>Module dimensions: 20mm x 20mm</li><li>Weight: 9g</li></ul><p>Examples of use : Tilt detection, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Tilt_Switch/'>https://wiki.seeedstudio.com/Grove-Tilt_Switch/</a>)</p><p>Reference : 101020025</p>>

<101020025>

<<p>Operate a switch thanks to the magnetic field of a magnet.</p><ul><li>Based on a reed CT10 bulb, it is activated when a magnet or an electromagnet is nearby (output 1 if magnet, 0 otherwise).</li><li>Easy to use thanks to the Grove connector</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Operating range: -40°C to +120°C</li><li>Module dimensions: 20mm x 20mm</li><li>Weight :</li></ul><p>Examples of use : Proximity detector, alarm system, pulse counting, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Magnetic_Switch/'>https://wiki.seeedstudio.com/Grove-Magnetic_Switch/</a>)</p><p>Reference : 101020038</p>>

<101020038>

<<p>Measure pressure with this Grove pressure sensor.</p><ul><li>Based on the MPX5700AP sensor and an amplifier, it measures pressure accurately.</li><li>Easy to use thanks to Grove connectivity</li><li>Requires a card extension: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: 15kPa to 700kPa</li></ul><p>Accuracy: 2.5% * Sensitivity: 6.4 m</p><ul><li>Sensitivity: 6.4 mv/kPa</li><li>Module dimensions:</li><li> Sensor: 40mm x 20mm</li><li> Tube: 55cm</li><li>Weight:</li></ul><p>Grove cable, tube and syringe supplied</p><p>Examples of uses : Pressure sensor, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Integrated-Pressure-Sensor-Kit/'>https://wiki.seeedstudio.com/Grove-Integrated-Pressure-Sensor-Kit/</a>)</p><p>Reference : 110020248</p>>

<110020248>

<<p>Measure force with this Grove load cell.</p><ul><li>Based on the FSR402 sensor, it returns an analog measurement.</li><li>Easy to use thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Measuring range: 0.2 N to 20 N</li><li>Accuracy: 2.5% * Sensitivity: 6.4 m</li><li>Sensitivity: 6.4 mv/kPa</li><li>Module dimensions: 75mm x 20mm x 11mm</li><li>Weight: 2.5g</li></ul><p>Examples of uses: Industrial controls, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Round_Force_Sensor_FSR402/'>https://wiki.seeedstudio.com/Grove-Round_Force_Sensor_FSR402/</a>)</p><p>Reference : 101020553</p>>

<101020553>

<<p>Measure skin conductivity with this GSR sensor.</p><ul><li>Based on two electrodes, measure the conductivity of the skin in analog output.</li><li>Conductivity varies according to emotions: a strong emotion causes glands to sweat and thus conductivity is higher.</li><li>Easy to use thanks to the Grove connector</li><li>Requires a card extension: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Adjustable sensitivity with a potentiometer</li><li>Module dimensions: 24mm x 20mm x 9.8mm</li><li>Weight: 29g</li></ul><p>Examples of uses: projects controlled by emotions, sleep quality, lie detector,...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-GSR_Sensor/'>https://wiki.seeedstudio.com/Grove-GSR_Sensor/</a>)</p><p>Reference : 101020052</p>>

<101020052>

<<p>Measure heart rate with the heart rate sensor.</p><ul><li>Easy to use, small size and accurate.</li><li>Connectable on the finger or earlobe</li><li>Sensor compatible with any 5V card;</li><li>Module dimensions: ø 15.8 mm x 3.6mm</li></ul><p>Examples of uses :</p><p>Manufacturer: World Famous Electronis llc</p><p>Reference : MFREQCARD</p>>

<MFREQCARD>

<<p>Measure the heartbeat of athletes with this Grove pulse sensor.</p><ul><li>Based on a signal reception module and an ear clip, it offers high sensitivity.</li><li>Easy to use thanks to Grove connectivity</li><li>Requires a card extension: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Module dimensions:</li><li> Case: 49mm x 27mm x 14mm</li><li> Cable clip: 120 cm</li><li>Weight :</li></ul><p>Examples of uses :</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Ear-clip_Heart_Rate_Sensor/'>https://wiki.seeedstudio.com/Grove-Ear-clip_Heart_Rate_Sensor/</a>)</p><p>Reference : 101020033</p>>

<101020033>

<<p>Amplify your I2C signal from a thermocouple with this Grove I2C amplifier.</p><ul><li>Based on the MCP9600 module, it converts a thermocouple to a digital output using the I2C protocol.</li><li>Designed to work with a K-type thermocouple.</li><li>Easy to use thanks to Grove connectic</li><li>Requires an extension card: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Module dimensions: 40mm x 20mm x 18mm</li><li>Weight: 4.8g</li></ul><p>Examples of use :</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-I2C_Thermocouple_Amplifier-MCP9600/'>https://wiki.seeedstudio.com/Grove-I2C_Thermocouple_Amplifier-MCP9600/</a>)</p><p>Reference: 11003</p>>

<101020594>

<<p>Connect a Grove cable and access the 4 cables.</p><ul><li>Access all 4 pins of the Grove connector on a screw terminal block.</li><li>Easy to use thanks to the Grove connector</li><li>Requires a card extension: Shield Grove (#categorie-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Terminal block pitch: 3.5mm</li><li>Module dimensions: 20mm x 20mm x13mm</li><li>Wire diameter: 30 to 20AWG wire</li><li>Weight: 10g</li></ul><p>Examples of uses: Connecting various sensors to a Grove Shield</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-I2C_Thermocouple_Amplifier-MCP9600/'>https://wiki.seeedstudio.com/Grove-I2C_Thermocouple_Amplifier-MCP9600/</a>)</p><p>Reference: 103020007</p>>

<103020007>

<<p>Detect an object with the Grove Time of Flight distance sensor.</p><ul><li>Based on a VL53L0X module, it measures distance with the Time-Of-Flight method (infrared pulses) which offers an accurate measurement</li><li>Easy to use thanks to Grove connectivity</li><li>Requires an extension card: Shield Grove (#category-14);</li><li>Sensor compatible with any card from 3.3 to 5V;</li><li>Detection range: 3 cm to 1m</li><li>Maximum absolute measurement: 2m</li><li>Resolution: 1mm</li><li>Detection angle: 25°.</li><li>Wavelength: 940 nm</li><li>Module size: 20mm x 20mm x 11mm</li><li>Weight: 7.8g</li></ul><p>Examples of uses: Laser rangefinder,...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Time_of_Flight_Distance_Sensor-VL53L0X/'>https://wiki.seeedstudio.com/Grove-Time_of_Flight_Distance_Sensor-VL53L0X/</a>)</p><p>Reference : 101020532</p>>

<101020532>

<>

<OPTOTHINGZ>

<>

<101020193>

<<p>Put your projects in motion with this Grove miniature servo motor.</p><ul><li> Servomotor with servo arms and screws.</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Torque :</li><li> 1.5 Kg.cm at 4.8V</li><li> 1.8 Kg.cm at 6.0V</li><li> No load speed :</li><li> 62.5 rpm at 4.8V</li><li> 83.3 rpm at 6.0V</li><li> Module dimensions: 32mm x 11mm x 24mm</li><li> Weight: 8.5g</li></ul><p>Examples of use : Robotic arm, automatic barrier, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Servo/'>https://wiki.seeedstudio.com/Grove-Servo/</a>)</p><p>Reference : 316010005</p>>

<316010005>

<<p>Set your projects in motion with this miniature servo motor.</p><ul><li> Continuous rotation miniature servo motor</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Torque :</li><li> 1.3 Kg.cm at 4.8V</li><li> 1.5 Kg.cm at 6.0V</li><li> No load speed :</li><li> 110 rpm at 4.8V</li><li> 130 rpm at 6.0V</li><li> Module dimensions: 22.5mm x 12.1mm x 27.7mm</li><li> Weight: 9g</li></ul><p>Examples of use: Robot wheels</p><p>Manufacturer: FeeTech</p><p>Reference: FS90R</p>>

<FS90R>

<<p>Customize your projects with this Access:bit gate.</p><ul><li> Based on a servomotor, an on-off switch, a AAA battery coupler and a buzzer.</li><li> Module compatible with the micro:bit card</li><li> Easy to use, the card is fixed with 5 screws and nuts on the module.</li><li> Module dimensions: 125mm x 89mm x30mm</li></ul><p>Screws and nuts included.</p><p>Examples of use : Automatic barrier</p><p>Manufacturer : Kitronik</p><p>Reference : ACCESSBIT</p>>

<ACCESSBIT>

<<p>Animate your robotic arm with this 3 servomotors kit for micro:bit.</p><ul><li> Module compatible with the micro:bit card</li><li> Contains an adapter for micro:bit card, 3 servomotors 9g, support for 4 AA batteries (not included)</li><li> Easy to use, the card is connected with alligator clips</li></ul><p>AA batteries not included</p><p>Examples of use : Robotic arm,...</p><p>Manufacturer: MonkMakes</p><p>Reference : SKU00075</p>>

<SKU00075>

<<p>Put your projects in motion with this miniature micro:bit board servo.</p><ul><li>Servomotor equipped with spreaders and screws.</li><li>Very easy to use thanks to the crocodile clips</li><li>Sensor compatible with any micro:bit V1 or V2 board</li><li>Couple :</li><li>1.5 Kg.cm at 6V</li><li>360° rotation</li><li>Module dimensions: 30mm x 12mm x 22mm</li><li>Weight: 10g</li></ul><p>Examples of uses: Robotic arm, automatic barrier, etc.</p><p>Manufacturer : Kitronik</p>>

<25111K>

<<p>Grove - I2C Motor Driver(L298P) is a common-use motor driver for stepping motor and servo motor. It embeds an STM32 chip for burning the code to control the motor driver.</p><p>2-channel output: able to support 1A current on each channel, max 2A current; Need 6V-12V DC voltage input.</p><p>User LED: green LED on for the clockwise direction and red LED on for the anti-clockwise direction for each channel.<br><br><hr>This product is compatible with the following card(s) : <br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<105020093>

<<p>Control a switch electronically with this Grove relay module.</p><ul><li> Electronic switch</li><li> Easy to use thanks to Grove connectors</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3V to 5V</li><li> Switching capacity: 10 A / 30 V</li><li> Operating temperature: 0°C to +45°C</li><li> Module dimensions: 42mm x 24mm x 20mm</li></ul><p>Examples of use : Automatic water pump, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Relay/'>https://wiki.seeedstudio.com/Grove-Relay/</a>)</p><p>Reference : 103020005</p>>

<103020005>

<<p>MOSFET module grove compatible, which can power motors, or other components up to 15V.</p>>

<103020008>

<<p>A first step in building your watering system with this water pump.</p><ul><li> Lightweight, small size, high efficiency, low consumption and low noise water pump.</li><li> Cold water pump only</li><li> Sensor compatible with any card from 3.3V to 5V</li><li> Flow rate: 80 to 120 liter/hour.</li><li> Dimensions of the module: Ø24mm x 45 mm</li><li> Flexible hose supplied</li><li> Length of the hose: 25 cm</li></ul><p>ATTENTION:</p><ul><li> In order to avoid any risk of short-circuit, immerse only the waterproof part provided for this purpose.</li><li> Do not use when empty.</li></ul><p>Examples of use : Automatic water pump, ...</p><p>Manufacturer : Vittascience</p><p>Reference : PPMB00117</p>>

<PPMB00117>

<<p>Build your own watering system with this automatic watering pack.</p><ul><li> Composed of a water pump, a Grove MOSFET module and a battery box.</li><li> Easy to use thanks to the Grove connectors</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3V to 5V</li><li> Pump flow rate: 80 to 120 liters/hour.</li><li> Pump dimensions: Ø24mm x 45 mm</li><li> Flexible hose supplied</li><li> Length of the hose: 25 cm</li></ul><p>ATTENTION :</p><ul><li> In order to avoid any risk of short circuit, immerse only the waterproof part provided for this purpose.</li><li> Do not use when empty.</li></ul><p>Examples of use : Automatic watering, ...</p><p>Manufacturer : Vittascience (<a href='https://wiki.seeedstudio.com/Grove-MOSFET/'>https://wiki.seeedstudio.com/Grove-MOSFET/</a>)</p><p>Reference : 3760327670221</p>>

<3760327670221>

<<p>Need some air? This Grove fan module is for you.</p><ul><li> Control board based on an ATMega168</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any 5V card</li><li> Foam fan blades</li><li> Module dimensions :</li><li> Fan: Ø70 mm x 16 mm</li><li> Control board: 42 mm x 24 mm x 10 mm</li></ul><p>Examples of use : Desk fan, ...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Mini_Fan/'>https://wiki.seeedstudio.com/Grove-Mini_Fan/</a>)</p><p>Reference : 108020021</p>>

<108020021>

<<p>Make your creations vibrate with the Grove haptic engine.</p><ul><li> Based on a DVR2605L, generate up to 123 different vibration effects</li><li> Easy to use thanks to Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3V to 5V</li><li> Module dimensions: 130 mm x 90 mm x 10 mm</li><li> Weight: 12g</li></ul><p>Examples of uses : Alarm vibrator, ...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Haptic_Motor/'>https://wiki.seeedstudio.com/Grove-Haptic_Motor/</a>)</p><p>Reference : 105020011</p>>

<105020011>

<<p>Make your own humidifier with this Grove ultrasonic water atomizer module.</p><ul><li> Based on an ultrasonic transducer</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Frequency: 105±5kHz</li><li> Output voltage: 65±5V</li><li> Module size: 140mm x 85mm x 11.6mm</li><li> Weight: 13g</li></ul><p>Examples of uses : Fogger, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Water_Atomization/'>https://wiki.seeedstudio.com/Grove-Water_Atomization/</a>)</p><p>Reference : 101020090</p>>

<101020090>

<<p>Connect a magnet to electricity with this Grove electromagnet.</p><ul><li> The magnetic field is created by the electric current and can lift up to 1 Kg</li><li> Easy to use thanks to the Grove connector</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any 5V card</li><li> Holding force: 1 kg maximum</li><li> Module dimensions: 42mm x 24mm x 19mm</li><li> Weight: 34g</li></ul><p>Examples of use : Automatic door, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Electromagnet/'>https://wiki.seeedstudio.com/Grove-Electromagnet/</a>)</p><p>Reference : 101020073</p>>

<101020073>

<<p>Make some noise! That's what the Grove Buzzer module is for.</p><ul><li> Based on a piezo buzzer</li><li> In digital output, it emits a sound when the output is 1</li><li> In analog output, the tone can be modulated according to the current.</li><li> Easy to use thanks to the Grove connector</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3V to 5V</li><li> Output sound: > 85 dB</li><li> Resonance frequency: 2300±300Hz</li><li> Module dimensions: 20mm x 20mm x 19mm</li><li> Weight: 10g</li></ul><p>Examples of uses : Alarm, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Buzzer/'>https://wiki.seeedstudio.com/Grove-Buzzer/</a>)</p><p>Reference : 107020000</p>>

<107020000>

<<p>Music at your fingertips with the Grove speaker.</p><ul><li> This speaker module can generate different sounds depending on the input frequency.</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Gain: 46 dB</li><li> Maximum frequency: 20kHz</li><li> Adjustable volume by potentiometer</li><li> Resonance frequency : 2300±300Hz</li><li> Module dimensions: 20mm x 20mm x 19mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Mini speaker, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Speaker/'>https://wiki.seeedstudio.com/Grove-Speaker/</a>)</p><p>Reference : 107020001</p>>

<107020001>

<<p>Connect a male MP3 jack to your project with this Grove MP3 module.</p><ul><li> Based on the KT403A, it allows the reading of audio files in MP3, WAV, ...</li><li> Equipped with an SD card support</li><li> Easy to use thanks to Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Sampling frequencies: 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 (KHz)</li><li> Output: 24-bit DAC 90 dB maximum</li><li> Supported formats: MP3, WMV, WAV.</li><li> Supported SD cards : FAT16, FAT32.</li><li> Maximum SD card size: 8 GB</li><li> Module size : 55mm x 55mm x 10mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Mini synthesizer, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-MP3_v2.0/'>https://wiki.seeedstudio.com/Grove-MP3_v2.0/</a>)</p><p>Reference : 107020069</p>>

<107020069>

<<p>Display your measurements on this 32-character Grove LCD.</p><ul><li> Composed of 2 lines of 16 black characters on a yellow backlit background.</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3 to 5V;</li><li> Module dimensions: 80mm x 40mm x13mm</li><li> Weight: 42g</li></ul><p>Examples of uses : Display real-time measurements,...</p><p>Manufacturer: Seeed Studio Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-16x2_LCD_Series/'>https://wiki.seeedstudio.com/Grove-16x2_LCD_Series/</a>)</p><p>Reference : 104020113</p>>

<104020113>

<<p>Display your measurements on this Grove 32-character RBG LCD.</p><ul><li> Composed of 2 lines of 16 RBG characters offering a multitude of colors</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card;</li><li> Module dimensions: 84mm x 45mm x13mm</li><li> Weight: 42g</li></ul><p>Examples of uses : Display real-time measurements,...</p><p>Manufacturer: Seeed Studio Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-LCD_RGB_Backlight/'>https://wiki.seeedstudio.com/Grove-LCD_RGB_Backlight/</a>)</p><p>Reference : 104030001</p>>

<104030001>

<<p>Display your measurements on this Grove OLED display.</p><ul><li> Monochrome OLED module with 128 x 64 pixels</li><li> High brightness, good contrast, and easy to use thanks to Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14)</li><li> Sensor compatible with any card from 3.3 to 5V;</li><li> Module dimensions: 42mm x 24mm x 9mm</li><li> Weight: 10g</li></ul><p>Examples of uses : Display real-time measurements,...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-OLED_Display_0.96inch/'>https://wiki.seeedstudio.com/Grove-OLED_Display_0.96inch/</a>)</p><p>Reference : 104030008</p>>

<104030008>

<<p>Display a number with this 4 digit display.</p><ul><li> Display a number with up to 4 digits in red color</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V;</li><li> 8 levels of brightness</li><li> Format: 00:00</li><li> Module dimensions: 42mm x 24mm x 14mm</li><li> Weight: 7g</li></ul><p>Examples of uses : Displaying measurements in real time,...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-4-Digit_Display/'>https://wiki.seeedstudio.com/Grove-4-Digit_Display/</a>)</p><p>Reference : 104030003</p>>

<104030003>

<<p>Create an electronic gauge with the Grove LED Gauge Module.</p><ul><li> Composed of 10 LED segments: 1 red, 1 yellow and 8 green and based on the MY9221 controller</li><li> Easy to use with Grove connectors</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V;</li><li> Module dimensions: 40mm x 20mm x 20mm</li><li> Weight: 12g</li></ul><p>Examples of uses : Display battery level, air quality measurement scale, ...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-LED_Bar/'>https://wiki.seeedstudio.com/Grove-LED_Bar/</a>)</p><p>Reference : 104020006</p>>

<104020006>

<<p>Light up your projects with Grove LED module.</p><ul><li> Composed of 4 LEDs (1 red, 1 green, 1 blue, 1 white)</li><li> Easy to use: the LED plugs into a connector provided.</li><li> Easy to use thanks to the Grove connector</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Adjustable brightness</li><li> Module dimensions: 20mm x 20mm x 20mm</li><li> Weight: 12g</li></ul><p>Examples of use : Display the status of a binary variable, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Red_LED/'>https://wiki.seeedstudio.com/Grove-Red_LED/</a>)</p><p>Reference : 104020228</p>>

<104020228>

<<p>Light up your projects in color with the Grove RGB LED module.</p><ul><li> Adjustable color by 3 potentiometers on the circuit board</li><li> Easy to use: the LED plugs into a connector provided.</li><li> Easy to use thanks to the Grove connector</li><li> Requires a card extension: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Adjustable resistance: 1 kΩ</li><li> Module dimensions: 20mm x 20mm x 30mm</li><li> Weight: 7g</li></ul><p>Examples of use : Display the status of a binary variable, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Variable_Color_LED/'>https://wiki.seeedstudio.com/Grove-Variable_Color_LED/</a>)</p><p>Reference : 101020472</p>>

<101020472>

<<p>Light up your projects in color with the Neopixel Grove RGB LED module.</p><ul><li> Based on the WS2813 Mini, it is possible to have up to 16 million different colors</li><li> Easy to use with Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Frequency: 2kHz</li><li> Module dimensions: 20mm x 20mm</li><li> Weight: 7g</li></ul><p>Examples of uses : Display a color, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Chainable_RGB_LED/'>https://wiki.seeedstudio.com/Grove-Chainable_RGB_LED/</a>)</p><p>Reference : 104020169</p>>

<104020169>

<<p>Customize your projects with this Neopixel Grove 24 LED ring.</p><ul><li> Based on the WS2813 module, the ring can work even if some LEDs are burnt out. However, if 2 adjacent LEDs are out, the whole ring will not work.</li><li> Easy to use thanks to the Grove connector</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Frequency: 2kHz</li><li> 16 million different colors</li><li> Module dimensions: Ø70mm x 2.5mm (without Grove connectivity)</li></ul><p>Examples of uses: Light game</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-LED_ring/'>https://wiki.seeedstudio.com/Grove-LED_ring/</a>)</p><p>Reference : 104020168</p>>

<104020168>

<<p>Need more light? Light up your projects with the Neopixel 30 LED strip light.</p><ul><li> 1m long waterproof RGB LED strip light based on WS2813 LEDs</li><li> Easy to use thanks to the Grove connector</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any 5V card</li><li> Waterproof protection: IP65 (except grove connector)</li><li> 16 million different colors per LED</li><li> 256 levels of brightness</li><li> Module dimensions: 1000mm x 12mm x 4mm</li><li> Weight: 41g</li></ul><p>Examples of uses : Light game</p><p>Manufacturer: Seeed Studio (No wiki)</p><p>Reference: 104020108</p>>

<104020108>

<<p>Need even more light? Light up your projects with the Neopixel 30 LED strip light.</p><ul><li> 150 LED waterproof RGB strip light with 5m length based on WS2813 LEDs</li><li> Easy to use with Grove connectors</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Waterproof protection: IP65 (except grove connector)</li><li> 16 million different colors per LED</li><li> 256 levels of brightness</li><li> Module dimensions: 5000mm x 12mm x 4mm</li><li> Weight: 205g</li></ul><p>Examples of uses : Light game</p><p>Manufacturer: Seeed Studio</p><p>Reference: WS2812B5M30LW67</p>>

<WS2812B5M30LW67>

<<p>Customize your projects with this Grove 8*8 RGB LED array.</p><ul><li> The 8*8 RGB LED matrix displays 64 pixels with 255 colors each, offering almost infinite combination possibilities</li><li> Easy to use thanks to Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> 255 colors per pixel</li><li> Module dimensions: 20mm x 20mm x 13mm</li><li> Weight: 17.3g</li></ul><p>Examples of use : Light game</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-RGB_LED_Matrix_w-Driver/'>https://wiki.seeedstudio.com/Grove-RGB_LED_Matrix_w-Driver/</a>)</p><p>Reference : 105020073</p>>

<105020073>

<<p>Customize your projects with this Grove red 8*8 LED array.</p><ul><li> 8*8 red LED matrix displays 64 pixels</li><li> Easy to use with Grove connectivity</li><li> Requires a card extension: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> 255 colors per pixel</li><li> Module dimensions: 40mm x 40mm x 21mm</li><li> Weight: 17.3g</li></ul><p>Examples of use : Light game</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Red_LED_Matrix_w_Driver/'>https://wiki.seeedstudio.com/Grove-Red_LED_Matrix_w_Driver/</a>)</p><p>Reference : 104020089</p>>

<104020089>

<<p>Customize your projects with this Lamp:bit floor lamp.</p><ul><li> Composed of a led and a phototransistor on the top.</li><li> Module compatible with the micro:bit card</li><li> Easy to use, the card is fixed with 5 screws and nuts on the module.</li><li> Module dimensions: 135mm x 76mm x 42mm</li></ul><p>Screws and nuts included.</p><p>Examples of use : Automatic lighting</p><p>Manufacturer : Kitronik</p><p>Reference : LAMPBIT</p>>

<LAMPBIT>

<<p>Customize your projects with this Lamp:bit floor lamp.</p><ul><li> Composed of 3 LEDs (1 red, 1 yellow, 1 green)</li><li> Module compatible with the micro:bit card</li><li> Easy to use, the card is fixed with 5 screws and nuts on the module.</li><li> Module dimensions: 120mm x 38mm x 15mm</li></ul><p>Screws and nuts included.</p><p>Examples of use: Traffic light</p><p>Manufacturer: Kitronik</p><p>Reference : STOPBIT</p>>

<STOPBIT>

<<p>Based on the WS2813 module, the ring can continue to function even if some LEDs fail. However, if two adjacent LEDs fail, the entire ring will stop working.</p><p>Easy to use thanks to the Grove connector</p><p>Requires an expansion board: Grove Shield (#category-14)</p><p>Sensor compatible with any 3.3V to 5V board</p><p>Frequency: 2kHz</p><p>16 million different colors</p><p>Module dimensions: Ø70mm x 2.5mm (excluding the Grove connector)</p><p>Example uses: Light-based games</p>>

<104020128>

<<p>Measure the amount of fine particles in the air with this Grove sensor.</p><ul><li>Measure fine particles larger than 1μm in diameter</li><li>Easy to use thanks to Grove connectivity</li><li>Requires a card extension: Shield Grove (#category-14);</li><li>Sensor compatible with any 5V card;</li><li>Measuring range: 0 to 28000 particles/liter</li><li>Range of use: 0°C to +45°C</li><li>Module dimensions: 59mm x 45mm x 22mm</li><li>Weight :</li></ul><p>CAUTION: the sensor must remain stable and long in operation to give interesting measurements.</p><p>Examples of application: Air quality sensor, smoke detector, weather station ...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Dust_Sensor/'>https://wiki.seeedstudio.com/Grove-Dust_Sensor/</a>)</p><p>Reference : 101020012</p>>

<101020012>

<<p>Communicate by radio with the NRF24L01 radio module.</p><ul><li> Allows you to transmit data from one card to another. In flight, this allows you to have live data from the ground.</li><li> Sensor compatible with any card from 3.3V to 5 V</li><li> Frequency: 2.5GHz</li><li> Dimensions of the module: 40 mm x 20 mm x 12 mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Connected objects,...</p><p>Manufacturer: Seeed Studio Seeed Studio</p><p>Reference : 317990024</p>>

<317990024>

<<p>Push Button Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<111020000>

<<p>LED Button Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<111020045>

<<p>Touch Sensor Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<101020037>

<<p>Touch Keypad Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<101020636>

<<p>Thumb Joystick Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<101020028>

<<p>Rotary Angle Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<111020001>

<<p>Slide Potentiometer Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<101020036>

<<p>Switch Grove<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<101020004>

<<p>Grove module limit switch with blade.<br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<102020143>

<<p>Potentiometer module compatible with Grove connectors, equipped with a 10 kΩ resistor, outputs an analog signal.</p>>

<101020048>

<<p>Record your data to a microSD card with the OpenLog module.</p><ul><li> Based on sdfatlib, simply power up this device and it will start recording serial data at 9600 bps.</li><li> Sensor compatible with any 5V card</li><li> Supports FAT16 and FAT32 microSD cards (tested up to 16GB).</li><li> Baud rate: up to 115200 bps</li></ul><p>Comes with a 128mb microSD card.</p><p>Examples of uses: Backup of measurements of a connector, ...</p><p>Manufacturer : Vittascience</p><p>Reference : OPENLOG</p>>

<DEV13955>

<<p>Save your data from your Arduino board to a microSD card with the SPI microSD module.</p><ul><li> Based on sdfatlib simply power up this device and it will start recording serial data at 9600 bps.</li><li> Sensor compatible with any 5V card</li><li> Supports FAT16 and FAT32 microSD cards (tested up to 16GB).</li><li> Baud rate: up to 115200 bps</li></ul><p>Comes with a 128mb microSD card.</p><p>Examples of uses: Backup of measurements of a connector, ...</p><p>Manufacturer: CATALEX (<a href='https://circuitstate.com/tutorials/interfacing-catalex-micro-sd-card-module-with-arduino/'>https://circuitstate.com/tutorials/interfacing-catalex-micro-sd-card-module-with-arduino/</a>)</p><p>Reference : SDSPI</p>>

<SDSPI>

<<p>Connect your projects with Bluetooth with this Grove series Bluetooth module.</p><ul><li> Based on a BC417, it allows you to communicate with your microcontroller projects via Bluetooth</li><li> Easy to use thanks to the Grove connectivity</li><li> Requires a card extension: Shield Grove (#categorie-14);</li><li> Sensor compatible with any 5V card</li><li> Bluetooth: V2.0 + EDR 3 Mbps modulation</li><li> Sensitivity: -80 dBm</li><li> RF transmission power: +4 dBm max</li><li> Adjustable Baud rate</li><li> Data rate: 2 Mbps</li><li> Module dimensions: 40mm x 20mm x 13mm</li><li> Weight: 10g</li></ul><p>Note: The Bluetooth module may not be compatible with all Bluetooth devices.</p><p>Examples of uses: Bluetooth speaker, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Serial_Bluetooth_v3.0/'>https://wiki.seeedstudio.com/Grove-Serial_Bluetooth_v3.0/</a>)</p><p>Reference : 113020008</p>>

<113020008>

<<p>Connect your projects in Bluetooth with this Bluetooth HC05 module.</p><ul><li> Based on a CSR Bluecore 04-External, it allows you to communicate in Bluetooth with your microcontroller projects</li><li> Sensor compatible with any 5V card</li><li> Bluetooth : V2.0 + EDR 3 Mbps modulation</li><li> Range: 10 m</li><li> Sensitivity: -80 dBm</li><li> RF transmission power: +4 dBm max</li><li> Baud rate: 4800 to 1382400 bauds</li><li> Data rate: 2 Mbps</li><li> Integrated antenna: 2.4 GHz</li><li> Module dimensions: 35 mm x 16 mm x 2 mm</li><li> Weight: 10g</li></ul><p>Comes with a 6-pin patch cord</p><p>Note: Module not compatible with an iOS device (iPhone, iPad, etc).</p><p>Examples of uses: Bluetooth speaker, ...</p><p>Manufacturer: AZ-Delivery</p><p>Reference : HC05</p>>

<HC05>

<<p>Connect your projects with Bluetooth with this HM10 Bluetooth module.</p><ul><li> Based on a CC2540 it allows you to communicate with your microcontroller projects via Bluetooth</li><li> Sensor compatible with any 5V card</li><li> Bluetooth: V2.0 + EDR 3 Mbps modulation</li><li> Sensitivity: -80 dBm</li><li> RF transmission power: +4 dBm max</li><li> Data rate: 2 Mbps</li><li> Module dimensions: 27mm x 13mm x 2mm</li><li> Weight: 10g</li></ul><p>Delivered with a 4-pin connection cable</p><p>Examples of uses: Bluetooth speaker, ...</p><p>Manufacturer : AZ-Delivery</p><p>Reference : HM-10</p>>

<HM10>

<<p>Control your infrared projects with this NEC infrared remote control.</p><ul><li> Miniature remote control</li><li> Power supply: 3 VDC via CR2032 battery included</li><li> 21 buttons</li><li> Frequency: 38 kHz</li><li> Wavelength: 940 nm</li><li> Module dimensions: 87 mm x 40 mm x 7 mm</li><li> Weight: 12g</li></ul><p>Examples of uses: Control a robot, ...</p><p>Manufacturer :</p><p>Reference: IRC01</p>>

<IRC01>

<<p>Transmit data with infrared with this Grove infrared transmitter.</p><ul><li> Based on an IR led, it allows the sending of data in infrared</li><li> Compatible with the Grove infrared receiver</li><li> Easy to use thanks to Grove connectivity</li><li> Requires a card extension: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Wavelength: 940 nm</li><li> Range: 10 m</li><li> Module dimensions: 20mm x 20mm x 13mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Infrared remote controlled robot, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Infrared_Emitter/'>https://wiki.seeedstudio.com/Grove-Infrared_Emitter/</a>)</p><p>Reference : 101020026</p>>

<101020026>

<<p>Receive data with infrared with this Grove infrared receiver.</p><ul><li> Based on a demodulator, it allows the reception of data in infrared</li><li> Compatible with the Grove infrared transmitter</li><li> Easy to use thanks to the Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Demodulator: 38 kHz</li><li> Range: 10 m</li><li> Module dimensions: 20mm x 20mm x 13mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Infrared remote controlled robot, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-Infrared_Receiver/'>https://wiki.seeedstudio.com/Grove-Infrared_Receiver/</a>)</p><p>Reference : 101020016</p>>

<101020016>

<<p>Your position in real time with the Grove GPS receiver.</p><ul><li> Based on 22 tracking channels and 66 acquisition channels, it allows you to know your position in real time</li><li> Easy to use with Grove connectivity</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Sensitivity: -160 dBm</li><li> Supported protocols: NMEA and U-blox 6</li><li> Adjustable Baud rate</li><li> Module dimensions :</li><li> printed circuit: 40 mm x 20 mm x 13 mm</li><li> GPS sensor: 15 mm x 15 mm x 7 mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Navigation, tracking of objects, ...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-GPS/'>https://wiki.seeedstudio.com/Grove-GPS/</a>)</p><p>Reference : 113020003</p>>

<113020003>

<<p>Real time clock with the Grove RTC.</p><ul><li> Based on a DS1307, it gives the date and time in 12h or 24h format</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Sensor compatible with any card from 3.3 to 5V</li><li> Format: 24h or 12h with AM/PM display</li><li> Backup: CR1225 battery (not included)</li><li> Leap years are taken into account until 2100</li><li> Module dimensions: 40 mm x 20 mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Clock connected,...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-RTC/'>https://wiki.seeedstudio.com/Grove-RTC/</a>)</p><p>Reference : 101020013</p>>

<101020013>

<<p>Recognize your NFC cards or tags with this Grove NFC reader.</p><ul><li> Based on the PN532 circuit from NXP, it can read NFC tags and RFID badges</li><li> Easy to use thanks to Grove connectivity</li><li> Requires a card extension: Shield Grove (#categorie-14);</li><li> Sensor compatible with any 3.3V card</li><li> Supported protocols: ISO14443 Type A and Type B .</li><li> Module dimensions :</li><li> printed circuit: 42 mm x 24 mm x 10 mm</li><li> antenna: 28 mm x 30 mm</li><li> Weight: 10g</li></ul><p>Examples of use : Door secured by badge,...</p><p>Note: The NFC (Near Field Communication) allows to establish a contactless link at short distance. This technology is derived from RFID technology according to ECMA-340 and ISO/IEC 18092.</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove_NFC/'>https://wiki.seeedstudio.com/Grove_NFC/</a>)</p><p>Reference : 113020006</p>>

<113020006>

<<p>Recognize your RFID cards or tags with this Grove RFID reader.</p><ul><li> It allows wireless detection up to a distance of 7 cm</li><li> Easy to use thanks to Grove connectivity</li><li> Requires a card extension: Grove Shield (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Range: 7cm</li><li> Module dimensions :</li><li> PCB: 40mm x 20mm x 15mm</li><li> antenna: 43 mm x 33 mm x 3 mm</li><li> Weight: 10g</li></ul><p>Examples of use : Door secured by badge,...</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-125KHz_RFID_Reader/'>https://wiki.seeedstudio.com/Grove-125KHz_RFID_Reader/</a>)</p><p>Reference : 113020002</p>>

<113020002>

<<p>Communicate by radio with the Grove 433 MHz radio module.</p><ul><li> Consisting of a transmitter and a receiver, it allows data transmission between two cards</li><li> Easy to use thanks to Grove connectors</li><li> Requires a card extension: Shield Grove (#category-14);</li><li> Sensor compatible with any 5V card</li><li> Transmitter: 3 to 12V</li><li> Receiver: 5V</li><li> Range: 30 m</li><li> Frequency: 433 Mhz</li><li> Modulation: ASK</li><li> Dimensions of the module :</li><li> transmitter: 23 mm x 20 mm x 12 mm</li><li> Receiver: 42 mm x 24 mm x 12 mm</li><li> Weight: 10g</li></ul><p>Examples of uses: Communication,...</p><p>Manufacturer : Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-433MHz_Simple_RF_Link_Kit/'>https://wiki.seeedstudio.com/Grove-433MHz_Simple_RF_Link_Kit/</a>)</p><p>Reference : 113060000</p>>

<113060000>

<<p> Grove LoRa module based on an STM32WLE5JC chip. </p> <a href="https://fr.vittascience.com/vittamap/experimentDetails?id=200">Test experiment carried out by Vittascience to present the LoRa module and the 'Connected Measuring Station' kit.</a> Discover real-time data on air temperature, quality and humidity. <a href="https://fr.vittascience.com/shop/311/station-de-mesures-connectee---version-nucleo-l476> Link to "Connected measuring station" kit</a>>

<113020091>

<<p>Recognize your NFC cards or tags with this Grove NFC reader.</p><ul><li> Based on the M24SR64-Y chip, it can read NFC tags and RFID badges</li><li> Easy to use thanks to Grove connectivity</li><li> Sensor compatible with any 3.3 V card</li><li> Antenna frequency: 13.56MHz</li><li> Module dimensions :</li><li> antenna: 14mm x 14mm</li><li> Weight: 10g</li></ul><p>Examples of use : Door secured by badge,...</p><p>Note: The NFC (Near Field Communication) allows to establish a contactless link at short distance. This technology is derived from RFID technology according to ECMA-340 and ISO/IEC 18092.</p><p>Manufacturer: ST</p><p>Reference : ANT7-T-M24SR64</p>>

<ANT7TM24SR64>

<<p>Connected objects at your fingertips with the Grove WiFi module.</p><ul><li> Based on an ESP8285, the module is a WiFi transmitter / receiver</li><li> Easy to use thanks to Grove connectivity</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3V to 5 V</li><li> WiFi features:</li><li> 802.11 b/g/n 2.4GHz protocol</li><li> WiFi Direct (P2P) and Soft-AP (access sharing)</li><li> Security: WEP, WPA/WPA2, TKIP, AES, and WAPI</li><li> Internet Protocol: TCP/IP</li><li> Module size: 25mm x 20mm</li><li> Weight: 9g</li></ul><p>Examples of uses: Connected objects,.</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-UART_Wifi_V2/'>https://wiki.seeedstudio.com/Grove-UART_Wifi_V2/</a>)</p><p>Reference : 113020011</p>>

<113020011>

<<p>Protect your micro:bit card with this soft, colorful silicone protector.</p><ul><li>Soft and supple touch thanks to the silicone</li><li>Accessible connections from the card with the cutouts provided. Good visibility of the LEDs of the matrix.</li><li>Compatible with micro:bit V1 and V2 cards.</li><li>Module dimensions: (micro:bit size)</li><li>Weight: 11g</li></ul><p>Manufacturer: KittenBot</p><p>Reference : KITTENBLEU</p>>

<KITTENBLEU>

<<p>Protect your micro:bit card with this transparent and rigid protection.</p><ul><li>Accessible connections of the card with the cutouts provided.</li><li>Good visibility of the LEDs of the matrix.</li><li>Assembled with nylon screws and nuts</li><li>Compatible with micro:bit V1 and V2 cards.</li><li>Module dimensions: (micro:bit size)</li><li>Weight: 11g</li></ul><p>Product composition:</p><p>4 x M3 nylon screws</p><p>4 x M3 nylon nuts</p><p>1 x back plate</p><p>1 x front plate</p><p>2 x intermediate plates</p><p>Manufacturer: Kitronik</p><p>Reference : MIPRO</p>>

<MIPRO>

<<p>Connect up to 3 grove cables with the Grove I2C power strip.</p><ul><li> It allows you to multiply your outlets up to 3 additional modules</li><li> Easy to use thanks to the Grove connector</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V;</li><li> Operating range: -25°C to +85°C</li><li> Module dimensions: 40mm x 20mm x 15mm</li><li> Weight :</li></ul><p>Grove cable supplied</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-I2C_Hub/'>https://wiki.seeedstudio.com/Grove-I2C_Hub/</a>)</p><p>Reference : 103020006</p>>

<103020006>

<<p>Connect up to 5 grove cables with the Grove I2C power strip.</p><ul><li> It allows you to multiply your outlets up to 3 additional modules</li><li> Easy to use thanks to the Grove connector</li><li> Requires an extension card: Shield Grove (#category-14);</li><li> Sensor compatible with any card from 3.3 to 5V;</li><li> Operating range: -25°C to +85°C</li><li> Module dimensions: 40mm x 20mm x 15mm</li><li> Weight:</li></ul><p>Grove cable supplied</p><p>Manufacturer: Seeed Studio (<a href='https://wiki.seeedstudio.com/Grove-I2C-Hub-6Port/'>https://wiki.seeedstudio.com/Grove-I2C-Hub-6Port/</a>)</p><p>Reference: 103020272</p>>

<103020272>

<<p>Connect your micro:bit card to other accessories and everyday objects (aluminum foil, spoon, nail) to have fun with programming.</p><ul><li> Easy to use thanks to the protection on the clamps</li><li> Assorted colors</li><li> Good grip on the card</li><li> Length: 50 cm</li><li> Weight: 13g</li></ul><p>Examples of application : humidity tester - door alarm ...</p><p>Manufacturer : Vittascience</p><p>Reference : LOT10CROCO</p>>

<LOT10CROCO>

<<p>Connect sensors to your Grove Shield with this Grove cable pack.</p><ul><li> Lot of 5 Grove to Grove cables</li><li> Easy to use thanks to Grove connectors</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Length of a cable: 30 cm</li></ul><p>Manufacturer: Seeed Studio Seeed Studio</p><p>Reference : 110990040</p>>

<110990040>

<<p>Connect sensors to your Grove Shield with this pack of Grove cables!</p><ul><li> Lot of 5 Grove to Grove cables</li><li> Easy to use thanks to Grove connectors</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Length of a cable: 50 cm</li></ul><p>Manufacturer: Seeed Studio Seeed Studio</p><p>Reference : 110990038</p>>

<110990038>

<<p>Grove cable 1m long with polarizer. Sheathed cable for added strength.</p>>

<GROVE1M>

<<p>Grove cable 2m long with polarizer. Sheathed cable for added strength.</p>>

<GROVE2M>

<<p>Connect sensors to a Grove Shield with this Grove to Dupont female cable pack.</p><ul><li> Lot of 5 Grove to Dupont female cables</li><li> Easy to use thanks to the Grove connector</li><li> Dupont female end connects to a Grove Shield</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Length of a cable: 30 cm</li></ul><p>Manufacturer: Seeed Studio Seeed Studio</p><p>Reference: 110990028</p>>

<110990028>

<<p>Connect 2 servos with one Grove cable.</p><ul><li> Grove end connects to a Grove Shield</li><li> Dupont male ends connect to servo motors</li><li> Easy to use with Grove connectors</li><li> Requires an extension card: Shield Grove (#categorie-14);</li><li> Length of a cable: 20 cm</li></ul><p>Manufacturer: Seeed Studio Seeed Studio</p><p>Reference : 110990057</p>>

<110990057>

<<p>Connect Grove sensors to a prototyping board with this Grove to Dupont male cable pack.</p><ul><li> Lot of 5 Grove to Dupont male cables</li><li> Easy to use with Grove connectors</li><li> The Dupont male end connects to a prototyping board or directly to the outputs of a board (Arduino UNO, Wemos D1 R32, NUCLEO)</li><li> Length of a cable: 30 cm</li></ul><p>Manufacturer: Seeed Studio</p><p>Reference : 110990210</p>>

<110990210>

<<p>Charging module for micro:bit card, with solar cell (2 Vdc/160 mA) included.</p><p>Allows recharging of optional 3.7V LiPo battery.</p>>

<DFR0579>

<<p>3.7V 1000 mAh LiPo battery, compatible with solar charging module for micro:bit.</p><p>Includes overload, deep discharge and short circuit protection.</p>>

<PR523450>

<<p>Connect a display to your Raspberry Pi 4.</p><ul><li> Connectivity: HDMI and Micro HDMI</li><li> Cable length: 1 m</li></ul><p>Manufacturer: Raspberry Pi Raspberry Pi</p><p>Reference: HDMIPi4</p>>

<HDMIPi4>

<<p>Transfer your programs to your programmable card with this 1m long USB cable.</p><ul><li> Length 1m</li><li> Power and data transfer</li><li> Compatible with all microUSB format cards</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Reference: USB1M</p>>

<USB1M>

<<p>Transfer your programs to your Arduino Uno board with this USB cable.</p><ul><li> Braided cable for more solidity</li><li> Compatible with Arduino Uno and Mega boards</li><li> Length 30 cm</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Reference: USB30CMARD</p>>

<USB30CMARD>

<<p>Transfer programs created on your Texas Instruments TI-83 Premium CE Python Edition calculator to your micro:bit card.</p><ul><li> Flexible cable</li><li> Length 30 cm</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Texas Instruments</p><p>Reference: USB40TI</p>>

<USB40TI>

<<p>Power your micro:bit card with this battery box.</p><ul><li> Small size</li><li> Easy to use thanks to the integrated switch</li><li> JST socket for micro:bit card</li><li> Powered by 2 AAA batteries (not included)</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Vittascience</p><p>Reference : MBLOC3V</p><p>Remember to recycle your used batteries and small batteries by bringing them to a collection point (<a href='https://www.jerecyclemespiles.com'>https://www.jerecyclemespiles.com</a>)</p>>

<MBLOC3V>

<<p>Power your Arduino Uno board with a 9V battery.</p><ul><li> Flexible cable</li><li> Protected connector</li><li> For 9V batteries (INSERT VITTASCIENCE LINK)</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Reference : COP9V</p><p>Remember to recycle your used batteries and small batteries by bringing them to a collection point (<a href='https://www.jerecyclemespiles.com'>https://www.jerecyclemespiles.com</a>)</p>>

<COP9V>

<<p>Power your Arduino Uno board with this 9V battery.</p><ul><li> Technology : Saltine</li><li> Voltage : 9V</li><li> Minimum capacity : 310 mAh</li><li> Requires the connector for Arduino Uno board (INSERT LINK)</li><li> Module dimensions: 27mm x 17mm x 49mm</li><li> Weight: 37g</li></ul><p>Manufacturer: Microbatt</p><p>Reference : 5000394082991</p><p>Reminder of precautions for use:</p><ul><li>do not short-circuit or perforate (risk of explosion or fire)</li><li>do not expose to high temperatures</li><li>Respect local recycling regulations</li></ul><p>Remember to recycle your used batteries and small batteries by bringing them to a collection point (<a href='https://www.jerecyclemespiles.com'>https://www.jerecyclemespiles.com</a>)</p>>

<5000394082991>

<<p>Discover the RFID technology and have fun customizing the actions with your own badges.</p><ul><li> Set of 3 badges (red, yellow, blue) and 2 RFID cards</li><li> Easy to use, just scan the badge or card</li><li> Requires an RFID reader (<a href='https://fr.vittascience.com/shop/43/Lecteur-RFID-125kHz-Grove'>https://fr.vittascience.com/shop/43/Lecteur-RFID-125kHz-Grove</a>)</li><li> Works with 125kHz readers</li></ul><p>Manufacturer: Seeed Studio</p><p>Reference : 110990035</p>>

<110990035>

<<p>Câble USB 2m</p>>

<USB2M>

<<p>Simply program your electronic components with this prototyping board dedicated to the micro:bit board.</p><ul><li> Specific prototyping kit for micro:bit</li><li> Easy access to the different ports on the board</li><li> Includes:</li><li> 4 M3 pan head screws</li><li> 1 support plate</li><li> 10 wires dupont jumper male to male</li><li> 10 wires dupont jumper male to female</li><li> 1 solderless connection plate</li><li> 1 input/output connector shield for micro:bit (insert VITTASCIENCE link)</li></ul><ul><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Kitronik</p><p>Reference: KITRO5609</p>>

<KITRO5609>

<<p>Simply program your electronic components with this all board compatible prototyping board.</p><ul><li> Arduino board compatible prototyping kit (not included)</li><li> Includes :</li><li> LEDs of various colors</li><li> potentiometers</li><li> ohmic conductors</li><li> buttons</li><li> Dupont male to male connection cables</li><li> quick connection plate (breadboard)</li></ul><ul><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Vittascience</p><p>Reference : KPROTOARD</p>>

<X001JL45HB>

<<p>Protect your Raspberry Pi4 with this stylish case.</p><ul><li> Removable cover to easily snap on your Raspberry</li><li> Plastic case</li></ul><p>Manufacturer: Raspberry Pi</p><p>Reference : CASEOFFPI4</p>>

<CASEOFFPI4>

<<p>Power your Raspberry Pi4 with this official power supply.</p><ul><li> Power supply compatible with Raspberry Pi 400 and Raspberry Pi 4</li><li> Power: 15.3 W</li><li> Connectivity: USB-C</li></ul><p>Manufacturer: Raspberry Pi</p><p>Reference : ALIMPI4</p>>

<ALIMPI4>

<<p>Connect a keyboard to your Raspberry Pi.</p><ul><li> 79-key QWERTY keyboard with ergonomic and refined design</li><li> 3 USB 2.0 type A ports</li><li> USB-A to micro USB-B connection cable</li></ul><p>Manufacturer: Raspberry Pi</p><p>Reference : KBOFF</p>>

<KBOFF>

<<p>Connect a mouse to your Raspberry Pi.</p><ul><li> Mouse with 3 buttons and scroll wheel perfect for connecting to your Raspberry Pi</li></ul><p>Manufacturer: Raspberry Pi</p><p>Reference : MOOFF</p>>

<MOOFF>

<<p>Easily connect your RaspberryPi Zero WH to the network with this RJ45 LAN adapter.</p><ul><li> RJ45 LAN connection for fast connection</li><li> Small size takes up little space</li><li> Compatible with Raspberry Pi Zero and QuickPi (insert links)</li><li> Module dimensions: 60mm x 20mm x 20mm</li><li> Weight: 16g</li></ul><p>Manufacturer: QTS for Vittascience</p><p>Reference: ADAPRPIZERO</p>>

<ADAPRPIZERO>

<<p>Easily copy files from your microSD card with this adapter.</p><ul><li> Compatible with any microSD card</li><li> Random colors (blue, yellow, black, green, orange...)</li><li> Module size: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Vittascience</p><p>Reference: SDUSB</p>>

<SDUSB>

<>

<MINIUSB30CM>

<<p>8-channel LoRaWAN gateway to connect the IoT LoRa 868MHZ module to a WiFi network.</p><p>Power supply via mains socket or 5V via USB Type C.</p>>

<114992464>

<<p>Shield for ST-NUCLEO WB55RG board and Alphabot robot. <br></p><p><br></p><p>This adaptor has Grove ports (one I2C and one analog) to connect external sensors. <br></p><p><br></p><p>This shield is included in the Martian Robot Kit. <br></p>>

<3760327670337>

<<p>Here's the updated description formatted in HTML and translated into English:</p><p>```html</p><p><h2>USB A to USB Type-C Cable - 1 m: Connect Your Devices with Ease!</h2></p><p><p>This <strong>USB A to Type-C</strong> cable, measuring 1 meter, is the ideal accessory for connecting your compatible devices (smartphones, tablets, and other peripherals equipped with USB Type-C 2.0 ports) to your PC or charger. Its robust design ensures reliable connections.</p></p><p><h3>Main Features:</h3></p><p><ul></p><p><li><strong>Universal Compatibility</strong>: Works with all devices featuring <strong>USB Type-C 2.0</strong> connectivity, such as smartphones, tablets, and other modern gadgets.</li></p><p><li><strong>Smooth Data Transfer</strong>: Enjoy a theoretical maximum speed of <strong>480 Mbps</strong> for fast file transfers between your devices.</li></p><p><li><strong>Convenient Length</strong>: With a length of <strong>1 meter</strong>, this cable offers enough flexibility for comfortable use at your desk, in your living room, or on the go.</li></p><p></ul></p><p><h3>Important Note:</h3></p><p><p>This cable is only compatible with devices equipped with <strong>USB Type-C</strong> ports. It is <strong>not compatible</strong> with devices that have <strong>mini-USB</strong> or <strong>micro-USB</strong> connectors.</p></p><p><h3>Connector Type:</h3></p><p><ul></p><p><li><strong>USB A Male</strong> to <strong>USB Type-C Male</strong>.</li></p><p></ul></p><p><p>This cable is an essential accessory for all your Type-C connection needs, offering reliable performance and a practical design for everyday use!</p></p><p>```</p><p>Let me know if you need any further modifications!</p>>

<USBC>

<<p>Panneau solaire</p>>

<SOLARPANEL12V>

<<p>Record your measurements and sensor data with this microSD card compatible with the OpenLog module.</p><ul><li> microSD memory card</li><li> 128 MB of storage space</li><li> Caution, not suitable for recording photos or videos.</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Apacer</p><p>Reference: SD128MB</p>>

<SD1GO>

<<p>Increase the recording time of your projects, or give your Raspberry enough memory for your activities.</p><ul><li> microSDHC memory card</li><li> 16GB high performance</li><li> Specifications: UHS-I Class 1 and Video Speed Class 10 (V10)</li><li> Transfer speed up to 100MB/s</li><li> Delivered with its SD format adapter</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Apacer</p><p>Reference: SD16GB</p>>

<SD16GB>

<<p>Power your various projects, water pump or programmable cards with this battery box.</p><ul><li> For AAA batteries (4 batteries not included)</li><li> Easy to use thanks to the Grove connector</li><li> Built-in On/Off switch</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Vittascience</p><p>Reference : MBLOC6V</p><p>Remember to recycle your used batteries and small batteries by bringing them to a collection point (<a href='https://www.jerecyclemespiles.com'>https://www.jerecyclemespiles.com</a>)</p>>

<MBLOC6V>

<<p>Power your programmable boards or accessories with this AC/DC to USB plug.</p><ul><li> AC/DC power supply to USB 5V 2.1 A.</li><li> Power of 10.5 W</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Farnell</p><p>Reference: ALIMSECTUSB</p>>

<ALIMSECTUSB>

<<p>Power your projects with this 16340 size rechargeable Li-ion battery.</p><ul><li> Rechargeable Lithium-Ion battery 16340</li><li> Voltage delivered: 3.7 V</li><li> Capacity: 650 mAh</li><li> Battery protected against under and over voltage (2.5V and 4.25V)</li><li> Module dimensions: Ø16mm x 34 mm</li><li> Weight: 18g</li></ul><p>Examples of use : Power supply for the Maqueen robot</p><p>Reference : ACCULIION16340</p><p>WARNING : For reasons of air regulation, this product cannot be exported.</p><p>Reminder of the precautions for using Li-lon batteries</p><ul><li>do not short-circuit or overcharge the battery (risk of explosion or fire)</li><li>do not expose to high temperatures</li><li>Only use a charger that is compatible with this type of battery.</li><li>monitor the batteries when charging. If the temperature rises, stop the charging process</li><li>Do not place the batteries on a conductive surface.</li><li>Do not puncture the batteries</li><li>Follow the local waste disposal regulations.</li>>

<ACCULIION16340>

<<p>Power your projects with this 18650 rechargeable Li-ion battery.</p><ul><li> Rechargeable Lithium-Ion battery in 18650 format</li><li> Voltage delivered: 3.7 V</li><li> Capacity: 2500 mAh</li><li> Module dimensions: Ø18mm x 65 mm</li></ul><p>Examples of use : Power supply of the aluminum chassis with tracks</p><p>Manufacturer: Samsung</p><p>Reference : INR18650-25R</p><p>CAUTION: For reasons of aviation regulations, this product cannot be exported.</p><p>Reminder of the precautions for using Li-lon batteries</p><ul><li>do not short-circuit or overcharge the battery (risk of explosion or fire)</li><li>do not expose to high temperatures</li><li>Only use a charger that is compatible with this type of battery.</li><li>monitor the batteries when charging. If the temperature rises, stop the charging process</li><li>Do not place the batteries on a conductive surface.</li><li>Do not puncture the batteries</li><li>Follow the local waste disposal regulations.</li>>

<INR1865025R>

<<p>Power your projects with this rechargeable Li-ion battery in 14500 format.</p><ul><li> Rechargeable Lithium-Ion battery 14500 format</li><li> Voltage delivered: 3.7 V</li><li> Capacity: 800 mAh</li><li> Module dimensions: Ø14mm x 52 mm</li><li> Weight: 22g</li></ul><p>Examples of use : Power supply for the AlphaBot2 robot</p><p>Manufacturer: ICR14500</p><p>Reference: ICR14500</p><p>WARNING : For reasons of air regulation, this product can not be exported.</p><p>Reminder of the precautions to use Li-lon batteries</p><ul><li>do not short-circuit or overcharge the battery (risk of explosion or fire)</li><li>do not expose to high temperatures</li><li>Only use a charger that is compatible with this type of battery.</li><li>monitor the batteries when charging. If the temperature rises, stop the charging process</li><li>Do not place the batteries on a conductive surface.</li><li>Do not puncture the batteries</li><li>Follow the local waste disposal regulations.</li>>

<ICR14500>

<<p>Turn your continuously rotating servomotor into a real rolling robot.</p><ul><li> Wheel equipped with a pneumatic tire offering an excellent grip on all grounds.</li><li> Wheel adapted for FEETCEH servomotors</li><li> Dimensions of the module: Ø60mm x 8 mm</li></ul><p>Fixing screw included.</p><p>Examples of uses: Creation of a robot.</p><p>Reference : FS90R-W</p>>

<FS90RW>

<<p>Get started creating small electronics that require soldering with this 11-tool case.</p><ul><li> Easy storage in the fabric pouch with built-in elastic bands</li><li> Includes:</li><li> 30W economy soldering iron</li><li> A desoldering pump</li><li> a cutter</li><li> Miniature long nose pliers</li><li> Miniature cutting pliers</li><li> 3 Phillips screwdrivers: 6 x 125 mm, 5 x 75 mm and 2.4 x 75 mm</li><li> 3 flat screwdrivers: 6 x 125 mm, 5 x 75 mm and 2.4 x 75 mm</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Velleman</p><p>Reference : KITOUTILS</p>>

<KITOUTILS>

<>

<CROCOFE>

<>

<CROCOMA>

<<p>Easily capture images for your Vittascience artificial intelligence models with this HUE-HD Pro camera.</p><ul><li> Full HD 1080p</li><li> Weighted base with non-slip pad for a good grip</li><li> Led light and microphone integrated</li><li> Has a manual focus ring</li><li> Compatible with Windows, macOS, Linux and Chrome OS</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 499g</li></ul><p>Comes with cradle, USB cable, manual and 1 station user license.</p><p>Manufacturer: HUE</p><p>Reference: HUE-VIEWER-PRO</p>>

<HUEVIEWERPRO>

<<p>External 10,000 mAh battery to power programmable cards or other electronic devices.</p><p>Outputs: 1x 15W USB C or 2x 12W USB-A.</p><p>LED indicator for remaining charge level.</p><p>Comes with USB-C to USB-A cable.</p>>

<BPB011>

<<p>Allows you to recharge 6 Thymio robots - European plug</p>>

<TY45>

<<p>For 6 Thymio robots (not included) and charging hub.</p><p>Rigid suitcase case with foam for good hold during transport.</p>>

<TY44>

<>

<PRIMAONDA>

<<p>Store your programmable card and various sensors with this box with adjustable compartments.</p><ul><li> Plastic box with re-sealable lid</li><li> Easy to use with removable dividers</li><li> Module dimensions: 14 cm x 21 cm x 4.5 cm</li><li> Weight: 125 g</li></ul><p>Manufacturer: Vittascience</p><p>Reference : 3760327670191</p>>

<3760327670191>

<<p>Power your TI-Innovator Hub with this powerful dedicated battery.</p><ul><li> Features two USB ports</li><li> Easy to use with its central button</li><li> Built-in LED to quickly see the charge level</li><li> USB cable included</li><li> Module dimensions: 40mm x 20mm x 11mm</li><li> Weight: 10g</li></ul><p>Manufacturer: Enerpad</p><p>Reference: 03243480105668</p>>

<033317207992>

<<p>Teach Artificial Intelligence by showing what happens in the brain of a learning robot!</p><p>⚠ You must have an AlphAI software license to use this robot.</p><p><b>For the color of the robot, Learning Robots will contact you following your purchase to find out your choice.</b></p><p>The AlphAI robot is the benchmark at Learning Robots.</p><p>Its protective shell and numerous high-precision sensors make it the essential robot for learning artificial intelligence.</p><p>Thanks to its large number of sensors, this robot is the only one that will allow you to access all the activities offered by the AlphAI software.</p><p>Content :</p><p><li> Dimensions Robot with shell: 13*13*12 cm</p><p><li> Components of the AlphAI robot: Raspberry Pi Zero 2 W, wide-angle Pi camera, ultrasonic sensor, 5 infrared sensors, protective shell, a buzzer and a set of LEDs associated with the color of the robot.</p><p><li> We also provide two sets of 2 x 14500 batteries, a battery charger and a micro USB charger.</p><p><li> An adapter is provided to you if you live outside France.</p>>

<PR01>

<<p>License giving access to the AlphAI software for up to 2 stations for the AlphAI robot.</p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line following courses, mazes and other fun and educational activities.</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p>Learning Robots offers you numerous resources to get started with the robot and the software, as well as practical exercises for students with associated teacher sheets: consult the resources page!</p><p>Content :</p><p><li> The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p><li> Keep your activation key carefully as it has an unlimited validity period.</p><p><li> This key will allow you to activate the license on two computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p><li> You will be asked for it after installation, when you first launch the software.</p><p><a href="https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p>>

<PL0102>

<<p>License giving access to the AlphAI software for up to 30 stations for the AlphAI robot.</p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line following courses, mazes and other fun and educational activities.</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p>Learning Robots offers you numerous resources to get started with the robot and the software, as well as practical exercises for students with associated teacher sheets: consult the resources page!</p><p><p>Content :</p><p><li> The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p><li> Keep your activation key carefully as it has an unlimited validity period.</p><p><li> This key will allow you to activate the license on 30 computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p><li> You will be asked for it after installation, when you first launch the software.</p><p><a href="https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p></p>>

<PL0130>

<<p>This pack is aimed at those who simply want to discover the AlphAI solution.</p><p>It contains a robot, a 2-station license, an individual arena and a carrying bag.</p><p>For the color of the robot, Learning Robots will contact you following your purchase to find out your choice.</p><p>This pack will allow you to try the AlphAI solution and evolve the robot in an individual arena. If you are curious to discover how AI works through an educational tool and interface, then this pack is for you! It contains:</p><p><b>1 license 2 seats for the AlphAI robot</b></p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line-following courses, mazes and other fun and educational activities.edge</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p><b>1 AlphAI robot</b></p><p>The AlphAI robot is the benchmark at Learning Robots. Its protective shell and numerous high-precision sensors make it the essential robot for learning artificial intelligence.</p><p>Thanks to its large number of sensors, this robot is the only one that will allow you to access all the activities offered by the AlphAI software.</p><p><b>1 individual arena</b></p><p>The individual track allows a single robot to evolve with the AlphAI software.</p><p>It allows you to do many activities such as line following or obstacle avoidance, but is not suitable for other key activities such as robot racing.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p><b>1 carrying bag</b></p><p>This bag allows reliable and durable storage of equipment, protecting it from dust and humidity but also allows you to transport arenas, robots as well as the accessories provided (tapes, batteries, refills, etc.).</p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: check out the resources page!</p><p><b> Content : </b></p><p><li> <b>1 license 2 seats for the AlphAI robot</b></p><p>The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p>Keep your activation key carefully as it has an unlimited validity period.</p><p>This key will allow you to activate the license on two computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p>You will be asked for it after installation, when you first launch the software.</p><p><a href="https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p><p><li> <b>1 robot</b></p><p>Dimensions Robot with shell: 13*13*12 cm</p><p>Components of the AlphAI robot: Raspberry Pi Zero 2 W, wide-angle Pi camera, ultrasonic sensor, 5 infrared sensors, protective shell, a buzzer and a set of LEDs associated with the color of the robot.</p><p>We also provide two sets of 2 x 14500 batteries, a battery charger and a micro USB charger.</p><p>An adapter is provided to you if you live outside France.</p><p><li> <b>1 individual arena</b></p><p>4 long red boards (78.4x12.5x0.8 cm)</p><p>1 printed tarpaulin, intended to be placed on the ground or on a table (80x80 cm)</p><p>4 “foot” type supports and 2 “connector” type supports</p><p><li> <b>Transport bag :</b></p><p>Interior dimensions L 87 x D 25 x H 21 cm</p><p>Weight: approximately 0.8 kg</p><p>Total weight: 2.9kg</p>>

<PP01>

<<p>This pack is aimed at those who wish to use all the functionalities of the AlphAI solution.</p><p>It contains 2 robots, a 2-station license, a small race arena, and a transport bag.</p><p><b>For robot colors, Learning Robots will contact you following your purchase to find out your choices.</b></p><p>Designed for those who want to explore a more in-depth solution, this pack includes everything you need to use AlphAI to its full potential. In this beginner's pack, you will find two robots which can be put into competition. This pack contains:</p><p><b>1 license 2 seats for the AlphAI robot</b></p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line-following courses, mazes and other fun and educational activities.edge</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p><b>2 AlphAI robots</b></p><p>The AlphAI robot is the benchmark at Learning Robots. Its protective shell and numerous high-precision sensors make it the essential robot for learning artificial intelligence.</p><p>Thanks to its large number of sensors, this robot is the only one that will allow you to access all the activities offered by the AlphAI software.</p><p><b>1 “small race” arena</b></p><p>The “small race” kit allows you to set up a racing arena for 3 robots measuring 160x80cm, divisible in two.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p><b>1 carrying bag</b></p><p>This bag allows reliable and durable storage of equipment, protecting it from dust and humidity but also allows you to transport arenas, robots as well as the accessories provided (tapes, batteries, refills, etc.).</p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: <a href="https://learningrobots.ai/les-ressources/">check out the resources page!</a></p><p><b>Content :</b></p><p><li> <b>1 license 2 seats for the AlphAI robot</b></p><p>The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p>Keep your activation key carefully as it has an unlimited validity period.</p><p>This key will allow you to activate the license on two computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p>You will be asked for it after installation, when you first launch the software.</p><p><a href="https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p><p><li> <b>2*1 robot</b></p><p>Dimensions Robot with shell: 13*13*12 cm</p><p>Components of the AlphAI robot: Raspberry Pi Zero 2 W, wide-angle Pi camera, ultrasonic sensor, 5 infrared sensors, protective shell, a buzzer and a set of LEDs associated with the color of the robot.</p><p>We also provide two sets of 2 x 14500 batteries, a battery charger and a micro USB charger.</p><p>An adapter is provided to you if you live outside France.</p><p><li> <b>1 “Small Race” Arena</b></p><p>7 long red boards (78.4x12.5x0.8cm) and 1 short black board (39.2x12.5x0.8 cm)</p><p>1 “small racing banner” board (39.2x7.25x0.8 cm)</p><p>1 rectangular white tarpaulin (160x80 cm)</p><p>6 “foot” supports and 4 “connector” supports.</p><p>1 black tape (for the line tracking activity).</p><p><li> <b>Transport bag</b></p><p>Interior dimensions L 87 x D 25 x H 21 cm</p><p>Weight: approximately 0.8 kg</p><p><li>Total weight: 5 kg</p>>

<PP02>

<<p>This pack is aimed at teachers and trainers who wish to introduce the AlphAI solution to their class.</p><p>It contains 6 robots, a 30-station license, a large race arena and a transport bag.</p><p><b>For robot colors, Learning Robots will contact you following your purchase to find out your choices.</b></p><p>The Confirmed Pack is ideal for teachers and trainers who wish to introduce the AlphAI solution to their class. He understands :</p><p><b>1 30-seat license for the AlphAI robot</b></p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line-following courses, mazes and other fun and educational activities.edge</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p><b>6 AlphAI robots</b></p><p>The AlphAI robot is the benchmark at Learning Robots. Its protective shell and numerous high-precision sensors make it the essential robot for learning artificial intelligence.</p><p>Thanks to its large number of sensors, this robot is the only one that will allow you to access all the activities offered by the AlphAI software.</p><p><b>1 “big race” arena</b></p><p>The “big race” kit allows you to set up numerous arena layouts, from 80x80 cm to 240x240 cm (or even 320x160 cm), which can accommodate up to 6 robots.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p><b>1 carrying bag</b></p><p>This bag allows reliable and durable storage of equipment, protecting it from dust and humidity but also allows you to transport arenas, robots as well as the accessories provided (tapes, batteries, refills, etc.).</p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: <a href="https://learningrobots.ai/les-ressources/">check out the resources page!</a></p><p><b> Content : </b></p><p><li> <b>1 30-seat license for the AlphAI robot</b></p><p>The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p>Keep your activation key carefully as it has an unlimited validity period.</p><p>This key will allow you to activate the license on thirty computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p>You will be asked for it after installation, when you first launch the software.</p><p><a href="https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p><p><li> <b>6*1 robot</b></p><p>Dimensions Robot with shell: 13*13*12 cm</p><p>Components of the AlphAI robot: Raspberry Pi Zero 2 W, wide-angle Pi camera, ultrasonic sensor, 5 infrared sensors, protective shell, a buzzer and a set of LEDs associated with the color of the robot.</p><p>We also provide two sets of 2 x 14500 batteries, a battery charger and a micro USB charger.</p><p>An adapter is provided to you if you live outside France.</p><p><li> <b>1 “Great Race” Arena</b></p><p>12 long red boards (78.4x12.5x0.8 cm), 1 long black board (78.4x12.5x0.8 cm), and 1 short black board (39.2x12.5x0.8 cm)</p><p>1 “large racing banner” board (78.4x7.25x0.8 cm) and 1 “small racing banner” board (39.2x7.25x0.8 cm)</p><p>2 small printed tarpaulins (80x80 cm) and 3 rectangular white tarpaulins (80x160 cm)</p><p>12 “foot” supports and 12 “connector” supports</p><p>1 painter's tape (to assemble the tarpaulins) and 1 black tape (for the line tracking activity).</p><p><li> <b>Transport bag</b></p><p>Interior dimensions L 87 x D 25 x H 21 cm</p><p>Weight: approximately 0.8 kg</p><p><li>Total weight: 10.7 kg</p>>

<PP03>

<<p>This pack is aimed at teachers and trainers who wish to have expert use of the AlphAI solution with their class. It is specially designed for a large number of students. It contains 10 robots, a 30-station license, a very large racing arena and two transport bags.</p><p><b>For robot colors, Learning Robots will contact you following your purchase to find out your choices. </b></p><p>The class pack meets the needs of experienced high school and higher education teachers and trainers who wish to have expert use of the AlphAI solution with their class. The high number of robots allows classes to perform advanced programming.</p><p>This pack includes:</p><p><li> 1 30-seat license for the AlphAI robot AlphAI is software that combines robotics and AI. <p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line-following courses, mazes and other fun and educational activities.edge Once a software license is purchased, you will be able to purchase additional robots without a license. </p></p><p><li> 10 AlphaAI robots The AlphAI robot is the benchmark at Learning Robots.</p><p><p>Its protective shell and numerous high-precision sensors make it the essential robot for learning artificial intelligence. Thanks to its large number of sensors, this robot is the only one that will allow you to access all the activities offered by the AlphAI software. </p></p><p><li> 1 “very big race” arena</p><p><p>The “very large race” kit allows you to set up as many arena layouts as possible and allows a race for 10 robots with a dimension of 240x480 cm It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc. The boards are made of Jura pine. They were entirely made in France by Olivier Sauge <a href="artisans-du-bois.com">(artisans-du-bois.com)</a>. </p></p><p><li> 2 carrying bag</p><p><p>This bag allows reliable and durable storage of equipment, protecting it from dust and humidity but also allows you to transport arenas, robots as well as the accessories provided (tapes, batteries, refills, etc.). </p></p><p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: check out their <a href="https://learningrobots.ai/les-ressources/"> resources page! </a></p></p><p><b>Content : </b></p><p><li> <b>1 30-seat license for the AlphAI robot</b></p><p><p> The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux. Keep your activation key carefully as it has an unlimited validity period. This key will allow you to activate the license on thirty computers simultaneously. It is possible to change the workstations on which the license is activated. You will be asked for it after installation, when you first launch the software.</p><p><a href="https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p><p><li> <b>10*1 robot</p> </b><p>Dimensions Robot with shell: 13*13*12 cm</p><p>Components of the AlphAI robot: Raspberry Pi Zero 2 W, wide-angle Pi camera, ultrasonic sensor, 5 infrared sensors, protective shell, a buzzer and a set of LEDs associated with the color of the robot.</p><p>We also provide 20 sets of 2 x 14500 batteries, two large battery chargers and 10 micro USB chargers. An adapter is provided to you if you live outside France.</p> <p><li> <b>1 “Very Big Race” Arena </b></p> <p>15 long red boards (78.4x12.5x0.8 cm) and 4 long black boards (78.4x12.5x0.8 cm)</p> <p>2 “large racing banner” board (78.4x7.25x0.8 cm</p> <p>2 rectangular white tarpaulins (240x160 cm)</p> <p>9 “foot” supports and 22 “connector” supports</p> <p>1 painter's tape (to assemble the tarpaulins) and 1 black tape (for the line tracking activity).</p> <p><b><li>l2*1 Carrying bag</p></b> <p>Interior dimensions L 87 x D 25 x H 21 cm</p> <p>Weight: approximately 0.8 kg </p> <p> <li> <b>Total weight: 14.9 kg</b> </p>>

<PP04>

<<p>This arena is ideal for hosting a robot.</p><p>The individual track allows a single robot to evolve with the AlphAI software.</p><p>It allows you to do many activities such as line following or obstacle avoidance, but is not suitable for other key activities such as robot racing.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>Content :</p><p><li> 4 long red boards (78.4x12.5x0.8 cm)</p><p><li> 1 printed tarpaulin, intended to be placed on the ground or on a table (80x80 cm)</p><p><li> 4 “foot” type supports and 2 “connector” type supports</p><p>Weight: 0.9 kg</p>>

<PA01>

<<p>This arena is ideal for hosting up to 4 robots.</p><p>It is divisible into two small arenas."</p><p>The “small race” kit allows you to set up a racing arena for 3 robots measuring 160x80cm, divisible in two.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p> <p>The transport bag allows reliable and durable storage of equipment, protecting it from dust and humidity, and allows you to transport the arena but also robots and accessories.</p> <p>Content :</p><li> 7 long red boards (78.4x12.5x0.8cm) and 1 short black board (39.2x12.5x0.8 cm)<li>1 “small racing banner” board (39.2x7.25x0.8 cm)<li>1 rectangular white tarpaulin (160x80 cm)<li>6 “foot” supports and 4 “connector” supports.<li>1 black tape (for the line tracking activity)<li>Optional carrying bag:<li>Interior dimensions L 87 x D 25 x H 21 cm<li>Weight: 3.4 kg>

<PA01S>

<<p>This arena is ideal for hosting up to 4 robots.</p><p>It is divisible into two small arenas.</p><p>The “small race” kit allows you to set up a racing arena for 3 robots measuring 160x80cm, divisible in two.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>Content :</p><p><li> "7 long red boards (78.4x12.5x0.8cm) and 1 short black board (39.2x12.5x0.8 cm)</p><p><li> 1 “small racing banner” board (39.2x7.25x0.8 cm)</p><p><li> 1 rectangular white tarpaulin (160x80 cm)</p><p><li> 6 “foot” supports and 4 “connector” supports.</p><p><li> 1 black tape (for the line tracking activity).</p><p>Weight: 2.6 kg"</p>>

<PA02>

<<p>This arena is ideal for hosting up to 4 robots.</p><p>It is divisible into two small arenas.</p><p>The “small race” kit allows you to set up a racing arena for 3 robots measuring 160x80cm, divisible in two.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>Content :</p><li>"7 long red boards (78.4x12.5x0.8cm) and 1 short black board (39.2x12.5x0.8 cm)<li>1 “small racing banner” board (39.2x7.25x0.8 cm<li>1 rectangular white tarpaulin (160x80 cm)<li>6 “foot” supports and 4 “connector” supports.<li>1 black tape (for the line tracking activity).<li>Carrying bag:</p><p>Interior dimensions L 87 x D 25 x H 21 cm</p><p>Weight: 3.4 kg"</p>>

<PA02S>

<<p>This arena is ideal for hosting up to 6 robots.</p><p>It is modular and allows numerous arrangements depending on the activities.</p><p>The “big race” kit allows you to set up numerous arena layouts, from 80x80 cm to 240x240 cm (or even 320x160 cm), which can accommodate up to 6 robots.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>Content :</p><p><li> 12 long red boards (78.4x12.5x0.8 cm), 1 long black board (78.4x12.5x0.8 cm), and 1 short black board (39.2x12.5x0.8 cm)</p><p><li> 1 “large racing banner” board (78.4x7.25x0.8 cm) and 1 “small racing banner” board (39.2x7.25x0.8 cm)</p><p><li> 2 small printed tarpaulins (80x80 cm) and 3 rectangular white tarpaulins (80x160 cm)</p><p><li> 12 “foot” supports and 12 “connector” supports</p><p><li> 1 painter's tape (to assemble the tarpaulins) and 1 black tape (for the line tracking activity).</p><p>Weight: 6.7 kg</p>>

<PA03>

<<p>This arena is ideal for hosting up to 6 robots.</p><p>It is modular and allows numerous arrangements depending on the activities.</p><p>The “big race” kit allows you to set up numerous arena layouts, from 80x80 cm to 240x240 cm (or even 320x160 cm), which can accommodate up to 6 robots.</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>The transport bag allows reliable and durable storage of equipment, protecting it from dust and humidity, and allows you to transport the arena but also robots and accessories.</p><p>Content :<li>12 long red boards (78.4x12.5x0.8 cm), 1 long black board (78.4x12.5x0.8 cm), and 1 short black board (39.2x12.5x0.8 cm<li>1 “large racing banner” board (78.4x7.25x0.8 cm) and 1 “small racing banner” board (39.2x7.25x0.8 cm)<li>2 small printed tarpaulins (80x80 cm) and 3 rectangular white tarpaulins (80x160 cm)<li>12 “foot” supports and 12 “connector” supports<li>1 painter's tape (to assemble the tarpaulins) and 1 black tape (for the line tracking activity).<li>Transport bag :</p><p>Interior dimensions L 87 x D 25 x H 21 cm</p><p>Weight: 7.5 kg</p>>

<PA03S>

<<p>This arena is ideal for hosting up to 10 robots.</p><p>It is modular and allows many arrangements depending on the activities.</p><p>The “very large race” kit allows you to set up as many arena layouts as possible and allows a race for 10 robots with a dimension of 240x320 cm</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>Content :</p><p><li> 15 long red boards (78.4x12.5x0.8 cm) and 4 long black boards (78.4x12.5x0.8 cm)</p><p><li> 2 “large racing banner” board (78.4x7.25x0.8 cm)</p><p><li> 2 large rectangular white tarpaulins (240x160 cm)</p><p><li> 9 “foot” supports and 22 “connector” supports</p><p><li> 1 painter's tape (to assemble the tarpaulins) and 1 black tape (for the line tracking activity).</p><p>Weight: 8.5 kg</p>>

<PA04>

<<p>This arena is ideal for hosting up to 10 robots.</p><p>It is modular and allows many arrangements depending on the activities.</p><p>The “very large race” kit allows you to set up as many arena layouts as possible and allows a race for 10 robots with a dimension of 240x320 cm</p><p>It allows you to do all the activities available on the software such as robot racing, line following, obstacle avoidance, etc.</p><p>The boards are made of Jura pine. They were entirely made in France by Olivier Sauge (artisans-du-bois.com).</p><p>The transport bag allows reliable and durable storage of equipment, protecting it from dust and humidity, and allows you to transport the arena but also robots and accessories.</p><p>Content :<li>15 long red boards (78.4x12.5x0.8 cm) and 4 long black boards (78.4x12.5x0.8 cm)<li>2 “large racing banner” board (78.4x7.25x0.8 cm)<li>2 large rectangular white tarpaulins (240x160 cm<li>9 “foot” supports and 22 “connector” supports<li>1 painter's tape (to assemble the tarpaulins) and 1 black tape (for the line tracking activity).<li>Transport bag :<li>Interior dimensions L 87 x D 25 x H 21 cm<li>Weight: 9.3 kg</p>>

<PA04S>

<<p>This bag can hold the arenas with the robots and accessories, for transport and storage.</p><p>This bag allows reliable and durable storage of equipment, protecting it from dust and humidity but also allows you to transport arenas, robots as well as the accessories provided (tapes, batteries, refills, etc.).</p><p>Dimensions: 87*25*21 cm.</p><p>Weight: approximately 0.8 kg</p><p>Straps and zip closure</p>>

<CA16>

<<p>License giving access to the AlphAI software on a Thymio robot.</p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Complete line-following courses, mazes and other fun and educational activities.</p><p>The software is compatible with Thymio II Wireless.</p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: check out <a href="https://learningrobots.ai/les-ressources/"> the resources page!</a></p><p>Content :</p><p><li> The software is designed to run on a computer without an internet connection. You will need to connect the Bluetooth key provided with the Thymio to communicate with the robot. It is available on PC, Mac and Linux.</p><p><li> Keep your activation key carefully as it has an unlimited validity period.</p><p><li> This key will allow you to activate the license on a Thymio II Wireless robot.</p><p><li> You will be asked for it after the first connection to the robot.</p><p><li> <a href=https://learningrobots.ai/selectionner-langue-telechargement/">Download the software</a></p>>

<PL0301>

<<p>License giving access to the AlphAI Software for up to 2 stations for all types of robots.</p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line following courses, mazes and other fun and educational activities.</p><p>This license can be activated for all of the following robots: AlphAI, Thymio II Wireless, and mBot.</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: <a href="https://learningrobots.ai/les-ressources/>check out the resources page!</a></p><p>Content :</p><p><li> The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p><li> Keep your activation key carefully as it has an unlimited validity period.</p><p><li> This key will allow you to activate the license on two computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p><li> You will be asked for it after installation, when you first launch the software.</p><p><li> <a href="https://learningrobots.ai/selectionner-langue-telechargement/>Download the software</a></p>>

<PL0002>

<<p>License giving access to the AlphAI Software for up to 30 stations for all types of robots.</p><p>AlphAI is software that combines robotics and AI.</p><p>Configure different types of learning, from beginner mode (load already optimized configurations) to expert mode (control all AI parameters). Visualize the algorithms: K nearest neighbors, deep learning, etc. Train your robots intuitively. Perform robot races, line following courses, mazes and other fun and educational activities.</p><p>This license can be activated for all of the following robots: AlphAI, Thymio II Wireless, and mBot.</p><p>Once a software license is purchased, you will be able to purchase additional robots without a license.</p><p>Learning Robots offers you numerous resources to get started with the software, as well as practical exercises for students with associated teacher sheets: <a href="https://learningrobots.ai/les-ressources/">check out the resources page!</a></p><p>Content :</p><p><li>The software is designed to run on a computer without an internet connection. However, it requires a wifi or bluetooth connection to communicate with the robot. It is available on PC, Mac and Linux.</p><p><li>Keep your activation key carefully as it has an unlimited validity period.</p><p><li>This key will allow you to activate the license on 30 computers simultaneously. It is possible to change the workstations on which the license is activated.</p><p><li>You will be asked for it after installation, when you first launch the software.</p><p><li> <a href="https://learningrobots.ai/selectionner-langue-telechargement/> Download the software</a></p>>

<PL0030>

<<p>The “3D brake light with micro:bit card” kit introduces you to the concepts of block programming, and enables you to follow a complete project approach, transforming a position light into an automatic brake light. The brake light supplied is to be assembled and soldered, but the parts to be 3D printed are not supplied.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème published by Bordas. 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>One micro:bitV2 board.</p><p>24 LED RGB ring.</p><p>One switch.</p><p>3 LR03 battery coupler.</p><p>9 V battery clip.</p><p>Set of 4 LR06 batteries.</p><p>3 mm Plexiglas machining.</p><p>One set of cables.</p><p>One set of screws.</p><p>Translated with DeepL.com (free version)</p>>

<277750>

<<p>The “3D brake light without micro:bit card” kit introduces you to the concepts of block programming, and enables you to follow a complete project approach, transforming a position light into an automatic brake light. The brake light supplied is to be assembled and soldered, but the parts to be 3D printed are not supplied.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème published by Bordas. 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>24 LED RGB ring.</p><p>One switch.</p><p>3 LR03 battery coupler.</p><p>9 V battery clip.</p><p>Set of 4 LR06 batteries.</p><p>3 mm Plexiglas machining.</p><p>One set of cables.</p><p>One set of screws.</p>>

<277747>

<<p>These 3D parts go with kits 277747 and 277750 if you don't have the time or ability to print your brake light with a 3D printer.</p><p>Contents:</p><p>One 3D brake light bracket.</p><p>Three 3D brake light hooks.</p>>

<277764>

<<p>The “connected stud with micro:bit card” kit introduces the concepts of block programming, and enables you to identify and compare technical solutions to meet certain standards. The connected plot is delivered ready to assemble, but the parts to be 3D printed are not supplied.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème, published by Bordas. 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>A micro:bit v2 card.</p><p>Grove micro:bit v2 Shield.</p><p>Grove 24 LED RGB ring.</p>>

<277751>

<<p>The "connected plot without micro:bit card" kit enables you to tackle the notions of block programming, to identify and compare technical solutions in order to meet certain standards. The connected plot is delivered ready to assemble; parts to be 3D printed are not supplied.</p><p>Teaching support in connection with these kits is offered on the Cahier de technologie 5ème published by Bordas. The 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also on sale.</p><p>This kit is part of a set of 4 kits featured in the Cahier de technologie 5ème aux éditions Bordas.</p><p>Kit contents:</p><p>A Grove micro:bit v2 Shield.</p><p>A Grove 24 LED RGB ring.</p>>

<277748>

<<p>These 3D parts go with kits 277748 and 277751 if you don't have the time or possibility to print your connected stud with a 3D printer.</p><p>3D base.</p><p>3D cover.</p>>

<277765>

<<p>The “3D lawnmower robot with micro:bit card” kit enables you to learn block programming and to identify and repair faults. The lawnmower robot is delivered ready to assemble and solder, but parts for 3D printing are not supplied.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème, published by Bordas. 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>micro:bit v2 board.</p><p>A motor shield for micro:bit.</p><p>Two double output geared motors.</p><p>Two motor gearbox output shafts.</p><p>One switch.</p><p>Two wheels.</p><p>One Grove ultrasonic sensor.</p><p>Two Grove line followers.</p><p>One continuous rotation mini servomotor.</p><p>One 9 V 1200 mAh battery.</p><p>9 V battery clip.</p><p>One set of wires.</p><p>One set of Grove cables with female pins.</p><p>One set of screws.</p>>

<277745>

<<p>The “3D lawnmower robot without micro:bit card” kit enables you to learn block programming and to identify and repair faults. The lawnmower robot is delivered ready to assemble and solder, but parts for 3D printing are not supplied.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème, published by Bordas. 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>A motor shield for micro:bit.</p><p>Two double output geared motors.</p><p>Two geared motor output shafts.</p><p>One switch.</p><p>Two wheels.</p><p>One Grove ultrasonic sensor.</p><p>Two Grove line followers.</p><p>One continuous rotation mini servomotor.</p><p>One 9 V 1200 mAh battery.</p><p>9 V battery clip.</p><p>One set of wires.</p><p>One set of Grove cables with female pins.</p><p>One set of screws.</p>>

<277744>

<<p>These 3D parts go with kits 277744 and 277745 if you don't have the time or possibility to print your robot lawnmower with a 3D printer.</p><p>Contents:</p><p>3D chassis.</p><p>One 3D hood.</p><p>Two 3D motor mounts.</p><p>A 3D idler wheel assembly.</p><p>A 3D mini lawnmower blade equivalent.</p>>

<277763>

<<p>The “3D connected mats with micro:bit card” kit enables you to learn block programming concepts and to identify and repair faults. The connected mats are delivered ready to assemble and solder, without the parts to be 3D printed.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème published by Bordas. The 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>A micro:bitV2 board.</p><p>A set of cables with crocodile clips.</p><p>A set of grey cardboard machinings.</p><p>A set of aluminum sheets.</p>>

<277752>

<<p>The “3D connected mats without micro:bit card” kit lets you get to grips with the concepts of block programming, and identify and repair faults. The connected mats are delivered ready to assemble and solder, but the parts to be 3D printed are not supplied.</p><p>Pedagogical support for these kits is provided in the Cahier de technologie 5ème published by Bordas. 3D files are available when you purchase a kit or the Cahier de technologie 5ème for your students. Printed models are also available.</p><p>This kit is part of a set of 4 kits included in the 5ème technologie manuals published by Bordas.</p><p>Kit contents :</p><p>A set of cords with crocodile clips.</p><p>A set of grey cardboard machinings.</p><p>A set of aluminum sheets.</p>>

<277749>

<<p>These 3D parts go with kits 277749 and 277752 if you don't have the time or ability to print your connected plot with a 3D printer.</p><p>Contents:</p><p>3D hinge.</p>>

<277766>

<<p>Special back-to-school offer. Valid up to and including September 30, 2023!<p><br><p>Subscription to the Vittascience Premium platform with unlimited access to the class management module for 1 teacher (50 students) during 1 year. (one educational establishment) <br></p><p>Unlimited creation and sharing of activities <br></p><p>Access to the Vittascience resource bank <br></p><p>Automatic correction <br></p><p>Projects saved in the cloud <br></p><p>1 teacher = 400 learners and 20 groups <br></p><p>Secure access via the GAR <br></p><p>1h of shared support <br></p><p>Premium support - response within 24 working hours <br></p><p><br><br><br><hr>This product is compatible with the following card(s) : <br> - Microbit<br> - QuickPi and RaspberryPi<br> - STM32 NUCLEI-WB55RG and NUCLEO-WL55<br> - Arduino Uno and Nano<br></p>>

<3760327670207>

<<p>Subscription to the Vittascience Premium platform with unlimited access to the classroom management module for less than 300 students during 1 year. (limited to one educational establishment).</p><br></p><p>Create and share unlimited activities.<br></p><p>Access to the Vittascience resource bank.<br></p><p>Automatic correction.<br></p><p>Projects saved in the cloud.<br></p><p>Create unlimited groups.<br></p><p>Secure access via the GAR.<br></p><p>1 hour of dedicated videoconference support.<br></p><p>Premium support - response within 24 hours.>

<3760327670214300>

<<p>Subscription to the Vittascience Premium platform with unlimited access to the classroom management module for 300 to 600 students during 1 year. (limited to one educational establishment).</p><br></p><p>Create and share unlimited activities.<br></p><p>Access to the Vittascience resource bank.<br></p><p>Automatic correction.<br></p><p>Projects saved in the cloud.<br></p><p>Create unlimited groups.<br></p><p>Secure access via the GAR.<br></p><p>1 hour of dedicated videoconference support.<br></p><p>Premium support - response within 24 hours.>

<3760327670214500>

<<p>Subscription to the Vittascience Premium platform with unlimited access to the classroom management module for 600 to 900 students during 1 year. (limited to one educational establishment).</p><br></p><p>Create and share unlimited activities.<br></p><p>Access to the Vittascience resource bank.<br></p><p>Automatic correction.<br></p><p>Projects saved in the cloud.<br></p><p>Create unlimited groups.<br></p><p>Secure access via the GAR.<br></p><p>1 hour of dedicated videoconference support.<br></p><p>Premium support - response within 24 hours.>

<3760327670214700>

<<p>Subscription to the Vittascience Premium platform with unlimited access to the classroom management module for 900 to 1,200 students during 1 year. (limited to one educational establishment).</p><br></p><p>Create and share unlimited activities.<br></p><p>Access to the Vittascience resource bank.<br></p><p>Automatic correction.<br></p><p>Projects saved in the cloud.<br></p><p>Create unlimited groups.<br></p><p>Secure access via the GAR.<br></p><p>1 hour of dedicated videoconference support.<br></p><p>Premium support - response within 24 hours.>

<3760327670214900>

<<p>Subscription to the Vittascience Premium platform with unlimited access to the classroom management module for more than 1,200 students during 1 year. (limited to one educational establishment).</p><br></p><p>Create and share unlimited activities.<br></p><p>Access to the Vittascience resource bank.<br></p><p>Automatic correction.<br></p><p>Projects saved in the cloud.<br></p><p>Create unlimited groups.<br></p><p>Secure access via the GAR.<br></p><p>1 hour of dedicated videoconference support.<br></p><p>Premium support - response within 24 hours.>

<37603276702141200>

<>

<9782212678260>

<>

<9782416002960>

<<p>This Internet activity book is part of a series of books adapted for young children to introduce new technologies.</p> Language : French>

<DigitalKidzInternet>

<<p>This activity book is part of a series of books designed to introduce new technologies to young children.</p>>

<DigitalKidzProgrammation>

<>

<DigitalKidzIA>

<>

<9782416008221>

<>

<9782409029271>

<>

<9782100796021>

<<p>Discover the book "C'est (pas) moi c'est l'IA" written by Didier Roy and Pierre-Yves Oudeyer, published by Nathan Editions.</p> <br> <p>In our hyperconnected world, artificial intelligence (AI) has become an essential topic.</p> <p>This book, accessible from the age of 12, demystifies this complex and often intimidating subject for young people.</p> <p>This intelligent and funny guide is aimed at both teenagers and their parents, answering all their questions about generative AI, its advantages, its dangers, and its creative potential.</p> <p>AI is now capable of producing text, images, and videos in seconds. But how does it really work?</p> <p>This book, written with pedagogy and humor, explains how to take advantage of these technologies creatively while avoiding pitfalls like fake news and deep fakes.</p> <p>It offers young people an informed and critical approach so they can remain in control of their use of AI.</p> <p>If you're looking for a resource to introduce AI to your students, children, or just for yourself, this book is a valuable tool, designed to inform without fear, while encouraging exploration and reflection.</p> <p>The kind and playful tone makes this guide essential for taming AI while keeping a vigilant eye.</p> <p>A must-have for any educational library!</p>>

< cestpasmoicestlialivre>

<<p>Gift card worth 30 € </br></p><p></br></p><p>Can be used once in the Vittascience store, the card is valid for 1 year from purchase. </br></p><p>After purchase, you will receive it by email and can download and print it to give to loved ones. </br></p>>

<KDO30>

<>

<KDO50>

<<p>Gift card worth 100 € </br></p><p></br></p><p>Can be used once in the Vittascience store, the card is valid for 1 year from purchase. </br></p><p>After purchase, you will receive it by email and can download and print it to give to loved ones. </br></p>>

<KDO100>

<<p>Gift card worth 150 € </br></p><p></br></p><p>Can be used once in the Vittascience store, the card is valid for 1 year from purchase. </br></p><p>After purchase, you will receive it by email and can download and print it to give to loved ones. </br></p>>

<KDO150>

<<p>Gift card worth 200 € </br></p><p></br></p><p>Can be used once in the Vittascience store, the card is valid for 1 year from purchase. </br></p><p>After purchase, you will receive it by email and can download and print it to give to loved ones. </br></p>>

<KDO200>